Pack Microphone Mic
Pack Microphone Mic
|
|
Applied Microphone Technology Amt Z1w Clip On Condenser Mic For Sennheiser Systems $391 Applied Microphone Technology's special version of the AMT Z1 flute microphone is designed to work with any Sennheiser transmitter/wireless system. The Z1W flute microphone comes wired directly with a 4-pin connector to connect directly to any Sennhieser wireless mic belt pack. The AMT Z1 is a hardwired single microphone made for flute. The Z1W is the perfect choice from soft to louder playing applications. It can be used for featured soloist to miking a section of flutes. The AMT Z1 single microphone gets the most gain before feedback. The system comes with the microphone, special low-mass clamp, and preamp. The preamp uses the chip technology which contours the microphone for the most natural reproduction of sound possible. Requires phantom power.AMT Z1W Microphone 4 pin connector for Sennheiser transmitters Soft carrying AMT pouch for microphone |
|
|
Applied Microphone Technology Amt Lsw Clip-On Mic For Shure Systems $394 The AMT LSW Clip On Condenser Microphone is the ultimate in a woodwind or brass microphone and designed for direct connection to Shure or Sabine belt pack wireless systems. The mic system is meant to clip onto a flanged bell instrument. (Saxophones and Brass). The AMT LSW - Shure Microphone System is meant to be used by the player that requires a multi-channel professional level wireless system. (AMT Recommends the Shure ULXS14 and the ULXP14 wireless units). The AMT LSW allows the player to easily convert their direct connecting wireless microphone to any AMT preamp version. With a change in a cable, you can convert your LS from a "W"ireless setup, to a "Belt pack", or the AMT "Studio" series. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. It is powered via the wireless beltpack. This LSW system comes with microphone, universal clamp, case, and AMT disconnecting cable technology to allow the microphone to be used as "W"ireless or "BP" models if needed. (Additional cables for a variety of setups sold separately. The AMT Interface is also sold separately to allow connections for many wireless mic systems). Requires phantom power.Clip-On Condenser Microphone for a woodwind or brass instrument"Off the bell" clamping systemConverts from an LS "W"ireless setup , to a "Belt pack" model, or the AMT Studio setupIncludes soft case and cables |
|
|
Applied Microphone Technology AMT LSW Clip-On Mic for Shure Systems $394 The AMT LSW Clip On Condenser Microphone is the ultimate in a woodwind or brass microphone and designed for direct connection to Shure or Sabine belt pack wireless systems. The mic system is meant to clip onto a flanged bell instrument. (Saxophones and Brass). The AMT LSW — Shure Microphone System is meant to be used by the player that requires a multi-channel professional level wireless system. (AMT Recommends the Shure ULXS14 and the ULXP14 wireless units). The AMT LSW allows the player to easily convert their direct connecting wireless microphone to any AMT preamp version. With a change in a cable, you can convert your LS from a "W"ireless setup, to a "Belt pack", or the AMT "Studio" series. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. It is powered via the wireless beltpack. This LSW system comes with microphone, universal clamp, case, and AMT disconnecting cable technology to allow the microphone to be used as "W"ireless or "BP" models if needed. (Additional cables for a variety of setups sold separately. The AMT Interface is also sold separately to allow connections for many wireless mic systems). Requires phantom power. |
|
|
CAD Pro-4 Drum Microphone Pack $99.99 The CAD Pro-4-Drum Mic Pack is designed to cover the miking needs of the touring drummer or percussionist with ease, excellence, and economy. The pack consists of one CAD KM 212 dynamic kick drum microphone, 2 CAD TM 211 tom mics, and one CAD SN 210 dynamic snare mic with a frequency response specifically tweaked for snare. The CAD TM 211 tom mics and CAD SN 210 snare mics include integral shockmount mic clips for optimal sound and easy mounting. |
|
|
Cad Premium 4-Piece Drum Microphone Pack $299 The CAD 4-Piece Drum Microphone Pack includes one KBM412, 3 TSM411 mics, and 3 DMC-1 mic clips.The KBM412 is a rugged kick mic with powerfully accurate low-end reproduction. The TSM411 neodymium dynamic microphone is an excellent and versatile percussion mic that excels for use with toms, snares, cymbals, and congas. The mic clips offer secure, easy mounting for your mics with effective isolation, adjustable height, and strain relief.One KBM412 rugged dynamic kick mic3 TSM411 neodymium dynamic mics3 DMC-1 mic clips |
|
|
Applied Microphone Technology Amt Ta2w Double Condenser Mic For Sennheiser Systems $465 The AMT TA2W - Sennheiser is a low profile double condenser microphone system designed to work with Sennheiser Wireless Systems. The first microphone attaches to the bell of the musical instrument, the top or over the keys microphone is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise. The second microphone is placed in front of the bell of the microphone. Both TA2W microphones are on goosenecks for optimal placement. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive. The AMT interface lets the artist use AMT microphones with most Sennheiser wireless transmitters. In most cases the interface will eliminate the beltpack that has come with your microphone system. The AMT Interface will replace the belt pack and can be fastened using velcro to the belt pack of whichever wireless system that you are using. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. Requires phantom power.Element: Condenser Polar Pattern: Cardioid Frequency: 50Hz - 18kHz Sensitivity: -65dB+ 4dB Impedance: 150 Ohms Phantom Power: 12 to 52 vDC, Self-powered battery Max input SPL: 120 dB Dimension: 3.5" Flex Arm Cable: 6' Weight (Mic only): 36 grams |
|
|
Cad 4-Piece Drum Microphone Pack $179.99 The CAD 4-Piece Drum Microphone Pack is a carefully selected complement of CAD mics that will accurately reproduce every part of your drum kit's dynamics. They include three TSM411 dynamic mics for snare and toms and a KBM412 large-diameter kick mic. Also included are three DSM-1 mic mounts and a custom road case for safe transport.3 TSM411 dynamic mics for snare and toms1 KBM412 large-diameter kick mic.3 DSM-1 mic mountsCustom road case for safe transport |
|
|
Cad Pro-4 Drum Microphone Pack $99.99 The CAD Pro-4-Drum Mic Pack is designed to cover the miking needs of the touring drummer or percussionist with ease, excellence, and economy. The pack consists of one CAD KM 212 dynamic kick drum microphone, 2 CAD TM 211 tom mics, and one CAD SN 210 dynamic snare mic with a frequency response specifically tweaked for snare. The CAD TM 211 tom mics and CAD SN 210 snare mics include integral shockmount mic clips for optimal sound and easy mounting.One KM 212 dynamic kick drum mic2 TM 211 tom mics with integral shockmount mic clipsOne SN 210 dynamic snare mic with integral shockmount mic clip |
|
|
CAD Premium 4-Piece Drum Microphone Pack $149.99 The CAD 4-Piece Drum Microphone Pack includes one KBM412, 3 TSM411 mics, and 3 DMC-1 mic clips.The KBM412 is a rugged kick mic with powerfully accurate low-end reproduction. The TSM411 neodymium dynamic microphone is an excellent and versatile percussion mic that excels for use with toms, snares, cymbals, and congas. The mic clips offer secure, easy mounting for your mics with effective isolation, adjustable height, and strain relief. |
|
|
Hercules Stands Pro Mic Stand Pack $149.99 Hercules Stands' Pro Mic Stand Pack is made up of 1 Hercules MS401B Tilt Base Microphone Stands plus 2Hercules MS531B EZ Clutch Mic Stands with Boom:1 Hercules MS401B Tilt Base Microphone Stand:The Hercules MS401B Tilt Base Microphone Stand features a Quik-N-EZ height adjustment grip which makes one-handed adjustments a breeze with an internal locking mechanism that prevents slipping. Simply grab the EZ grip and adjust the stand up or down. It also features a Quik-N-EZ adapter for instant attachment of the mic to the stand: just flip the lever down to attach and flip it up to remove. Works on 5/8" tubes and is rubber-lined for a secure grip. The tilting base with level legs gives you a fully adjustable stand angle and swiveling legs that fit around other stands, drums, and stage equipment.Two Hercules MS531B EZ Clutch Mic Stands with Booms:The Hercules MS531B EZ Clutch Mic Stand with Boom features 3 great design innovations that eliminate the usual problems associated with everyday mic stands. First, the Quik-N-EZ adapter requires a simple push of the lever up or down to quickly mount it to the mic stand. It can also be left attached to the mic clip for speedy setups. Second, the Quik-N-EZ boom with a retainer allows for instant attachment of the boom to the stand. Just flip the lever up to attach and down to remove. Third, pressing the lever on the EZ clutch releases the clutch, letting you slide the upper tube up or down. Made with a tripod base of durable, die-cast aluminum.One MS401B Tilt Base Microphone Stand:Quik-N-EZ adapter for instant microphone attachmentQuik-N-EZ height adjustment grip for one-handed adjustmentsTilting base with level legsSwivel legsHeight: 40.6"-66.1"Weight: 8 lb.Base radius: 14.6"Two Hercules MS531B EZ Clutch Mic Stands with Boom:Quik-N-EZ adapter for instant microphone attachmentQuik-N-EZ boom with retainer for instant attachmentQuik-N-EZ clutch for easy adjustmentsTripod base made of durable die-cast aluminumHeight adjustment from 41.1-66.1"Weight: 7 lb.Base radius: 13.4"Boom length: 30.7" |
|
|
Applied Microphone Technology Amt Ta2w Double Condenser Mic For Shure Systems $465 The AMT TA2W - Shure is a low profile double condenser microphone System designed to work with Shure Wireless Systems. The first microphone attaches to the bell of instrument, the top or over the keys microphone is suspended in a 4 point isolation ring reducing valve, key, click, and handling noise. The second microphone is placed in front of the bell of the microphone. Both microphones are on goosenecks for optimal placement. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.The AMT interface lets the artist use AMT microphones with most Shure wireless transmitters. In most cases the Interface will eliminate the beltpack that has come with your microphone system. The AMT Interface will replace the belt pack and can be fastened using velcro to the belt pack of whichever wireless system that you are using. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. Requires phantom power. |
|
|
CAD 4-Piece Drum Microphone Pack $179.99 The CAD 4-Piece Drum Microphone Pack is a carefully selected complement of CAD mics that will accurately reproduce every part of your drum kit's dynamics. They include three TSM411 dynamic mics for snare and toms and a KBM412 large-diameter kick mic. Also included are three DSM-1 mic mounts and a custom road case for safe transport. |
|
|
Applied Microphone Technology Amt Lsw Clip-On Mic For Sennheiser Systems $394 The AMT LSW - Sennheiser Microphone System is a special version of the AMT LS. It is meant to be used by the player that requires a multi-channel professional level wireless system. The microphone element remains the same with the same high level of quality that the LS achieves however is specially adapted to work in this Sennheiser configuration. The AMT system is meant to clip onto a flanged bell instrument. (Saxophones and Brass) and was designed for direct connection to Sennheiser belt pack wireless systems.The AMT LSW allows the brass instrument player to easily convert their direct connecting wireless microphone to any AMT preamp version. With a change in a cable, you can convert your LS from a "W"ireless setup, to a "Belt pack", or the AMT "Studio" series. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. It is powered via the wireless belt pack. This system comes with microphone, universal clamp, case, and AMT disconnecting cable technology to allow the microphone to be used as "W"ireless or "BP" models if needed. (Additional cables for a variety of setups sold separately. The AMT Interface is also sold separately to allow connections for many wireless systems). Requires phantom power.Clip-On Condenser Microphone for a woodwind or brass instrument"Off the bell" clamping systemConverts from an "Belt pack" model, to a LS "W"ireless setup or AMT Studio setupIncludes soft case and cables |
|
|
Used Applied Microphone Technology Amt Lsw Clip-On Mic For Sennheiser Systems $358.54 The AMT LSW - Sennheiser Microphone System is a special version of the AMT LS. It is meant to be used by the player that requires a multi-channel professional level wireless system. The microphone element remains the same with the same high level of quality that the LS achieves however is specially adapted to work in this Sennheiser configuration. The AMT system is meant to clip onto a flanged bell instrument. (Saxophones and Brass) and was designed for direct connection to Sennheiser belt pack wireless systems.The AMT LSW allows the brass instrument player to easily convert their direct connecting wireless microphone to any AMT preamp version. With a change in a cable, you can convert your LS from a "W"ireless setup, to a "Belt pack", or the AMT "Studio" series. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. It is powered via the wireless belt pack. This system comes with microphone, universal clamp, case, and AMT disconnecting cable technology to allow the microphone to be used as "W"ireless or "BP" models if needed. (Additional cables for a variety of setups sold separately. The AMT Interface is also sold separately to allow connections for many wireless systems). Requires phantom power.Clip-On Condenser Microphone for a woodwind or brass instrument"Off the bell" clamping systemConverts from an "Belt pack" model, to a LS "W"ireless setup or AMT Studio setupIncludes soft case and cables |
|
|
Nady SP-R3 Mic 6-Pack with Cables and Mic Bag $129.99 Money-saving pack includes 6 Nady SP-R3 mics, 6 - 20' cables, and a 6-space padded nylon bag with a zippered pouch for cable storage. See #277021 for Nady Starpower SP-R3 microphone details. |
 |
 CAD Microphones PRO 7 Drum mic pack 6 mics  US $89.99
|
 Sony ECM 44B Omnidirectional Lavalier Microphone Clip On Lapel Record Mic Case US $49.99
|
 MXL 990 991 RECORDING MICROPHONE PACKAGE WITH CASE US $70.00
|
 MXL 990 991 Studio Condenser Microphone KIT of 2 Mics Case No Reserve US $79.00
|
 1 4 Male TS Mono to XLR Female Connect Guitar to Speaker Recording Cable 2m611 US $2.88
|
 Home Studio Recording Techniques Tips great for Neumann KM 184 U87 TLM49 users US $10.99
|
 Home Recording Techniques Tips great for AKG D12 D112 Shure Beta 52 users US $10.99
|
 2pcs 1 4 Female Stereo TRS Inline Locking Jack Socket1084 m US $1.95
|
 NADY 1200 VHF Wireless Receiver w Belt Packs Owned Used by STEVE VAI US $.11
|
 New Desk Top Tripod Mic Stand and Spring Type Mic Clip US $8.95
|
 New Desk Top Tripod Mic Stand and SM58 Style Mic Clip US $8.95
|
 New Desk Top Tripod Mic Stand and Expandable Mic Clip US $9.95
|
 Shure Wireless UT4A system US $190.00
|
 New Shure PGX24 SM58 Handheld Wireless Microphone Mic SM 58 Free Cable US $349.99
|
 Astatic JT 30 C Harmonica Microphone w stand and original boxpaperwork US $195.95
|
 1 4 Male Mono TS to XLR Female Connect Guitar to Speaker Amplifier Cable 2m610 US $2.95
|
 1 4 Male Mono to XLR Female Connect Guitar to Speaker Pro Audio Cable 2m612 US $2.88
|
 1 4 Male Mono to 1 4 Microphone Guitar to Pedal Effect extension Cable 2m615 US $2.95
|
 XLR Male to XLR Female 3 pin Audio Microphone extension Speaker Cable 2m605 US $2.88
|
 1 4 Male Mono to 1 4 Gold Tip TS Microphone GUITAR TO AMPLIFIER Cable 2m616 US $2.88
|
 1 4 Male Mono to XLR Female Connect Guitar to Speaker Recording Cable 2m612 US $2.88
|
 XLR Male to Female 3 pin Microphone Extension Extender Speaker AMP Cable 2m607 US $2.78
|
 Right Angle 1 4 Male Mono to XLR Male Guitar Recording Speaker AMP Cable 2m613 US $2.98
|
 Dynamic Microphone w 2 adapters 9 Cord Phono PlugBlack New in Pack US $3.95
|
 New 1 4 Male Mono TS Gold Tip to XLR Female Jack Speaker Audio AMP Cable 2m609 US $2.88
|
 Ultralite headset microphone US $65.00
|
 Shure FP 32 3 ENG Field Mixer US $300.00
|
 Cetacea Sound Wireless Microphones Receivers Transmitters RETAIL $350 US $49.00
|
 Sennheiser E845 Dynamic Cable Professional Microphone US $.99
|
 AKG C 1000 S Condenser Microphone Excellent Sounds Amazing US $76.00
|
 Dual Wireless Headset Handheld VHF Microphone System US $154.95
|
 Wireless Headset Microphone System BONUS Lapel NEW 1 YR US $124.95
|
 Mason Wireless Headset Microphone VHF Bonus Clip On 1YR US $69.95
|
 Sennheiser Lavalier Microphone MKE 2 4 C US $350.00
|
 Audix Fusion 6 Pack Drum Microphones w 2 Cymbal Condenser Mics Hard Case US $150.00
|
 Shure PGX14 85 Lavalier Wireless System US $299.00
|
 NEW AKG C 100 S Condenser Microphone US $100.00
|
 Shure WL93 Omnidirectional Condenser Miniature Lavalier Microphone Black US $69.99
|
 Shure Body Pack Transmitter Model SLX1 US $102.00
|
 Nady DKW 1H Dynamic Wireless Professional Microphone US $9.95
|
 Audio Technica Unipak ATW T310 Transmitter FREQ 541 566 MHz Microphone US $170.00
|
 VINTAGE 1940s MACHINE AGE RCA ART DECO OLD HARP MICROPHONE RED MEATBALL LOGO US $89.00
|
 VINTAGE 1960s MODERNISTIC LAFAYETTE ART DECO MID CENTURY OLD CHROME MICROPHONE US $120.00
|
 VINTAGE 1940s SHURE MID CENTURY ART DECO MACHINE AGE OLD CB HAM RADIO MICROPHONE US $84.01
|
 VINTAGE SHURE STREAMLINED ART DECO MACHINE AGE MID CENTURY BULLET MICROPHONE US $100.00
|
 Vintage Electro Voice Dynamic Cardioid Micrphone Model 664 US $29.99
|
 VINTAGE 1940s OLD JET AGE TURNER ROCKET FIN RADIO MICROPHONE MID CENTURY US $35.00
|
 VINTAGE 1940s ART DECO RONETTE OLD MID CENTURY CB HAM RADIO MICROPHONE CHROME US $63.88
|
 Shure PG1288 PG185 Vocal Lavalier Combo Wireless System H7 US $500.00
|
 VINTAGE 1950s OLD JET AGE ROCKET FIN SPACE AGE MODERNISTIC RADIO MICROPHONE US $34.00
|
 |
6 Pack Microphone Cables Mic Cable Cord Lo-Z 20 ft XLR Griffin List Price: $179.94 Sale Price: $29.95  |
|
Highlighted here is a 6 pack of microphone XLR cables by Griffin TS series. Each XLR mic cable measures twenty (20) feet long and has a XLR male connector on one end and a XLR female connector on the other end... |
 |
GLS Audio Mic Clip - Heavy Duty Microphone Clips - "U" Style Mike Clip - Fits all standard size Mics - 10 PACK List Price: $29.99 Sale Price: $17.95 |
|
These Mic Clips are designed to fit all standard size microphones such as the Shure SM58, our GLS Audio ES-58, ES-58-S, ES-57, and all standard size mics. These Mic Clips retail at 9.95 per 10 pack. Most retail music stores and online stores sell them for about 9... |
 |
3 pack headphone with microphone for iphone 2g 3g 3gs 4g- (Generic, WHITE Color) List Price: $14.99 Sale Price: $0.01 Used From: $0.99 |
|
Experience the best earphones for Apple iPhone 3G and iPhone 3GS at this price range. Built-in microphone for handsfree conversations and answer and send button switches between music and phone. Fashionable and Stylish design, superior sound quality... |
 |
Musician's Gear Tripod Mic Stand with Fixed Boom 10-Pack Sale Price: $99.90 |
|
These stable, tough, and affordable tripod mic stands feature tubular legs and a thread adapter...... |
 |
Musician's Gear Tripod Mic Stand w/Fixed Boom Black 2-Pack Sale Price: $29.98 |
|
This 2-pack features MS-220 Tripod Microphone Stands that have thread adapters and tubular legs. From floor to top thread they can be adjusted from 35" to 61-7/8". The 30-1/4" boom is not adjustable..... |
 |
CAD GXL2200SP Studio Condenser Mic Recording Pack List Price: $249.00 Sale Price: Too low to display |
|
The GXL2200 is great for recording studio vocals, voice-overs, choirs, acoustic instrument, strings, piano, cymbals, or as an overhead microphone. The GXL1200 is best used for recording choirs, orchestras, acoustic instruments, guitar cabinets, strings, piano, cymbals, hi-hat and, also as an overhead microphone... |
 |
Bluecell 5 Pack Blue/Green/Yellow/Hot Pink/Orange Handheld Stage Microphone Windscreen Foam Cover + Bluecell Cable Tie Sale Price: $7.99 |
|
High Quality handheld stage microphone windscreens cover. Color: Blue/Green/Yellow/Hot Pink/Orange, Quantity: 5 for one order. 2.8" Height x 2.3" Width. |
 |
Sennheiser e835 Dynamic Vocal Microphone (3 Pack) List Price: $349.95 Sale Price: $228.94 |
|
BONUS 3 PACK! Get three microphones for the price of two! Pro microphone with optimized response for close vocal work. Powerful sound with a presence boost for improved projection. Cardiod pickup pattern resists feedback... |
 |
GLS Audio 25ft Mic Cable Patch Cords - XLR Male to XLR Female Black Microphone Cables - 25' Balanced Mike Snake Cord - 5 PACK List Price: $124.99 Sale Price: $54.00 |
|
5 PACK of Professional Series Noise Free Mic Cables. They have a thick, high quality, flexible rubber jacket. They are heavy duty Noise Free "True Balanced LO-Z" and have 3 pin XLR connectors on each end... |
1.8 TFT AD668-A Screen Watch MP4 Player PU Band 2GB
It’s a great innovation that packs the MP4 functions into wrist watch. Normal watch appearance, stylish body, high quality strap, and high resolution display, MP4 watch becomes a must have accessory for people on the go. Your favorite movies can be played perfectly on its 1.8inch TFT true color screen, a 2.5 ~ 3.5 earphone jack adaptor for easy connection to most mini-amplification systems or standard earphones, USB interface makes you connect baby to PC directly, 2GB internal memory enables you store hundreds of songs or movies. What are you waiting for?
windows mobile 6 smartphone Hurry up to get this unimaginable digital baby at GSDBUY.Features:• 1.8-inch 65k TFT true color LCD screen, high resolution 128 x 160 pixel image • High-quality AVI player • Patented design, ultra fashionable • Time and date showing function • Shock-resistant, static-resistant and water-resistant• Plastic case with PU band, stainless steel back & buckle• Compatible formats: MP3, WMA, WAV and ADPCM • Integrated microphone supporting ADPCM recording• Support MP4 (NXV) video, support JPEG format, and showing picture and lyric • High-quality MIC record and A-B repeat• The built-in battery in the watch can be charged either by USB or A/C transformer • Can be played over 9 hours for each time charging 1.5 hours• Automatically detected battery voltage and capacity Specification:• Internal Memory: 2GB • Standard USB port • Voice output power: 5mW + 5mW • Voice output frequency: 20Hz to 20kHz quad band phones
Features:• 1.8-inch 65k TFT true color LCD screen, high resolution 128 x 160 pixel image • High-quality AVI player • Patented design, ultra fashionable • Time and date showing function • Shock-resistant, static-resistant and water-resistant• Plastic case with PU band, stainless steel back & buckle• Compatible formats: MP3, WMA, WAV and ADPCM • Integrated microphone supporting ADPCM recording• Support MP4 (NXV) video, support JPEG format, and showing picture and lyric • High-quality MIC record and A-B repeat• The built-in battery in the watch can be charged either by USB or A/C transformer • Can be played over 9 hours for each time charging 1.5 hours• Automatically detected battery voltage and capacity
About the Author