Ultra Miniature Microphone
Ultra Miniature Microphone
 |
 GOLD HQ MD DAT MINIDISC ULTRA MINIATURE MICROPHONE $18.04 Time Remaining: 7d 8h 28m Buy It Now for only: $18.04 |
 ANGLED PRO GOLD MD MINIDISC ULTRA MINIATURE MICROPHONE $22.79 Time Remaining: 15d 21h 21m Buy It Now for only: $22.79 |
 ANGLED HQ MD DAT MINIDISC ULTRA MINIATURE MICROPHONE $19.94 Time Remaining: 15d 21h 12m Buy It Now for only: $19.94 |
|
|
Akg C516ml Miniature Instrument Microphone $189 The AKG C 516 ML is a lightweight cardioid mini microphone for use on accordions, guitar speakers, piano and keyboard/organ cabinets. The included screws and double-sided, solvent-free adhesive pads make it easy to install the microphone on your musical instrument or amp exactly where you need it. Using two C 516 MLs (one on the bass and one on the treble side) and an optional B 29 L battery power supply is an ideal way to mic up an accordion. The C 516 ML is the only version available and can be used with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters. Cardioid instrument microphone with miniature mounting bracket High mechanical-noise attenuation Including wireless direct adapter for easy use with AKG pocket transmitters Detachable microphone cable Ideal for miking up accordions and guitar, piano, keyboard, or organ amplifiers Includes 2 double-sided adhesive rubber plates, 3 countersunk bolts (3 x 30 MM), 3 self-tapping screws (2.9 x 13 mm), A 400 adapter, adhesive compound, H 516 Mount Plate, microphone bag, and W44 windscreen |
|
|
Akg C519m Miniature Cardioid Condenser Microphone $249 The AKG C519 M clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo). Room to move for the wind section at last! Its tight cardioid polar pattern makes the C 519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful, and clear sound. The C 519 M features an integrated, switchable bass cut for adjusting the microphone's frequency response to your instrument's sound. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters. The C 519 M is designed for use external phantom power. Miniature condenser clip-on microphone for wind instruments, drums, and percussions Miniature gooseneck for accurate microphone alignment Including wireless direct adapter for easy use with AKG pocket transmitters Detachable microphone cable Transducer shock mount for high mechanical-noise rejection |
|
|
Used Akg C519m Miniature Cardioid Condenser Microphone $226.59 The AKG C519 M clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo). Room to move for the wind section at last! Its tight cardioid polar pattern makes the C 519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful, and clear sound. The C 519 M features an integrated, switchable bass cut for adjusting the microphone's frequency response to your instrument's sound. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters. The C 519 M is designed for use external phantom power. Miniature condenser clip-on microphone for wind instruments, drums, and percussions Miniature gooseneck for accurate microphone alignment Including wireless direct adapter for easy use with AKG pocket transmitters Detachable microphone cable Transducer shock mount for high mechanical-noise rejection |
|
|
Akg C518ml Miniature Cardioid Condenser Microphone $189 The AKG C 518 ML is the ultimate miniature condenser microphone for drums and percussion instruments. Its cardioid polar pattern rejects overspill from nearby instruments. A continuously adjustable vise-type clamp makes it easy to fix the microphone securely on the top hoop of most drums or percussion instruments. An external shock mount provides high mechanical-noise rejection. A special snap-on stabilizer knee will keep the gooseneck bent at a defined angle. The AKG C 518 ML features an integrated, switchable bass cut for adjusting the microphone's frequency response to your instrument's sound. C 518 ML is designed for use with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering (not included).Miniature cardioid condenser clamp-on microphone with shock mounted capsule Ideal for miking drums and percussions Including wireless direct adapter for easy use with AKG pocket transmitters Detachable microphone cable Integrated gooseneck Continuously adjustable vise type clamp The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters Includes the A 400 adapter, H 518 drum bracket, microphone bag, and the W 44 windscreen |
|
|
Akg C519ml Miniature Cardioid Condenser Microphone $189 The AKG C 519 ML clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo). Room to move for the wind section at last! Its tight cardioid polar pattern makes the C 519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful, and clear sound. The C 519 ML features an integrated, switchable bass cut for adjusting the microphone's frequency response to your instrument's sound. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters. The C 519 ML for use with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering (not included). Miniature condenser clip-on microphone for wind instruments, drums, and percussions Miniature gooseneck for accurate microphone alignment Including wireless direct adapter for easy use with AKG pocket transmitters Detachable microphone cable Transducer shock mount for high mechanical-noise rejection Includes A 400 adapter, Microphone bag, and W 44 windscreen |
|
|
Used Akg C519ml Miniature Cardioid Condenser Microphone $94.5 The AKG C 519 ML clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo). Room to move for the wind section at last! Its tight cardioid polar pattern makes the C 519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful, and clear sound. The C 519 ML features an integrated, switchable bass cut for adjusting the microphone's frequency response to your instrument's sound. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters. The C 519 ML for use with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering (not included). Miniature condenser clip-on microphone for wind instruments, drums, and percussions Miniature gooseneck for accurate microphone alignment Including wireless direct adapter for easy use with AKG pocket transmitters Detachable microphone cable Transducer shock mount for high mechanical-noise rejection Includes A 400 adapter, Microphone bag, and W 44 windscreen |
|
|
Applied Microphone Technology AMT VSW Clip-On Condenser Microphone for Sennheiser Systems $391 The AMT VSW - Sennheiser Clip-On Condenser Microphone System was designed to operate with Sennheiser wireless systems. The VS is a ultra miniature, feather weight low profile condenser microphone specially designed for the violin, viola, and mandolin. The microphone attaches to the violin, viola, and mandolin with a clamp designed for be solid on the instrument without harming or dampening the natural sound or vibrations. The VSW instrument microphone provides pure tonal reproduction without being unobtrusive. With the included AMT Interface, the microphone can plug directly into the interface which then plugs directly into Sennheiser wireless units. Requires phantom power. |
|
|
Applied Microphone Technology Amt Vsw Clip-On Condenser Microphone For Sennheiser Systems $391 The AMT VSW - Sennheiser Clip-On Condenser Microphone System was designed to operate with Sennheiser wireless systems. The VS is a ultra miniature, feather weight low profile condenser microphone specially designed for the violin, viola, and mandolin. The microphone attaches to the violin, viola, and mandolin with a clamp designed for be solid on the instrument without harming or dampening the natural sound or vibrations. The VSW instrument microphone provides pure tonal reproduction without being unobtrusive. With the included AMT Interface, the microphone can plug directly into the interface which then plugs directly into Sennheiser wireless units. Requires phantom power. |
|
|
Akg C518m Miniature Cardioid Condenser Microphone $249 The AKG C 518 M is the ultimate miniature condenser microphone for drums and percussion instruments. Its cardioid polar pattern rejects overspill from nearby instruments. A continuously adjustable vise-type clamp makes it easy to fix the microphone securely on the top hoop of most drums or percussion instruments. An external shock mount provides high mechanical-noise rejection. A special snap-on stabilizer knee will keep the gooseneck bent at a defined angle. The C 518 M features an integrated, switchable bass cut for adjusting the microphone's frequency response to your instrument's sound. The AKG C 518 M is designed for use with an external phantom powering.Miniature cardioid condenser clamp-on microphone with shock mounted capsule Ideal for miking drums and percussions Including wireless direct adapter for easy use with AKG pocket transmitters Detachable microphone cable Integrated gooseneck Continuously adjustable vise type clamp The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters Includes the A 400 adapter, H 518 drum bracket, microphone bag, and the W 44 windscreen |
|
|
Applied Microphone Technology VS Clip-On Condenser Microphone with Preamp - Regular $568 The AMT VS Microphone System includes the AMT VS Clip-On condenser microphone and the AMT belt pack preamp. The VS is a ultra miniature, feather weight low profile condenser microphone specially designed for the violin, viola, and mandolin. The microphone attaches to the violin, viola, and mandolin with a clamp designed for be solid on the instrument without harming or dampening the natural sound or vibrations. The microphone provides pure tonal reproduction while being unobtrusive. The reproduction of natural sound of the instrument is the goal. Includes a hardshell Blo-mold protective case and " to XLR cable.The AMT VS can be used with most major brand wireless belt pack transmitters and receivers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. Requires phantom power. |
|
|
Applied Microphone Technology Vs Clip On Condenser Microphone With Preamp - Regular $568 The AMT VS Microphone System includes the AMT VS Clip-On condenser microphone and the AMT belt pack preamp. The VS is a ultra miniature, feather weight low profile condenser microphone specially designed for the violin, viola, and mandolin. The microphone attaches to the violin, viola, and mandolin with a clamp designed for be solid on the instrument without harming or dampening the natural sound or vibrations. The microphone provides pure tonal reproduction while being unobtrusive. The reproduction of natural sound of the instrument is the goal. Includes a hardshell Blo-mold protective case and " to XLR cable.The AMT VS can be used with most major brand wireless belt pack transmitters and receivers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. Requires phantom power. |
|
|
Cad Gn10vp Miniature Gooseneck Condenser Microphone 10 $199 Designed primarily for speech and vocal pickup in boardrooms, Houses of Worship, or anywhere that a miniature gooseneck microphone is needed, the GN10VP features heavy-duty construction with a permanent rigid center pipe and a silent, durable, dual-flex pipe designed with strong positioning memory. Astatic's RF resistant architecture conforms to AES (Audio Engineering Society) article 48 standards, providing immunity from RF (Radio Frequency)-prone areas. Signals from cellphones, two-way text messaging devices, walkie-talkies, or other interference sources in today's wireless world are shielded from entering the microphone's signal pathWhat makes the GNVP truly unique is the ability to easily change the microphone's polar pattern. This means the installer can electronically decide which polar pattern is most suitable to use for the environment in which the microphone is placed. This can be achieved in minutes with a standard screwdriver. This pattern adjustment is indispensable in situations where the environment defeats the fixed polar pattern microphone. The GNVP also gives the installer the ability to maximize the mics gain before feedback. Once the ideal pattern is set, simply close the cover and replace the screws. Includes XLR-F type locking flange mount and windscreen.Continuously variable polar patternRF (radio frequency) resistant architectureStatus LED (defeatable)Controls secured within the XLR housing10" lengthQuick-mount formatBalanced transformerless output circuitryIntegrated hi-pass filter for elimination of unwanted low frequenciesSilent, durable, dual-flex pipe design with strong positioning memoryNon-reflective matte-black finishIncluded shock mount (approx. 20 dB noise isolation)Included XLR-F type locking flange mountIncluded windscreenConforms to RoHS (Restriction of hazardous substances) standards |
|
|
Cad Gn15vp Miniature Gooseneck Condenser Microphone 15 $199 Designed primarily for speech and vocal pickup in boardrooms, Houses of Worship, or anywhere that a miniature gooseneck microphone is needed, the GN15VP features heavy-duty construction with a permanent rigid center pipe and a silent, durable, dual-flex pipe designed with strong positioning memory. Astatic's RF resistant architecture conforms to AES (Audio Engineering Society) article 48 standards, providing immunity from RF (Radio Frequency)-prone areas. Signals from cellphones, two-way text messaging devices, walkie-talkies, or other interference sources in today's wireless world are shielded from entering the microphone's signal pathWhat makes the GNVP truly unique is the ability to easily change the microphone's polar pattern. This means the installer can electronically decide which polar pattern is most suitable to use for the environment in which the microphone is placed. This can be achieved in minutes with a standard screwdriver. This pattern adjustment is indispensable in situations where the environment defeats the fixed polar pattern microphone. The GNVP also gives the installer the ability to maximize the mics gain before feedback. Once the ideal pattern is set, simply close the cover and replace the screws. Includes XLR-F type locking flange mount and windscreen.Continuously variable polar patternRF (radio frequency) resistant architectureStatus LED (defeatable)Controls secured within the XLR housing15" lengthQuick-mount formatBalanced transformerless output circuitryIntegrated hi-pass filter for elimination of unwanted low frequenciesSilent, durable, dual-flex pipe design with strong positioning memoryNon-reflective matte-black finishIncluded shock mount (approx. 20 dB noise isolation)Included XLR-F type locking flange mountIncluded windscreenConforms to RoHS (Restriction of hazardous substances) standards |
|
|
Cad Gn20vp Miniature Gooseneck Condenser Microphone 20 $199 Designed primarily for speech and vocal pickup in boardrooms, Houses of Worship, or anywhere that a miniature gooseneck microphone is needed, the GN20VP features heavy-duty construction with a permanent rigid center pipe and a silent, durable, dual-flex pipe designed with strong positioning memory. Astatic's RF resistant architecture conforms to AES (Audio Engineering Society) article 48 standards, providing immunity from RF (Radio Frequency)-prone areas. Signals from cellphones, two-way text messaging devices, walkie-talkies, or other interference sources in today's wireless world are shielded from entering the microphone's signal pathWhat makes the GNVP truly unique is the ability to easily change the microphone's polar pattern. This means the installer can electronically decide which polar pattern is most suitable to use for the environment in which the microphone is placed. This can be achieved in minutes with a standard screwdriver. This pattern adjustment is indispensable in situations where the environment defeats the fixed polar pattern microphone. The GNVP also gives the installer the ability to maximize the mics gain before feedback. Once the ideal pattern is set, simply close the cover and replace the screws. Includes XLR-F type locking flange mount and windscreen.Continuously variable polar patternRF (radio frequency) resistant architectureStatus LED (defeatable)Controls secured within the XLR housing20" lengthQuick-mount formatBalanced transformerless output circuitryIntegrated hi-pass filter for elimination of unwanted low frequenciesSilent, durable, dual-flex pipe design with strong positioning memoryNon-reflective matte-black finishIncluded shock mount (approx. 20 dB noise isolation)Included XLR-F type locking flange mountIncluded windscreenConforms to RoHS (Restriction of hazardous substances) standards |
|
|
Used Audix Mb1250b Miniature Condenser Microphone 889406485686 $174.5 The Audix M1250B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The condenser mic is equipped with a cardioid capsule and is also available with hypercardioid, omni or shotgun capsules (sold separately), giving the microphone the unique ability to be used in a wide variety of live, studio, and broadcast applications.The Audix mic is available with a wide array of clips and accessories allowing it to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.Miniature Cardioid Condenser microphoneSmall, lightweight, low profileMiniatured integrated preampNo External power supply neededLow Noise, high SPLImmune to RF interferenceSupplied accessories:25' cable with mini-XLRf&Ndash;XLRm ConnectorsMic Stand adaptorHanging clipExternal Foam WindscreenCarrying pouchApplications:Overhead mic for choir, group vocalAcoustic instruments Ambient room miking Symphonic area miking Speech, presentation Cymbals, percussion |
|
|
Audix Adx10-Flp Miniature Electret Condenser Microphone For Flute $229 The ADX10-FLP Miniature Electret Condenser is a high-performance professional condenser with a mount custom designed for attaching to the head joint on a flute. With a smooth uniform response over a frequency range of 40-20kHz, it offers a warm, rich sound not typical of microphones this size.Designed for durability and simple installation, it is machined from solid brass and has Audix's E-coat finish for low-noise handling. The ADX10-FLP operates on phantom power of 9-52V with the included APS-911 phantom power adapter. It comes complete with flute mount and above-mentioned phantom power adapter.Miniature, high performance professional condenser microphoneMachined from solid brassAudix E-coat finishCustom-designed flute head joint mountSmooth uniform response from 40-20kHzCan be adapted to wireless systemOperates on phantom power of 9-52VAlso operates in battery mode with optional power supplyComes with flute mount and APS911 AA Battery/Phantom Power Adapter - with on/off switch and bass roll off |
|
|
Applied Microphone Technology AMT WSW Clip-On Double Microphone for Shure Systems $404.04 The AMT WSW - Shure is a special version of the AMT WS. The microphone element remains with the same high level of quality that the WS achieves however is specially adapted to work with any Shure belt pack transmitter/wireless system such as the ULXS14 or ULXP14. The WS comes wired directly with a 4 pin connector to connect directly to any Shure wireless belt pack. The WS is a low profile double condenser microphone that attaches to the clarinet, alto and bass flute, or oboe with a ultra-miniature low mass clamp. It is specifically designed for the timbre of the clarinet. The microphone provides pure tonal reproduction while being unobtrusive. It has an even reproduction of sound across the entire instrument. The AMT WS features a flexible gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive. The WSW features one microphone at the bell and second positioned over the keys to provide a truer reproduction for the musical instrument's tone quality. The AMT WSW mic also comes with two isolation rings. Both microphones are suspended in AMT's iso-ring technology which allows more gain before feedback and less handling noise. A low Z cable and case is included. Requires phantom power. |
 |
HDE (TM) Mini 3.5mm Voice Microphone for PC Laptop Skype List Price: $9.99 Sale Price: $0.42  |
|
This is an ultra-portable Mini Microphone. It uses a standard 3.5mm jack, and is Plug and Play: no software to install! It's an excellent addition to your laptop or notebook setup, & is suitable for internet telephony applications like VOIP or Skype... |
 |
Sennheiser MKE 400 Shotgun Microphone - Black List Price: $199.95 Sale Price: Too low to display Used From: $169.00 |
|
Rugged, compact and versatile, the compact Sennheiser MKE 400 shotgun microphone is a great choice for use with both handheld video camcorder and larger professional models. Designed for cameras with a lighting shoe mount and external microphone input, it offers natural, life like sound reproduction, and is durable enough to withstand heavy professional and home use... |
 |
Audio Technica ATR288W VHF Battery-Powered TwinMic Microphone System List Price: $250.00 Sale Price: $137.34 Used From: $187.50 |
|
Whether you're producing videos, leading aerobics, or putting on dramatic works, you'll find usefulness and versatility in Audio-Technica's 2-mic multi-purpose ATR288W wireless microphone system. At the heart of the system are its microphones, AT's ATR35s miniature lavalier condenser microphone and the ATR20 dynamic handheld microphone... |
 |
Midland 75-822 40 Channel CB-Way Radio List Price: $119.99 Sale Price: $74.99 Used From: $74.39 |
|
Having a CB radio while traveling can be an invaluable tool for emergencies and for keeping up on road conditions, and the Midland 75-820 40-channel handheld CB is one you should definitely consider. It comes with everything you need to get started in a hurry, including a battery pack for times you want to run the unit on six AA batteries and a cigarette lighter adapter for battery-free operation in your car... |
 |
Mini Microphone 3.5MM Jack Ultra Portable/plug-n-play List Price: $6.99 Sale Price: $1.99 |
|
Standard 3.5mm jack plugs directly into the microphone portPowerful but ultra pactPlug-and-playOmni-directionalPC and Mac patible |
 |
AKG C411L Ultra Light Instrument Mic W/Mini XLR Instrument Mic List Price: $189.00 Sale Price: $139.00 |
|
The C 411 condenser acoustic pickup with its tailored frequency response is ideal for acoustic guitar, mandolin, violin and most other stringed instruments. Placing the small ultra-light C 411 on or near the bridge will reproduce a clear and uncolored sound without changing the balance of the instrument... |
 |
Creative Labs Vado HD 8 GB Pocket Video Camcorder, 2nd Generation (Black Gloss with Maroon Accents) List Price: $199.99 Used From: $119.00 |
|
Catch the perfect snowboarding stunt, your baby's first steps or your kid's graduation, share it online and save it for a lifetime with Creative's Vado HD Pocket Video Cam. The thin, lightweight Vado HD is small enough to fit easily in a pocket, purse or the palm of your hand, and it captures video in 720P high-definition quality with just the touch of a button... |
 |
Creative Labs Vado HD 720p Pocket Video Camcorder with 8 GB Video Storage and 2x Digital Zoom (Black) OLD MODEL List Price: $229.99 Sale Price: $130.00 Used From: $59.00 |
|
Catch the perfect snowboarding stunt, your baby's first steps or your kid's graduation, share it online and save it for a lifetime with Creative's Vado HD Pocket Video Cam. The thin, lightweight Vado HD is small enough to fit easily in a pocket, purse or the palm of your hand, and it captures video in 720P high-definition quality with just the touch of a button... |
 |
Jabra Earwave Boom Cell Phone Headset-NEXTEL I50/I85/I90/I95 Built-In Miniature Microphone List Price: $61.69 Sale Price: $30.98 |
|
Contoured Earpiece that Fits Discreetly Behind Either Ear. Answer/End Button is Positioned on the Microphone Boom. 4' Cord Length. |
Chinese Hi-Fi Speaker System, The Latest Developments In The Market
High sensitivity and signal to noise ratio, low THD and sound level changes, and other enhanced audio technology parameters to enable hi-fi speaker system can accurately audio playback, making the Chinese mainland, Hong Kong and Taiwan manufacturers product development top priority. In the new products are running high output power and a broader range of decorative design.
Mainland China's hi-fi speaker system manufacturers are focusing on developing sensitivity of up to 89 dB, and THD (harmonic distortion) as low as 0.5% of the products, while enhancing the type of decorative design, and development of 5.1-channel speaker system is also a manufacturer R & D important subject.
Guangzhou ToneWinner Electronics Co. Ltd has been investing a TondyNo.2 of the hi-fi speakers, the sensitivity of 87dB, frequency response is 38Hz ~ 20KHz, Crossover Frequencies for 3KHz, impedance of 4 in Europe, the output power is 100W. Gui-Sound Electronics Industral Co. Ltd's products FR151B8-10L, the sensitivity is greater than 89dB.
From Hong Kong manufacturers of hi-fi speaker systems are usually a set of two speakers. Decorative design is considered to be low-end products to high-end products the difference between features. The new product has a high output power. PVC is the most popular cabinet finishes, while the PU because it has a smooth appearance become a popular choice. Appearance of an elegant piano coating layer, was considered to be the most expensive cabinet finishes.
Hi-fi speaker system is Megatone International Development Co.Ltd Hong Kong's most profitable product, each speaker's output power can reach 200W (rms). The company utilizes the most advanced piano coating technologies and processes, so that mid-range and high-end products to meet market demand. Its System-1 product, frequency response of 20 Hz ~ 23 KHz, sensitivity is 89dB, output power 150W (rms) or more. Each speaker system has a 6.5-inch bass unit and a 1-inch tweeter. Box material is 22mm of MDF, with a dark gray mahogany finishes.
Taiwan's commitment to product miniaturization of wireless technology and
Taiwan manufacturers to hi-fi speaker system, the provisions of the frequency response 32Hz ~ 18KHz, Sound level changes is less than 2dB. According to reports, hi-fi systems are usually used in home theater systems, PA systems, or some 2.1-channel speaker system. Develop a high power output products are the industry trends. The smaller product size, and the use of wireless technology into the majority of the company's research and development goals. According to the manufacturer description, wooden box speaker system products in the landslide, while the ABS box speaker system in the market is on the rise.
Hun Na International Co. Ltd's HN608B-11 is a hi-fi with a remote-controlled home theater speaker system. The company said the product easy with analog 5.1 channel output with a DVD player connection, or with 5.1-channel sound card, computer connections. This product's output power 80W. Its woofer, satellites and center speaker dimensions are 200 × 360 × 388 mm, 105 × 180 × 110mm..
YPL Audio of the T5 series of hi-fi speaker system uses NRSG (None Resonance Surround Geometry) technology and CBCS (Controlled Breakup Cone Structure) technology to improve sound quality. Products, output power 30W, sensitivity is 88dB. Products coated with a 1mm piano wooden box.
Many manufacturers active
Product R & D work
In order to maintain product with the latest technology and design to be updated, and many manufacturers consistently as part of their revenue into research and development into. For example, the Chinese mainland ToneWenner company, its total annual sales of 8% for research and development. R & D team using a computer, signal generators, oscilloscopes, distortion analyzers, DAAS, LMS, and other equipment, the development of new audio products and systems. UniChina year running 70 to 80 models of new products. Its R & D department 20 to 30 days to produce a new product (if the product design does not include amplifier). With amplifier products, lead-time for 30 ~ 40 days. Hong Kong's Megatone companies usually use imported raw materials and components for production, it produces about 40 hi-fi speaker systems, most of OEM designs.
Guangdong is the most important
Resource Supply Center
Guangdong is the hi-fi speaker system, the most critical resource center, where hundreds of manufacturers (including Taiwan, Hong Kong-based factories in the area of the companies). Abundant components and support industries (including the original speakers and key equipment manufacturers - such as SMT, mold processing and injection molding equipment providers), as well as adequate human resources to enable the Guangdong region an ideal resource supply center.
ToneWinner factory in Guangzhou and Chengdu have. The factory covers an area of 8000 square meters total, there are eight production lines, hi-fi speaker system on production capacity to 3 million. GGEC (Kuo Kuang Electric Company) is the largest manufacturers in Mainland China one of its industrial park in Guangzhou, covers an area of 1 square kilometer. The company has mold processing equipment and speaker production lines, as well as STM, injection molding, cone production, voice coil winding and wood processing factories. It is not only the production of finished products (such as hi-fi systems, etc.), but also produce a variety of speakers and components, car audio components and multimedia speakers and so on. The company can produce about 8 million units a month hi-fi speaker system, all the speakers are in line with RoHS requirements. Order to obtain higher profits, the company plans to develop more hi-fi speaker system. GGEC's hi-fi speaker systems are mostly exported to OEM and ODM customers. The company in audio entertainment for many major brands (JBL, Sony, Jamo, HP, Motorola, Logitech, Philips, Bosch, Toshiba, Kenwood, and Pioneer, etc.) to provide OEM services.
Gui-Sound is a Taiwan-based manufacturer of speaker systems. Dongguan, in Guangdong has 30,000 square meters factory. Its products include treble, bass and other speakers, voice coil and other related components. The company's total production of about 70% of the exports to the United States and Europe.
Another Taiwan-based company Unichina from operations in mainland China in 2001. All of its products are exported, primarily to OEM customers are the United Kingdom Pewer, Germany, Telefunken and the Crown in Japan and Taiwan. The United States is the most important export destination, accounting for 50% of exports, Taiwan accounted for 20%, while the remaining 30% are located in Japan, the United Kingdom and other markets.
Taiwan-based HunNa set up factories in Shenzhen was built in 1995, in addition to production 5.1-channel home theater system (sales account for about 20%), but also development of two-channel multimedia speakers, 2.1-channel ultra-low tone speaker system and headphones and so on. Europe is the company's largest export destination, accounting for 70% of sales, followed by North America, accounting for 10% of sales.
The company is committed to OEM and ODM business, OEM business accounts for about 40% of sales, while 60% was ODM's. The company's customers include Dell, Samsung, LG, Sanyo, NGS, and LC Group. Megatone Hong Kong-based factories in Shenzhen and Panyu in Guangzhou to prepare a new one is equivalent to three times the size of Shenzhen factory plant, after the completion of the company's monthly capacity will reach 5 million units. Megatone since 1995 to provide the performance of hi-fi speaker system, microphone and amplifier. It has some of the most important hi-fi speakers and home theater speaker brands (such as the Mainland of China CAV and BBK) to provide OEM services. It is the 60% of product sales to Mainland China, while 40% are exported to Europe and Australia.
About the Author
I am a professional editor from
Chinese Manufacturers
, and my work is to promote a free online trade platform.
http://www.chinaqualitycrafts.com/ contain a great deal of information about
rackmount server chassis
,
2u rack chassis
welcome to visit!