Stock Nyc

Stock Nyc

Check out this page if you are looking for Stock Nyc


Vic Firth Stock Pad


Vic Firth Stock Pad


$34.99


The Vic Firth Stock Pad has a wooden base that provides the support of a full-sized percussion pad without the added size and weight.

Hudson Music The Abercrombie/Erskine/Mintzer/Patitucci Band Live in NYC (DVD)


Hudson Music The Abercrombie/Erskine/Mintzer/Patitucci Band Live in NYC (DVD)


$13.49


The Abercrombie/Erskine/Mintzer/Patitucci Band is comprised of 4 of the most acclaimed musicians in contemporary music. On this DVD, the band performs a set of eight brilliant compositions filmed live in New York City - 2 by each member of the group. Interspersed among these phenomenal performances, each artist steps forward to discuss his own approach to playing his musical instrument and to playing in an ensemble. Running Time: 105 minutes.

Hudson Music The Abercrombie/Erskine/Mintzer/Patitucci Band Live In Nyc (Dvd)


Hudson Music The Abercrombie/Erskine/Mintzer/Patitucci Band Live In Nyc (Dvd)


$13.49


The Abercrombie/Erskine/Mintzer/Patitucci Band is comprised of 4 of the most acclaimed musicians in contemporary music. On this DVD, the band performs a set of eight brilliant compositions filmed live in New York City - 2 by each member of the group. Interspersed among these phenomenal performances, each artist steps forward to discuss his own approach to playing his musical instrument and to playing in an ensemble. Running Time: 105 minutes.Size: 7-1/2" x 5-1/4" ISBN: 063407346X

Vic Firth Heavy Hitter Laminates For Stock Pad And Slim Pad


Vic Firth Heavy Hitter Laminates For Stock Pad And Slim Pad


$9.99


Add Vic Firth Heavy Hitter Laminates to the Vic Firth Stock Pad or Slim Pad for great simulation of the response and feel of a marching drum. Vic Firth Heavy Hitter Laminates are heavy duty Mylar discs equipped with a special double-sided adhesive. Simply peel off the backing and apply to the Vic Firth Heavy Hitter pad of your choice. Because of the easy peel-and-stick feature, the Laminate can be added, replaced, or upgraded at any time.

Prs Private Stock Custom 24 Electric Guitar Aquamarine Burst


Prs Private Stock Custom 24 Electric Guitar Aquamarine Burst


$9999


The Paul Reed Smith Private Stock Department has been creating breathtaking instruments since 1996 and the Private Stock Custom 24 is no exception with a choice quilted maple top in an exciting aquamarine burst finish, a ribboned mahogany back, and an East Indian rosewood neck. The 24 fret rosewood fingerboard is dressed with PRS Modern Eagle II style birds made of mammoth ivory with paua outlines, and has a fast wide thin neck profile and a 25" scale. An adjustable fixed stoptail bridge brings out more of a mid-range woodiness in the tone. PRS 14:1 Phase II low mass locking tuners with ebony buttons are smooth, accurate, and extremely stable.The Private Stock Custom 24 has been loaded with outstanding aesthetic appointments such as a Private Reserve eagle inlay made of mammoth ivory with a paua outline, curly maple binding on body; gold hardware; ebony headstock underlay and truss rod cover; and a gorgeous high-gloss nitrocellulose lacquer finish.The PRS Private Stock Custom 24 is fitted with a 59/09 humbucking pick-up in the neck position and a 57/08 humbucking pickup in the bridge position that offer a wonderful array of both classic and modern tones. Controls include volume, tone, and a 5-way rotary pickup selector.Comes fully protected in a PRS deluxe hardshell caseBody: Model: Private Stock Custom 24Top: quilted mapleBack: ribboned mahogany Binding: curly maple Neck: Neck: East Indian rosewoodNeck shape: wide thinFret wire: custom medium jumboFingerboard: ebonyFingerboard inlays: Modern Eagle II style birds made of mammoth ivory with paua outlinesFingerboard side dots: mammoth ivoryHeadstock underlay: ebonyHeadstock inlays: Private Reserve eagle - mammoth ivory with paua outlineElectronics: Bass pick-up: PRS 59/09Treble pick-up: PRS 57/08Pickup covers: goldControls: vol, tone, and 5-way rotary pickup selector Hardware: Color: goldBridge: adjustable stoptailTuning pegs: PRS 14:1 Phase II low mass locking tunersTuner buttons: ebonyTruss rod cover: ebonyBackplates: mahogany Finish: Finish: high gloss nitrocellulose lacquerTop color: aquamarine burstBack color: antique naturalNeck color: naturalBinding: natural

Director's Showcase Elite 3 Rifles 36 Inch Stock Only


Director's Showcase Elite 3 Rifles 36 Inch Stock Only


$27.99


Many of the top Drum Corps, Winter Guard groups and competitive high school color guards use Director's Showcase rifles exclusively. This is because all Director's Showcase rifles have extraordinary strength, durability and precise balance. We achieve this by using only the highest quality poplar and aspen wood to make our rifles. These materials also allow us to get the smoothest finish when the rifles are painted. Our hand-dipped painting process assures us that each rifle will live up to our high quality standards. Our rifles are individually crafted with care and attention to detail, making them the best line of rifles on the market today.Dale R. Powers - Director EMERALD MARQUIS Color Guard"The Elite 4 is one of the strongest rifles we have used in our 19 years of existence. Because the bolt is slightly shorter than other rifles we have used, we found this rifle to be better balanced and not so butt-heavy. Same weight, just more evenly distributed."Bruno D. Zuccala - Color Guard Coordinator/Assistant Director, The CAVALIERS Drum & Bugle Corps: Rosemont, IL"In our 52nd season, the CAVALIERS Color Guard will continue to set new standards in the Drum Corps activity. The Elite 4 rifle, by design, will extend that aggressive/athletic style of our Color Guard."Sal Salas - WGI Laurel Award Recipient, Director - MADISON SCOUTS Drum and Bugle Corps"Champions never give up. They don't stop when the rehearsal ends, and their focus is unwavering. There are many characteristics of a champion: everything from their drive to succeed to the equipment they choose. Champions come in many forms. The Elite 4 rifle is the tool of a champion."

Director's Showcase Elite 4 Rifles 39 Inch Stock Only


Director's Showcase Elite 4 Rifles 39 Inch Stock Only


$29.99


Many of the top Drum Corps, Winter Guard groups, and competitive high school color guards use Director's Showcase rifles exclusively. This is because all Director's Showcase rifles have extraordinary strength, durability, and precise balance. They achieve this by using only the high-quality poplar and aspen wood to make their rifles. These materials also allow them to get the smoothest finish when the rifles are painted. A hand-dipped painting process assures that each rifle will live up to their high-quality standards. The rifles are individually crafted with care and attention to detail. The Elite Rifle will be a highly visible and well-balanced addition to any show.

Director's Showcase Elite 2 Rifles 39 Inch Stock Only


Director's Showcase Elite 2 Rifles 39 Inch Stock Only


$28.99


Designed with a rounded bottom for greater comfort and a wrap-around butt plate for better protection from breakage, the Elite 2 is the standard rifle of many high school programs.

Prs Private Stock- Dweezil Zappa Ltd Run # 9 Of 50 Electric Guitar


Prs Private Stock- Dweezil Zappa Ltd Run # 9 Of 50 Electric Guitar


$10999.99


Limited to a run of 50 guitars, the new Dweezil Zappa Private Stock semi-hollow model features a unique Custom 24 mandolin shape. The dramatically different shape of the mandolin inspired body with two f-holes is a departure from any guitar body shape PRS has ever created. Dweezil's personal model and the limited run of 50 are, however, unmistakably PRS. The ribboned mahogany body is topped with curly maple and given a Vintage Gold Burst finish of thin semi-gloss nitrocellulose lacquer. The Private Stock-grade curly maple neck with the Wide Fat neck shape lays the foundation for a Macassar ebony 24-fret fingerboard while the rowdy bass and treble clef inlay motif pays homage to the Zappa family legacy of eclectic playfulness. The matching maple veneer headstock is highlighted by a mother-of-pearl Private Stock eagle inlay. A pair of 57/08 humbucker pickups sport crème pickup mounting rings and a controlled by a master volume and tone with a 3-way toggle and out-of-phase switching. "It was really fun - and easy - to work with the team at PRS. I spoke with them a few times at various stages of the instrument. They were very helpful and knowledgeable. It's a great experience to build something from raw pieces of wood into the finished instrument. I never had the opportunity to do that before," said Dweezil. Mandolin-shaped Custom 24 semi-hollowbody with two f-holes One-piece curly maple top Ribboned mahogany back wood Vintage Gold Burst (thin semi-gloss nitro) 24 frets Private Stock-grade curly maple neck Macassar ebony fretboard Wide Fat neck shape Mother-of-pearl bass and treble clef fretboard Inlays Matching maple veneer headstock with mother-of-pearl Private Stock eagle inlay Ivoroid neck and headstock binding 57/08 bridge pickup 57/08 neck pickup Crème pickup mounting rings Master volume and tone controls with 3-way toggle and out-of-phase switching Nickel hardware Stoptail bridge Vintage-style Kluson tuners Schaller strap locks

Prs Private Stock Sc 245 Tm Semi Hollow Electric Guitar Fire Red


Prs Private Stock Sc 245 Tm Semi Hollow Electric Guitar Fire Red


$13999


The Paul Reed Smith Private Stock Department has been creating breathtaking instruments since 1996 and the Private Stock SC 245 TM Semi-Hollow electric guitar is another wonderful example of PRS craftsmanship. This beauty has a classic single-cutaway design with a choice curly maple top in an exciting fire red finish, a makore back, and a figured mahogany neck. Makore is a beautifully grained red-brown wood from West Africa with a deep natural luster. The 22-fret Brazilian rosewood fingerboard is dressed with PRS 513 style birds made of mother-of-pearl, and has a comfortable wide fat neck profile and a short 24.5" scale. The Private Stock SC 245 TM Semi-Hollow has been loaded with outstanding aesthetic appointments such as a modern eagle headstock inlay made of mother-of-pearl, curly maple binding; gold/nickel hardware; curly maple headstock underlay; Brazilian rosewood truss rod cover; classic F soundholes; and a lustrous high-gloss nitrocellulose lacquer finish.The PRS Private Stock Custom 24 is fitted with a 59/09 humbucking pick-up in the neck position and a 57/08 humbucking pickup in the bridge position that offer a wonderful array of both classic and modern tones. Controls include 2 Volume Controls and 2 Tone Controls with 3-way toggle pickup selector on the upper bout.Comes fully protected in a Private Reserve hardshell caseBody: Model: Private Stock SC TM 245 Semi HollowTop: curly mapleBack: makoreChambers: modernBackplates: makoreNeck: Neck: figured mahoganyNeck shape: wide fatFingerboard: Brazilian rosewoodFingerboard inlays: 513 mother-of-pearl birdsFingerboard side dots: mother-of-pearlHeadstock underlay: curly mapleHeadstock inlays: modern eagle mother-of-pearlElectronics: Bass pick-up: PRS 59/09Treble pick-up: PRS 57/08Pickup covers: gold/nickelControls: 2 Volume Controls, 2 Tone Controls, and 3-way toggle pickup Hardware: Color: gold/nickelBridge: 2-piece stoptailTuning pegs: vintage KlusonTruss rod cover: Brazilian rosewoodFinish: Finish: high gloss nitrocellulose lacquerTop color: fire redNeck color: naturalBinding: naturalOther: String gauges: .10 - .46Case: Private Stock leather

Used Prs Private Stock Santana Stoptail With 22 Frets Electric Guitar Solana Burst 886830217920


Used Prs Private Stock Santana Stoptail With 22 Frets Electric Guitar Solana Burst 886830217920


$10159.2


The Paul Reed Smith Private Stock Department has been creating breathtaking instruments since 1996 and the Private Stock Santana Stoptail is no exception with a choice quilted maple top in a sultry solana burst finish, a thick mahogany back, and a rosewood neck. The 22 fret rosewood fingerboard is dressed with PRS "old style" mother-of-pearl bird inlays with 14k gold outlines and has a Santana fat thin neck profile and a short 24.5" scale for supreme playing comfort. A two-piece, adjustable stop tail bridge brings out more of a mid-range woodiness in the tone. PRS 14:1 Phase II low mass locking tuners with rosewood buttons are smooth, accurate, and extremely stable.The Private Stock Santana stoptail has been generously loaded with outstanding aesthetic appointments such as a Private Reserve mother-of-pearl eagle inlay with 14k gold outline on headstock; curly maple binding on body, neck and headstock; gold/nickel hardware; Brazilian rosewood headstock underlay, truss rod cover and backplates; and a lustrous nitrocellulose lacquer finish.The PRS 59/09' pickups features exclusive wire produced on the original machine used to make the classic '50s era pickups. This humbucker is slightly darker and more powerful in the bridge with a touch more clarity and brightness in the neck. Controls include 2 volumes, 2 tones, and 3-way pickup selector toggle.Comes fully protected in a PRS deluxe hardshell case.Body:Model: Private Stock Santana Stoptail with 22 FretsTop: quilted mapleBack: thick mahogany Binding: curly maple on body, neck, and headstockNeck:Neck: East Indian rosewoodNeck shape: Santana wide fatFret wire: custom medium jumboFingerboard: Brazilian rosewoodFingerboard inlays: "old style" mother-of-pearl birds with 14k gold outlineFingerboard side dots: yellow/orange spineyHeadstock underlay: Brazilian rosewoodHeadstock inlay: Private Reserve mother-of-pearl eagle with 14k gold outlineElectronics:Bass pick-up: PRS 59/09Treble pick-up: PRS 59/09Wiring: 50's stylePickup covers: gold/nickelControls: 2 vol, 2 tone, and 3-way toggleHardware :Color: gold/nickelBridge: 2-piece stoptailTuning pegs: PRS 14:1 Phase II low mass locking tunersTuner buttons: Brazilian rosewoodTruss rod cover: Brazilian rosewoodBackplates: Brazilian rosewood Finish:Finish: high gloss nitrocellulose lacquerTop color: solana burstBack color: dark antique naturalNeck color: naturalBinding: natural

ToneShaper SW3D 3-Way Switch and Knobs for Telecaster with Bridge Single Coil and Neck Humbucker Stock Control


ToneShaper SW3D 3-Way Switch and Knobs for Telecaster with Bridge Single Coil and Neck Humbucker Stock Control


$109.99


The ToneShaper SW3D 3-Way Switch and Knobs for Telecaster with Bridge Single Coil and Neck Humbucker replaces your Tele's stock wiring, quickly and easily, without soldering. It provides increased flexibility that you cannot get with any other product. Cool switching options. Customizable tone controls. Built-in solutions for dealing with treble loss that happens when you turn down. Simple installation, simple operation, top-quality components.Optimized For Humbucker/Single-Coil CombinationsNote: This unit requires a 3-conductor or 4-conductor humbucker.Most players who add a humbucker to the bridge of their Tele use the stock 3-way switch (the ToneShaper supports this too, if desired).They've also considered the volume pot's value. Mixing humbuckers and single-coils always presents a dilemma: Do you use a 250k volume pot to accommodate the single-coils, or a 500k volume to accommodate the humbucker? The value of the pot has an effect on the tone, and most single-coils are voiced for 250k pots, while most humbuckers are voiced for 500k.With the ToneShaper, you don't have to compromise. When you order a Tele ToneShaper for hum/single combinations, you get a 500k volume pot to accommodate the humbucker, with a couple of resistors that are brought into the circuit in the other switch positions, lowering the load to 250k. So the full-humbucker setting (position 1) sounds like a humbucker should, and the single-coil and combination positions sound like they should.TELE® w/ NECK HUMBUCKER, 3-WAY SWITCH (SW3D)Switch Position Active pickups Volume Pot Hum-CancelingPosition 3 Neck Humbucker 500k YesPosition 2 Neck Humbucker + Bridge In Parallel 250k NoPosition 1 Bridge 250k NoThe ToneShaper unit is available in two basic configurations: conventional controls and reversed controls. Conventional controls are what you're used to seeing on your Tele, while reversed controls put the volume control at the front, the tone in the middle, and the switch at the back. Some people prefer this, as it provides more immediate access to the volume control.Top QualityThis unit features top-quality components such as USA-made, 4-layer circuit boards. The two outer layers are ground planes that shield the internal circuitry from Electromagnetic Interference and Radio Frequency Interference (EMI/RFI). This is the state-of-the-art. We went top-drawer, because we knew you'd want it to be quiet.The pots are CTS audio-taper with solid shafts, custom-made for this application. The switches used are Oak-Grigsby, just like Fender uses on their Custom Shop guitars. Two jacks are available: a Switchcraft model 11 that is the industry standard, or a Switchcraft L11, which has a slightly longer threaded bushing, so that you can get the proper washers on there and still have enough threads to get the nut on.Easy To Insta

ToneShaper SW5C 5-Way Switch and Knobs for Telecaster with Bridge Single Coil and Neck Humbucker Stock Control


ToneShaper SW5C 5-Way Switch and Knobs for Telecaster with Bridge Single Coil and Neck Humbucker Stock Control


$114.99


The ToneShaper SW5C 5-Way Switch and Knobs for Telecaster with Bridge Single Coil and Neck Humbucker replaces your Tele's stock wiring, quickly and easily, without soldering. It provides increased flexibility that you cannot get with any other product. Cool switching options. Customizable tone controls. Built-in solutions for dealing with treble loss that happens when you turn down. Simple installation, simple operation, top-quality components. Optimized For Humbucker/Single-Coil Combinations Note: This unit requires a 3-conductor or 4-conductor humbucker. Most players who add a humbucker to the bridge of their Tele use the stock 3-way switch (the ToneShaper supports this too, if desired). But ToneShaper think most players would like to be able to split the humbucker. The 5-way switch that's packaged with this unit will give you both humbucker and single-coil tones from your humbucker. They've also considered the volume pot's value. Mixing humbuckers and single-coils always presents a dilemma: Do you use a 250k volume pot to accommodate the single-coils, or a 500k volume to accommodate the humbucker? The value of the pot has an effect on the tone, and most single-coils are voiced for 250k pots, while most humbuckers are voiced for 500k. With the ToneShaper, you don't have to compromise. When you order a Tele ToneShaper for hum/single combinations, you get a 500k volume pot to accommodate the humbucker, with a couple of resistors that are brought into the circuit in the other switch positions, lowering the load to 250k. So the full-humbucker setting (position 1) sounds like a humbucker should, and the single-coil and combination positions sound like they should. TELE® w/ NECK HUMBUCKER, 5-WAY SWITCH (SW5C) Switch Position Active pickups Volume Pot Hum-Canceling Position 5 Neck Humbucker 500k Yes Position 4 Neck Single-Coil 250k No Position 3 Neck Humbucker + Bridge In Parallel 250k No Position 2 Neck Single-Coil + Bridge In Parallel 250k Yes (assumes compatible pickups) Position 1 Bridge 250k No The ToneShaper unit is available in two basic configurations: conventional controls and reversed controls. Conventional controls are what you're used to seeing on your Tele, while reversed controls put the volume control at the front, the tone in the middle, and the switch at the back. Some people prefer this, as it provides more immediate access to the volume control. Top Quality This unit features top-quality components such as USA-made, 4-layer circuit boards. The two outer layers are ground planes that shield the internal circuitry from Electromagnetic Interference and Radio Frequency Interference (EMI/RFI). This is the state-of-the-art. We went top-drawer, because we knew you'd want it to be quiet. The pots are CTS audio-taper with solid shafts, custom-made for this application. Th

ToneShaper SW5E 5-Way Switch and Knobs for Telecaster with Bridge Humbucker and Neck Single Coil Stock Control


ToneShaper SW5E 5-Way Switch and Knobs for Telecaster with Bridge Humbucker and Neck Single Coil Stock Control


$114.99


The ToneShaper SW5E 5-Way Switch and Knobs for Telecaster with Bridge Humbucker and Neck Single Coil replaces your Tele's stock wiring, quickly and easily, without soldering. It provides increased flexibility that you cannot get with any other product. Cool switching options. Customizable tone controls. Built-in solutions for dealing with treble loss that happens when you turn down. Simple installation, simple operation, top-quality components.Optimized For Humbucker/Single-Coil CombinationsNote: This unit requires a 3-conductor or 4-conductor humbucker.Most players who add a humbucker to the bridge of their Tele use the stock 3-way switch (the ToneShaper supports this too, if desired). But ToneShaper think most players would like to be able to split the humbucker. The 5-way switch that's packaged with this unit will give you both humbucker and single-coil tones from your humbucker.They've also considered the volume pot's value. Mixing humbuckers and single-coils always presents a dilemma: Do you use a 250k volume pot to accommodate the single-coils, or a 500k volume to accommodate the humbucker? The value of the pot has an effect on the tone, and most single-coils are voiced for 250k pots, while most humbuckers are voiced for 500k.With the ToneShaper, you don't have to compromise. When you order a Tele ToneShaper for hum/single combinations, you get a 500k volume pot to accommodate the humbucker, with a couple of resistors that are brought into the circuit in the other switch positions, lowering the load to 250k. So the full-humbucker setting (position 1) sounds like a humbucker should, and the single-coil and combination positions sound like they should.TELE® w/ BRIDGE HUMBUCKER, 5-WAY SWITCH (SW5E)Switch Position Active pickups Volume Pot Hum-CancelingPosition 5 Neck 250kPosition 4 Bridge Single-Coil + Neck In Parallel 250kPosition 3 Bridge Humbucker + Neck In Parallel 250kPosition 2 Bridge Single-Coil 250kPosition 1 Bridge Humbucker 500kThe ToneShaper unit is available in two basic configurations: conventional controls and reversed controls. Conventional controls are what you're used to seeing on your Tele, while reversed controls put the volume control at the front, the tone in the middle, and the switch at the back. Some people prefer this, as it provides more immediate access to the volume control.Top QualityThis unit features top-quality components such as USA-made, 4-layer circuit boards. The two outer layers are ground planes that shield the internal circuitry from Electromagnetic Interference and Radio Frequency Interference (EMI/RFI). This is the state-of-the-art. We went top-drawer, because we knew you'd want it to be quiet.The pots are CTS audio-taper with solid shafts, custom-made for this application. The switches used are Oak-Grigsby, just like Fender uses on their Custom

Toneshaper Sw5c 5-Way Switch And Knobs For Telecaster With Bridge Single Coil And Neck Humbucker Stock Control


Toneshaper Sw5c 5-Way Switch And Knobs For Telecaster With Bridge Single Coil And Neck Humbucker Stock Control


$114.99


The ToneShaper SW5C 5-Way Switch and Knobs for Telecaster with Bridge Single Coil and Neck Humbucker replaces your Tele's stock wiring, quickly and easily, without soldering. It provides increased flexibility that you cannot get with any other product. Cool switching options. Customizable tone controls. Built-in solutions for dealing with treble loss that happens when you turn down. Simple installation, simple operation, top-quality components. Optimized For Humbucker/Single-Coil Combinations Note: This unit requires a 3-conductor or 4-conductor humbucker. Most players who add a humbucker to the bridge of their Tele use the stock 3-way switch (the ToneShaper supports this too, if desired). But ToneShaper think most players would like to be able to split the humbucker. The 5-way switch that's packaged with this unit will give you both humbucker and single-coil tones from your humbucker. They've also considered the volume pot's value. Mixing humbuckers and single-coils always presents a dilemma: Do you use a 250k volume pot to accommodate the single-coils, or a 500k volume to accommodate the humbucker? The value of the pot has an effect on the tone, and most single-coils are voiced for 250k pots, while most humbuckers are voiced for 500k. With the ToneShaper, you don't have to compromise. When you order a Tele ToneShaper for hum/single combinations, you get a 500k volume pot to accommodate the humbucker, with a couple of resistors that are brought into the circuit in the other switch positions, lowering the load to 250k. So the full-humbucker setting (position 1) sounds like a humbucker should, and the single-coil and combination positions sound like they should. TELE w/ NECK HUMBUCKER, 5-WAY SWITCH (SW5C) Switch Position Active pickups Volume Pot Hum-Canceling Position 5 Neck Humbucker 500k Yes Position 4 Neck Single-Coil 250k No Position 3 Neck Humbucker + Bridge In Parallel 250k No Position 2 Neck Single-Coil + Bridge In Parallel 250k Yes (assumes compatible pickups) Position 1 Bridge 250k No The ToneShaper unit is available in two basic configurations: conventional controls and reversed controls. Conventional controls are what you're used to seeing on your Tele, while reversed controls put the volume control at the front, the tone in the middle, and the switch at the back. Some people prefer this, as it provides more immediate access to the volume control. Top Quality This unit features top-quality components such as USA-made, 4-layer circuit boards. The two outer layers are ground planes that shield the internal circuitry from Electromagnetic Interference and Radio Frequency Interference (EMI/RFI). This is the state-of-the-art. We went top-drawer, because we knew you'd want it to be quiet. The pots are CTS audio-taper with solid shafts, custom-made for this application. The switches used are Oak-Grigsby, just like Fender uses on their Custom Shop guitars. Two jacks are available: a Switchcraft model 11 that is the industry standard, or

Toneshaper Sw5e 5-Way Switch And Knobs For Telecaster With Bridge Humbucker And Neck Single Coil Stock Control


Toneshaper Sw5e 5-Way Switch And Knobs For Telecaster With Bridge Humbucker And Neck Single Coil Stock Control


$114.99


The ToneShaper SW5E 5-Way Switch and Knobs for Telecaster with Bridge Humbucker and Neck Single Coil replaces your Tele's stock wiring, quickly and easily, without soldering. It provides increased flexibility that you cannot get with any other product. Cool switching options. Customizable tone controls. Built-in solutions for dealing with treble loss that happens when you turn down. Simple installation, simple operation, top-quality components.Optimized For Humbucker/Single-Coil CombinationsNote: This unit requires a 3-conductor or 4-conductor humbucker.Most players who add a humbucker to the bridge of their Tele use the stock 3-way switch (the ToneShaper supports this too, if desired). But ToneShaper think most players would like to be able to split the humbucker. The 5-way switch that's packaged with this unit will give you both humbucker and single-coil tones from your humbucker.They've also considered the volume pot's value. Mixing humbuckers and single-coils always presents a dilemma: Do you use a 250k volume pot to accommodate the single-coils, or a 500k volume to accommodate the humbucker? The value of the pot has an effect on the tone, and most single-coils are voiced for 250k pots, while most humbuckers are voiced for 500k.With the ToneShaper, you don't have to compromise. When you order a Tele ToneShaper for hum/single combinations, you get a 500k volume pot to accommodate the humbucker, with a couple of resistors that are brought into the circuit in the other switch positions, lowering the load to 250k. So the full-humbucker setting (position 1) sounds like a humbucker should, and the single-coil and combination positions sound like they should.TELE w/ BRIDGE HUMBUCKER, 5-WAY SWITCH (SW5E)Switch Position Active pickups Volume Pot Hum-CancelingPosition 5 Neck 250kPosition 4 Bridge Single-Coil + Neck In Parallel 250kPosition 3 Bridge Humbucker + Neck In Parallel 250kPosition 2 Bridge Single-Coil 250kPosition 1 Bridge Humbucker 500kThe ToneShaper unit is available in two basic configurations: conventional controls and reversed controls. Conventional controls are what you're used to seeing on your Tele, while reversed controls put the volume control at the front, the tone in the middle, and the switch at the back. Some people prefer this, as it provides more immediate access to the volume control.Top QualityThis unit features top-quality components such as USA-made, 4-layer circuit boards. The two outer layers are ground planes that shield the internal circuitry from Electromagnetic Interference and Radio Frequency Interference (EMI/RFI). This is the state-of-the-art. We went top-drawer, because we knew you'd want it to be quiet.The pots are CTS audio-taper with solid shafts, custom-made for this application. The switches used are Oak-Grigsby, just like Fender uses on their Custom Shop guitars. Two jacks are available: a Switchcraft model 11 that is the industry standard, or a Switchcraft L11, which has a slightly longer threaded bushing,

Toneshaper Sw3d 3-Way Switch And Knobs For Telecaster With Bridge Single Coil And Neck Humbucker Stock Control


Toneshaper Sw3d 3-Way Switch And Knobs For Telecaster With Bridge Single Coil And Neck Humbucker Stock Control


$109.99


The ToneShaper SW3D 3-Way Switch and Knobs for Telecaster with Bridge Single Coil and Neck Humbucker replaces your Tele's stock wiring, quickly and easily, without soldering. It provides increased flexibility that you cannot get with any other product. Cool switching options. Customizable tone controls. Built-in solutions for dealing with treble loss that happens when you turn down. Simple installation, simple operation, top-quality components.Optimized For Humbucker/Single-Coil CombinationsNote: This unit requires a 3-conductor or 4-conductor humbucker.Most players who add a humbucker to the bridge of their Tele use the stock 3-way switch (the ToneShaper supports this too, if desired).They've also considered the volume pot's value. Mixing humbuckers and single-coils always presents a dilemma: Do you use a 250k volume pot to accommodate the single-coils, or a 500k volume to accommodate the humbucker? The value of the pot has an effect on the tone, and most single-coils are voiced for 250k pots, while most humbuckers are voiced for 500k.With the ToneShaper, you don't have to compromise. When you order a Tele ToneShaper for hum/single combinations, you get a 500k volume pot to accommodate the humbucker, with a couple of resistors that are brought into the circuit in the other switch positions, lowering the load to 250k. So the full-humbucker setting (position 1) sounds like a humbucker should, and the single-coil and combination positions sound like they should.TELE w/ NECK HUMBUCKER, 3-WAY SWITCH (SW3D)Switch Position Active pickups Volume Pot Hum-CancelingPosition 3 Neck Humbucker 500k YesPosition 2 Neck Humbucker + Bridge In Parallel 250k NoPosition 1 Bridge 250k NoThe ToneShaper unit is available in two basic configurations: conventional controls and reversed controls. Conventional controls are what you're used to seeing on your Tele, while reversed controls put the volume control at the front, the tone in the middle, and the switch at the back. Some people prefer this, as it provides more immediate access to the volume control.Top QualityThis unit features top-quality components such as USA-made, 4-layer circuit boards. The two outer layers are ground planes that shield the internal circuitry from Electromagnetic Interference and Radio Frequency Interference (EMI/RFI). This is the state-of-the-art. We went top-drawer, because we knew you'd want it to be quiet.The pots are CTS audio-taper with solid shafts, custom-made for this application. The switches used are Oak-Grigsby, just like Fender uses on their Custom Shop guitars. Two jacks are available: a Switchcraft model 11 that is the industry standard, or a Switchcraft L11, which has a slightly longer threaded bushing, so that you can get the proper washers on there and still have enough threads to get the nut on.Easy To InstallMount the ToneShaper and switch to your standard Fender control plate (fits Callaham and Gotoh plates too, as well as most other brands). Your pickup leads and assorted

Beyerdynamic M160 M 160 Hypercardioid Ribbon Mic IN STOCK NYC PROAUDIOSTAR
Beyerdynamic M160 M 160 Hypercardioid Ribbon Mic IN STOCK NYC PROAUDIOSTAR
$559.00
Time Remaining: 19d 4h 47m
Buy It Now for only: $559.00

Beyerdynamic M160 M 160 Hypercardioid Ribbon Mic IN STOCK NYC PROAUDIOSTAR
Beyerdynamic M160 M 160 Hypercardioid Ribbon Mic IN STOCK NYC PROAUDIOSTAR
$699.00
Time Remaining: 27d 11h 49m
Buy It Now for only: $699.00

Audix d2 D 2 FREE SHIP In stock Warranty Ships from NYC
Audix d2 D 2 FREE SHIP In stock Warranty Ships from NYC
$129.00
Time Remaining: 20d 11h 15m
Buy It Now for only: $129.00

Shure SM81 SM81LC Great Hihat mic IN STOCK NYC
Shure SM81 SM81LC Great Hihat mic IN STOCK NYC
$349.00
Time Remaining: 25d 12h 23m
Buy It Now for only: $349.00

*************************************************************

If you didn"t find what you wanted look below for Stock Nyc in the Amazon Marketplace.

*************************************************************

Fujifilm 1014258 Superia X-TRA 400 35mm Film -4 Pack Fujifilm 1014258 Superia X-TRA 400 35mm Film -4 Pack
List Price: $12.99
Sale Price: $3.99

This package includes four rolls of Fuji 35mm Superia X-TRA 400 ASA color print film with 24 exposures per roll. The X-TRA 400 speed delivers excellent results when shooting action subjects or shooting in low light conditions...

Apple iPod nano 16 GB Green (6th Generation) NEWEST MODEL Apple iPod nano 16 GB Green (6th Generation) NEWEST MODEL
List Price: $149.00
Sale Price: $139.99
Used From: $111.12

Redesigned for music and Multi-Touch, iPod nano is smaller and lighter than ever. You can clip it to your sleeve, jacket, or running shorts and keep your favorite songs at your fingertips--along with the Genius feature, a built-in FM radio, pedometer, and more...

Polk Audio DB651 6.5-Inch Coaxial Speakers Polk Audio DB651 6.5-Inch Coaxial Speakers
List Price: $119.95
Sale Price: $55.27

Turn up your vehicle's audio performance with the db651, a 6-1/2-inch coax speaker designed to drop into a variety of applications in no time at all. Advanced materials reduce component weight while offering rock solid reliability, advanced looks and ultra high performance...

Motorola OEM Droid X/MB810 Extended Battery BH6X Motorola OEM Droid X/MB810 Extended Battery BH6X
List Price: $59.99
Sale Price: $9.99
Used From: $31.88

This OEM Motorola BH6X Extended Battery SNN5880 SNN5880A Extended OEM Lithium-Ion Cell Phone Battery (1880 mAh) is for you to keep as an extra power source for your cell phone device. Keep an extra battery for your cell phone handy at home, in the office or on your travel...

Nikon D5100 16.2MP CMOS Digital SLR Camera with 3-Inch Vari-Angle LCD Monitor (Body Only) Nikon D5100 16.2MP CMOS Digital SLR Camera with 3-Inch Vari-Angle LCD Monitor (Body Only)
List Price: $749.00
Sale Price: $596.95
Used From: $478.95

Wacom Intuos3 Grip Tablet Pen ( ZP501E ) Wacom Intuos3 Grip Tablet Pen ( ZP501E )
List Price: $76.95
Sale Price: Too low to display

Wacom Intuos3 Grip Tablet Pen ( ZP501E ) has a waisted rubberised grip area - A longer grip area as well as optimum weight and balance reduces gripping power significantly up to 40%. Sensitive pen tip - With 1024 pressure levels, the Intuos3 Grip Pen tip responds in the most sensitive way...

Acer Iconia TAB A100-07U08U 7-Inch Tablet (8GB) Acer Iconia TAB A100-07U08U 7-Inch Tablet (8GB)
List Price: $329.99
Sale Price: $229.99
Used From: $169.99

Experience the freedom to play games, watch HD movies, social network and more on your Acer Iconia Tab— now in pocket-size! The small handheld design of the A100 with stunning 7” display makes this Tablet the perfect size to take on the go, and conveniently fits in your jacket pocket or purse to help maintain your busy life! This multi-functional tablet is the perfect immersive gaming device, mini movie theater, portable photo album, endless book collection, personal planner, social network connection and more! Key Features 7” HD Multi-Touch Display: (1024 x 600) resolution, 16:10 aspect ratio NVIDIA® Tegra™ 2 Dual Core Mobile Processor 1GB DDR2 Memory NVIDIA® GeForce® GPU 8GB Internal Storage MicroSD memory card slot up to 32GB Dolby® Mobile Technology Dual Analog Microphone Dual Speaker 802...

Panasonic HDC-TM41H HD Camcorder with 16GB Internal Flash Memory Panasonic HDC-TM41H HD Camcorder with 16GB Internal Flash Memory
List Price: $379.00
Sale Price: Too low to display
Used From: $133.80

  16.8x Optical ZoomStill Picture Recording at 2.1 MegapixelsSoft Skin Mode16GB built-in memorySDXC/SDHC/SD Memory Card Recording 

Metra 70-1771 Radio Wiring Harness for Ford/Lincoln/Mazda 1998-Up into Car, 16 Pin Metra 70-1771 Radio Wiring Harness for Ford/Lincoln/Mazda 1998-Up into Car, 16 Pin
List Price: $8.95
Sale Price: $0.01
Used From: $0.01

Ford/Lincoln/Mazda 1998-Up into Car 16 pin. Allows installation of an aftermarket radio using the existing factory wiring and connectors. No cutting of factory wiring is needed.

SIRIUS SCC1 Connect Universal Tuner SIRIUS SCC1 Connect Universal Tuner
List Price: $49.99
Sale Price: Too low to display
Used From: $44.86

The SIRIUS SC-C1 Sirius Connect universal tuner lets you to receive SIRIUS Satellite Radio in your vehicle. Just add a Sirius Connect adapter (available soon) and you'll be able to control all of the tuner's functions from your factory or after market stereo...


*************************************************************

Stock Nyc

Famous Skyscrapers And Company Offices In Manhattan, Nyc

New York's iconic skyscrapers have stood as a monument to commercial success for more than 100 years, and continue to inspire businesses of all sizes in one of the world's biggest financial centres. Of New York's five boroughs, it's Manhattan that has emerged as the heart of the city's commerce, finance and culture, offering the single biggest office space market in the USA.

New York's biggest and most famous skyscrapers can be found in Midtown Manhattan. Their immense and striking scale is not simply a concession to practicality - allowing for a higher ratio of rentable office space for each area of land on Manhattan Island - as their eye-catching appearance is also important for defining the city's identity.

As the home of many major multinational corporations in the famous commercial zones of the Rockefeller Center, Broadway and Times Square, including the New York Stock Exchange and NASDAQ and organisations such as the United Nations, Manhattan is one of the wealthiest counties in the USA and can be considered an essential location for setting up company offices to stay ahead - however big your business.

As well as being ideal for corporate offices, Manhattan has much more to offer at the heart of New York's vibrant social life in the City That Never Sleeps. The number of museums, parks and other attractions make Manhattan an exciting and fashionable place to live or to visit, with some of the best transport systems in the world making it easier to get around for business trips and in day-to-day life.

Manhattan's proud history as a centre of success means that there is huge diversity along the city's skyline, from the oldest skyscrapers erected in the early twentieth century through to post-Depression landmarks such as the Empire State Building and innovative modern structures that contribute to Manhattan's diverse image even more. Whether setting up office in an Art Deco landmark or a functional contemporary office suite, businesses have a wide range of options when choosing office space in the city's business district.

With the recent financial crisis meaning that many rates for office space have fallen by almost a third since 2009, now is an ideal time to look into renting office space in NYC, whatever your business' requirements. From serviced executive suites on fashionable Third Avenue to shared office space, renting workstations and facilities on a monthly basis, establishing your company office in Midtown Manhattan just got more affordable.

About the Author

Paul Buchanan writes for a digital marketing agency. This article has been commissioned by a client of said agency. This article is not designed to promote, but should be considered professional content.