Microphone Speaker
Microphone Speaker
|
|
Olympus Compact Shotgun Microphone $181.99 The Olympus ME-31 shot gun microphone's directional design limits interference from nearby sound sources. This is useful for recording a particular voice or signal that would otherwise be obscured or overpowered by other sources. For example, the ME-31 gun mic can help capture a keynote speaker at a conference without recording a lot of chatter from attendees. |
|
|
Randall Isolation 12 Speaker Cab $399.99 Essential whenever or wherever you're unable to crank full performance volume and tone. The concept is simple. A speaker is mounted in a completely closed, hinged cabinet with a microphone suspended inside. The cab has 1/4" in and outs, as well as a mic out to the mixing console. For recording, Isolation lets you record your amp full out, reflecting your true tone without waking the neighbors or inspiring visits from the cops. 12" Celestion Vintage 30 speaker. 18"W x 18"H x 31-1/2"D.Retractable handleCelestion Vintage 30 - 12" speaker10" gooseneck for mic supportMic not included, condenser mic recommended |
|
|
American Audio Xsp-15A Powered Speaker $399.99 The XSP-15A powered speaker boasts a 15", 2-way active loudspeaker and a 400W biamplifier system encased in a lightweight cabinet. It features a 1.75" compression driver, time-aligned crossover, XLR and RCA balanced inputs, a built-in mixer, and an ABS nylon fiber cabinet with handle and full grill.American Audio designed the XSP-15A speaker for use in both portable and permanently installed systems. The speaker includes a polemount slot and rubber feet on the bottom for portable applications. Rigging points on the top, bottom, and rear are provided and flight installations.15", 2-way powered speaker400W built-in, biamplifier systemNeodymium components1.75" compression driverTime-aligned electronic crossoverBuilt-in mixer with: 1 line input, 1 mic input, treble and bass Control, channel and master volumeBuilt-in RCA inputs1/4" XLR through outputXLR and RCA balanced inputsSeparate Microphone Volume ControlsABS nylon fiber cabinet with handleFlyable or stand-mountableFull grill |
|
|
American Audio Xsp-10A Powered Speaker $199.99 The XSP-10A powered speaker boasts a 10", 2-way active loudspeaker and a 200W biamplifier system encased in a lightweight cabinet. It features a 1" compression driver, time-aligned crossover, XLR and RCA balanced inputs, a built-in mixer, and an ABS nylon fiber cabinet with handle and full grille.American Audio designed the XSP-10A speaker for use in both portable and permanently installed systems. The speaker includes a polemount slot and rubber feet on the bottom for portable applications. Rigging points on the top, bottom, and rear are provided and flight installations.10-inch, 2-way powered speaker200W built-in, biamplifier system1" compression driverTime-aligned electronic crossoverBuilt-in mixer with: 1 line input, 1 mic input, treble and bass Control, channel and master volumeBuilt-in RCA inputs1/4" XLR through outputXLR and RCA balanced inputsSeparate Microphone Volume ControlsABS nylon fiber cabinet with handleFlyable or stand-mountableFull grille |
|
|
American Audio Xsp-12A Powered Speaker $299.99 The XSP-12A powered speaker boasts a 12", 2-way active loudspeaker and a 300W biamplifier system encased in a lightweight cabinet. It features a 1.75" compression driver, time-aligned crossover, XLR and RCA balanced inputs, a built-in mixer, and an ABS nylon fiber cabinet with handle and full grille.American Audio designed the XSP-12A speaker for use in both portable and permanently installed systems. The speaker includes a polemount slot and rubber feet on the bottom for portable applications. Rigging points on the top, bottom, and rear are provided and flight installations.12-inch, 2-way powered speaker300W built-in, biamplifier systemNeodymium components1.75" compression driverTime-aligned electronic crossoverBuilt-in mixer with: 1 line input, 1 mic input, treble and bass Control, channel and master volumeBuilt-in RCA inputs1/4" XLR through outputXLR and RCA balanced inputsSeparate Microphone Volume ControlsABS nylon fiber cabinet with handleFlyable or stand-mountableFull grill |
|
|
On-Stage Stands SSB-6500 Speaker Stand Bag $29.99 This padded speaker stand bag from On-Stage Stands provides ample room for either 2 speaker stands, 6 microphone stands or a load of drum hardware. The heavy duty speaker stand bag features an adjustable shoulder strap with metal clip for fast removal. Also includes hand straps for convenient handling. 2 heavy gauge metal pulls are attached to the zipper, so the stand bag can be zipped at the center or side. All seals are crafted with corded piping that gives the On-Stage Stands SSB-6500 Speaker Stand Bag its rigid shape. |
|
|
On-Stage Stands Ssb-6500 Speaker Stand Bag $24.95 This padded speaker stand bag from On-Stage Stands provides ample room for either 2 speaker stands, 6 microphone stands or a load of drum hardware. The heavy duty speaker stand bag features an adjustable shoulder strap with metal clip for fast removal. Also includes hand straps for convenient handling. 2 heavy gauge metal pulls are attached to the zipper, so the stand bag can be zipped at the center or side. All seals are crafted with corded piping that gives the On-Stage Stands SSB-6500 Speaker Stand Bag its rigid shape. |
|
|
Used Olympus Compact Shotgun Microphone $181.99 The Olympus ME-31 shot gun microphone's directional design limits interference from nearby sound sources. This is useful for recording a particular voice or signal that would otherwise be obscured or overpowered by other sources. For example, the ME-31 gun mic can help capture a keynote speaker at a conference without recording a lot of chatter from attendees.Limited interferenceDurable metal constructionDesktop microphone stand with a removable gripWindscreen is included to reduce wind noise |
|
|
Beyerdynamic Mm 1 Measurement Microphone $199 The Beyerdynamic MM 1 is a measurement microphone designed specifically for measuring sound reinforcement and PA systems. It is designed to work with spectrum analyzers for measuring frequency response and sound pressure levels of loud speaker systems. The MM 1 is the ideal microphone for the measurements of audio signals in the research, development, for reverberation testing and other applications.The MM 1 mic's narrow tubular construction ensures that the microphone has negligible influence on the sound field so that an increase in pressure level is avoided due to the linear frequency response.Requires phantom power.Linear frequency responseOmnidirectional polar patternCalibrated open circuit voltageNarrow tubular construction |
|
|
Audix F5 Instrument Microphone $79.99 The all-purpose Audix f5 Fusion Series dynamic instrument microphone is designed to mic a wide variety of musical instruments, including snare, toms, percussion, guitar and bass cabinets, brass, flute, and woodwinds, as well as vocals and speech. Assembled and tested by Audix in the USA, the f5 is an ideal mic for both stage and studio applications. With a wide frequency response of 55Hz-15kHz, the versatile Audix f5 mic provides clear, accurate, natural sound reproduction without having to rely on EQ. The f5 mic handles sound pressure levels in excess of 137dB without distortion, which lets you mic anything from guitar and bass cabinets to heavy brass with supreme confidence. Sturdy, compact, and easy to position, the f5's roadworthy construction includes a precision-cast zinc-alloy body, black finish, laser etched model number, steel mesh grill, gold XLR connector, and a tension-fit heavy-duty-nylon mic clip.Using in Audix f5:The f5 has a tight (hypercardioid) pick-up pattern in order to help eliminate sound from other instruments on stage from bleeding into the microphone. For this reason, it the f5 is exceptionally effective for drums and percussion in be able to capture the sound of each component of the kit. Snare:Start with the f5 about 2 inches above the head and aimed towards the center of the drum. For more "rim" effect, the f5 can be aimed less towards the center and more towards the rim. It is not uncommon for engineers to place the mic practically right on the drumhead to achieve a very tight, cracking sensation. Toms, congas:Similar to snare. For tighter sound and more attack place, the mic closer to the head. For more decay and overtones pull the mic further away from the head. Guitar cabs:The f5 can be placed within 1-2 inches of the grill cover at a 90 angle pointing directly into the speaker. If the mic is placed closer to the edge of the speaker, you will minimize the higher frequencies and get a warmer, fatter tone. To capture more highs, move the mic closer towards the center of the speaker, but avoid the middle of the speaker.Horns:Place the mic within 1 - 2 inches of the bell, especially when on a stage with drums, bass, guitar, etc. For jazz, classical, and music where the stage volume is lower, the mic can be placed further away for a richer, fuller, sound. Operation:The f5 is a low impedance microphone and should be plugged into a mic-level input on your console, mixer, or recording device. Please note that your microphone does not require phantom power and will not be effected in any way by phantom power should it be running simultaneously when the microphone is in operation. Avoid plugging or unplugging the microphone from the PA system unless the channel is muted or the volume of the system turned down. Failure to do so may result in a loud popping noise, which could seriously damage the speakers in the PA system. Hypercardioid pickup pattern for isolation and feedback controlLow-mass diaphragm for clear, natural, ac |
|
|
Peavey Msdi Microphone Simulated Direct Interface $149.99 The Peavey MSDI Microphone Simulated Direct Interface offers the ease and clarity of a direct signal to you console with the added bonus of sounding as though you miked the amp. The MSDI is a specially voiced direct interface used to connect guitar amplifiers to PA or recording mic inputs. A 1/4" jack is used to interface your amp's speaker output and speaker OR your amp's line out/send to the MSDI output. The MSDI features 100% passive circuitry, which means no clipping and no power supply required. Other features include speaker/load input, tone selector, output level control, and transformer-balanced XLR microphone simulated output with ground lift. DI with speaker simulationSpeaker/load input3-way tone selectorTransformer-balanced XLR output ground lift Output level controlPassive circuitry |
|
|
Phonic Sound Ambassador 75 Active Pa Speaker $299.99 The Phonic Sound Ambassador 75 is an active PA speaker with a built-in 4-channel mixer. The unit can be further customized to include 2 wireless UHF microphones. Other important features include XLR microphone inputs on channels 1 and 2, line input channels with 1/4" and XLR or RCA inputs, and all have individual volume controls.A link out connector with a 1/4" phone jack and XLR jack enables 2 Sound Ambassadors to be linked together to further enhance your set up. Additional speakers can also be added to share the power from the amplifier through the speaker out jack. Channels 1 through 3 are topped off with 2-band EQs, and the unit also features master volume control, a built-in limiter, and protection circuitry. The DC power inlet allows the Sound Ambassador 75 to be used in conjunction with portable battery packs, ensuring you're always able to use it - even when an AC power source is unavailable. All of these features combine to make the Sound Ambassador 75 PA speaker a must-have for touring bands, clubs, and karaoke.Active speaker with Wireless mic slots and compact MixerLuxury-molded cabinet that can be used as a floor monitor or mounted as a raised sound reinforcement speaker2 wireless microphone receiver slots for optional wireless microphonesFlexible, stackable configuration (can be mounted on tripod or with wall-mount kit)Operates on DC or AC powerLess weight by switching power supply4 input channels including 2 mic preamps and 4 line inputsBuilt-in mixer with independent Treble and Bass EQ for channels 1- 3Separate channel with stereo RCA inputs for CD or tape player2-way speaker with a 10" woofer and a 1" compression tweeter75-watt built-in power amplifierPeak indicator on master controlLink out and speaker out features allow connection to another active or passiveAmp-in feature allows external signal to use the built-in power amplifierProtection system including over-heat, speaker short circuit, limiting, and HF speaker driverAC source selected from 115VAC or 230VACCompatible with the Phonic S1 and S2 speaker mounts |
|
|
American Audio Dls-15P 15 2-Way Powered Speaker $279.99 The American Audio DLS-15P 15" 2-way Speaker has a die-cast 15" woofer with 3" voice coil and a high-frequency compression horn housed in a trapezoidal ABS cabinet with built-in 300W power amplifier. With 2 mic inputs (XLR and 1/4" stereo) with mic volume control, XLR and RCA line inputs, and controls for bass, treble, and volume, you can use the American Audio PA speaker as a self-contained sound system. The DLS-15P speakers can be flown, stand-mounted, or used on the floor as a monitor with included brackets.15" 2-way speakerDie-cast woofer with 3" voice coilCompression 1.75" HF driverABS nylon fiber cabinet Trapezoidal designBuilt-in 300W power amplifierXLR and RCA line inputs2 microphone inputs (XLR & 1/4" stereo) with separate microphone volume controlTreble, bass and volume output control Flyable and stand mountableFloor monitor brackets |
|
|
Yamaha Msr250 Active Powered Speaker $399.99 The MSR250 Yamaha speaker delivers the ideal blend of power, performance, features, and portability for an exceptionally wide range of applications. A redesigned class D amplifier delivers 250W of clean, dynamic power to a high-performance 10" cone woofer and 1" titanium-dome compression driver that match up perfectly for smooth, uncolored response from 55Hz to 20kHz. The woofer has an oversized 2.5" aluminum voice coila size you'd normally see on a 15" wooferthat contributes to outstanding sound and durability. With all this power and performance, the big surprise is how light and manageable this advanced powered speaker is.Versatile Dual-channel Input ConfigurationFor extra input flexibility the MSR250 features dual input channels, each with it's own low and high equalizer controls and level control. The signals from the 2 inputs are mixed and delivered via the MSR250 speakers as well as the rear-panel line out connector, allowing convenient linking to other speakers or audio devices for easy system expansion (the MSR250 is a perfect expansion speaker for Yamaha's STAGEPAS 250M compact sound system). Input 1 has balanced XLR and phone jack connectors that accept microphone or line input, and input 2/3 is actually a mixing input in its own right with phone jack and 2 pin jack connectors.Built for Heavy Duty UseAlthough it's lightweight and easy to handle, the MSR250 speaker is exceptionally durable and will take the most demanding tours in stride. It's also designed to be used in a variety of situations, including normal upright and wedge-style floor monitor operation. There's also a built-in polemount receptacle for convenient standmounting.Powered speakers offer many advantages over their passive counterparts, whether used on the road or in permanent installations. You don't need separate amplifiers or the extra cables and connections required, so setup is fast and easy while reliability is significantly improved. The ability to plug directly into the speaker inputs can eliminate an entire rack of amplifiers in a modest-size system. But the benefits go beyond mere convenience. Optimum matching of amplifiers and speakers involves much more than simple impedance figures, and can be a formidable engineering task given the vast number of choices available. The Yamaha MSR-series power amplifiers have been ideally mated to their respective speakers in every way possible, delivering reproduction quality that only the most stringent matching can achieve. There are also a significant number of Yamaha refinements that put these extraordinary powered speakers in a class of their own, including an original cabinet design that eliminates internal standing waves and ferrofluid- cooled voice coils for superior stability and linearity.The MSR250 powered speakers can be used alone or in combination with the MSR800W powered subwoofer (sold separately) to create sound reinforcement systems from modest to massive that will sound superb while delivering the power |
 |
 Oktava MK 012 Condenser Professional Microphone  US $150.00
|
 LOW PROFILE BOOM MICROPHONE STAND 5 FEET ADJUSTABLE HEIGHT MIKE CLIP TRIPOD NEW US $9.99
|
 1 4 Male TS Mono to XLR Female Connect Guitar to Speaker Recording Cable 2m611 US $2.88
|
 Kenwood KMC 21 Cable Professional Microphone US $35.00
|
 Shure SLX14 System w Countryman E6IOW5T2SL Headset Mic J3 Band 572 596 MHz US $679.00
|
 Sennheiser MD 421 MD421 U 5 Microphone Mic with Case and Clip US $250.00
|
 Emerson MM306 Special Effects DVD Karaoke Microphone US $8.00
|
 Blue Baby Bottle Mic with shock mount pop filter cherry box NEW In Box US $200.00
|
 2pcs 1 4 Female Stereo TRS Inline Locking Jack Socket1084 m US $1.95
|
 NADY 1200 VHF Wireless Receiver w Belt Packs Owned Used by STEVE VAI US $.11
|
 SoundTech STM41W Handheld wireless microphone for the AL1RW sound system NEW US $18.99
|
 1 4 Male Mono TS to XLR Female Connect Guitar to Speaker Amplifier Cable 2m610 US $2.95
|
 1 4 Male Mono to XLR Female Connect Guitar to Speaker Pro Audio Cable 2m612 US $2.88
|
 1 4 Male Mono to 1 4 Microphone Guitar to Pedal Effect extension Cable 2m615 US $2.95
|
 XLR Male to XLR Female 3 pin Audio Microphone extension Speaker Cable 2m605 US $2.88
|
 1 4 Male Mono to 1 4 Gold Tip TS Microphone GUITAR TO AMPLIFIER Cable 2m616 US $2.88
|
 1 4 Male Mono to XLR Female Connect Guitar to Speaker Recording Cable 2m612 US $2.88
|
 XLR Male to Female 3 pin Microphone Extension Extender Speaker AMP Cable 2m607 US $2.78
|
 Right Angle 1 4 Male Mono to XLR Male Guitar Recording Speaker AMP Cable 2m613 US $2.98
|
 Sony ECM 55B Condenser Cable Professional Microphone US $200.00
|
 3 Samson R21 Dynamic Cable Professional Microphones With Case US $35.00
|
 Cetacea Sound Wireless Microphones Receivers Transmitters RETAIL $350 US $49.00
|
 Dual Wireless Headset Handheld VHF Microphone System US $154.95
|
 Wireless Headset Microphone System BONUS Lapel NEW 1 YR US $124.95
|
 Mason Wireless Headset Microphone VHF Bonus Clip On 1YR US $69.95
|
 Dual Wireless Microphone System Handheld VHF AC Rec 1YR US $154.95
|
 Shure PG1288 PG185 Vocal Lavalier Combo Wireless System H7 US $500.00
|
 AKAI M 7 Terecorder Pair Microphones Plus More Accessories US $29.99
|
 Nady SP 4C Wired Vocal Microphone With Switch 20 Foot XLR Mic Cable SP4C US $18.95
|
 MXL MXL 990 Condenser Microphone with Shockmount US $59.99
|
 Lot of 2 Samson R31S Performer Dynamic Cable Microphone with Mic Clip US $9.99
|
 Mini Clip on wireless microphone wireless microphone US $26.00
|
 Nady DKW DUO Dual Channel VHF Handheld Microphone System US $29.00
|
 AUDIO TECHNICA ATW 252 T2 200 SERIES WHF WIRELESS SYSTEM WITH HANDHELD US $79.00
|
 Shure WH30TQG Headworn Condenser microphone New in Box US $29.99
|
 AKG C451E Vintage with capsule US $82.00
|
 SAMSON SYNTH 32 CHANNEL FREQUENCY SELECTABLE UHF GUITAR AND HEADSET WIRELESS US $119.00
|
 Schoeps BLM3 US $549.00
|
 3 BRAND NEW SHURE SM57 BUY IT NOW FREE SHIPPING USA US $274.88
|
 Shure SM 57 Dynamic Microphone MINT condition w original box US $43.00
|
 Wireless Microphone Lapel Clip On Complete Set new US $49.95
|
 ELECTRO VOICE RE1 Wireless Receiver Owned Used by STEVE VAI US $3.58
|
 NADY U 1000 UB 1000 Wireless System for Flo Evo Bo Ani Owned by STEVE VAI US $57.00
|
 Samson Stage 5H VHF Handheld Wireless System Channel 06 US $11.81
|
 Samson Stage 5H VHF Handheld Wireless System Channel 07 US $11.81
|
 Samson Stage 5H VHF Handheld Wireless System Channel 06 Not Working US $.99
|
 Audix OM 5 Dynamic Microphone GREAT CONDITION US $16.50
|
 Audix Micro D Mini Clip On Condenser Drum Microphone US $149.99
|
 Musicians Gear Die Cast Mic Stand Black US $15.99
|
 Polycom HDX Ceiling Microphone Array Cable Professional Microphone US $1,050.00
|
 |
Apple iPhone 3g Charger Port Dock Flex Cable + Mic Microphone + Buzzer Ringer or Loud Speaker + Antenna Sticker PRE-INSTALLED ASSEMBLED + WirelessFinest MicroFiber Cleaning Cloth List Price: $39.95 Sale Price: $2.97 Used From: $19.95  |
|
Pre-assembled KIT, including the dock USB charger connector port with flex cable + Mic + Buzzer Ringer or Loud Speaker + Antenna sticker, all OEM parts pre-installed, this whole kit go into the back housing below the main board and battery... |
 |
Music People SSB6500 Music People SSB6500 Carry Bag for Speaker Stands or Microphone Stands List Price: $36.30 Sale Price: $24.95 Used From: $23.87 |
|
For nearly 20 years, The Music People! Inc. has been on of the nation's leading suppliers of microphones and pro audio equipment. The Music People! Inc. also owns and manufactures On-Stage Stands� support stands... |
 |
Motorola 53724 Remote Speaker Mic List Price: $39.99 Sale Price: $16.49 Used From: $18.83 |
|
Talk and listen without ever reaching for your radio! The Motorola 53724 uses a handy microphone that clips on your shirt or collar for convenient use. Push-to-talk button and microphone are located on the accessory for quick and easy use... |
 |
Monster ClarityHD Precision Micro Portable Bluetooth Speaker (MBL CLY SPKR BT) List Price: $119.95 Sale Price: Too low to display Used From: $47.00 |
|
Get amazing room filling stereo sound from this incredibly small, portable speaker. Wirelessly connect ClarityHD Precision Micro Bluetooth Speaker to your Bluetooth equipped Blackberry or PC. It also acts as a speakerphone for hands-free calls on Blackberry and for chats on Skype with your PC... |
 |
Memorex MA3911MS Portable Wireless Bluetooth Speaker with Microphone List Price: $50.70 Sale Price: $23.50 |
|
Memorex Portable Wireless Bluetooth Speaker with Built-in microphone and Speakerphone Capability, MA3911MS, Mesh Grille |
 |
Motorola/ Acs #HMN9026 Speaker/Microphone List Price: $59.99 Sale Price: $35.17 |
|
Motorola HMN9026B Remote Speaker Microphone - for Spirit M, CLS, and XTN Radios |
 |
Koolertron (TM) Waistband Tour Teacher Voice Amplifier Portable Microphone Speaker N74 Aker Voice Amplifier 10watts Black MR1506, Portable, for Teachers, Coaches, Tour Guides, Presentations, Costumes, Etc. List Price: $45.99 Sale Price: $29.99 |
|
Descripation: For tour guides, teachers, lecturers, entertainers, cheerleaders, sales promoters, etc, protect your precious voice box and use portable voice amplifiers. First of its kind, top quality amp comes with longlife 1850 mA lithium-ion internal rechargeable batteries for up to 15 hrs continuous use per charge, similar battery like your mobile phone, for low maintenance cost... |
 |
Infinity Wakeboard 6100m 150-Watt Tower Speaker and Amplifier Audio System with Talkback Microphone List Price: $1,009.95 Sale Price: Too low to display |
|
Looking for a more moving audio experience? Take Infinity car audio for a ride. Innovative materials and breakthrough engineering have always put Infinity products out in front of the competition’s. So expect extreme output from these speakers, but be prepared for accuracy and detail that may surprise you... |
 |
Belkin Audio Y Cable Splitter 1-Mini Plug/2-RCA Plugs (6 Feet) List Price: $9.99 Sale Price: $0.01 Used From: $4.99 |
|
Belkin's Y Audio Cable lets you connect your PC's sound card with your mini stereo quickly and easily. It's also a convenient way to connect portable CD players and other audio sources with 3.5mm jacks to a stereo receiver or multimedia speakers... |
The Art of Microphone Placement When Recording Guitar
The biggest problem with many amateur guitarists is poor tone, and that's the first thing you might want to correct before you start placing a microphone for recording. Get down and listen to your amp and guitar combination on microphone level - that is where the microphone would be placed when recording. Adjust your tone so that you're happy with it, but remember one thing: the low-end will be increased with a microphone placed close to the source, which is known as proximity effect.
Like any other piece of kit, the same microphone can give tremendously different results depending on how it is used. To get the sound you are looking for takes a bit of expertise and a lot of experimenting. Even the best microphones available can sound “boomy” and unusable if not used correctly.
So, is microphone placement an art or a science? Well, it’s a little of both, but often just a matter of experimenting until you hear something you like.
To begin with, get a flashlight and press it against the cloth on your amplifier. This is to locate the centre of your speaker cone, once you’ve located the centre, mark it with a pen or some chalk. Next mark the edge of the speaker.
Take your microphone and stand it perpendicular to your amplifier at a 90-degree angle and point it at the centre mark you made earlier, this is known as on axis. Do some recording and listen to the sound files. You’ll find that the sound is aggressive, tremble filled, and maybe a little harsh.
Now move the microphone to the second, outer mark you made. Again, record some tracks and listen to the results. You’ll notice that the sound is a lot mellower than the first with less high end, however can sound a little dull or muddy.
The next step is to do a third recording with the microphone boom moved in on an angle between the points you made, this is known as off axis. This sound is a mixture of the two, not as aggressive as the first however not as dull as the second. Re-listen to the recordings and see what you like.
From here it is really all about experimenting until something grabs you, use on and off axis positions, use different parts of the speaker. It’s important to get the initial sound as you like, as it’s something less to worry about later with an eq, as sometimes you may not be able to fix it.
You might also try using two microphones on your amp - one close up and one farther back and mix and match the two. You also need to remember, when running your amp in a recording situation, recording it at the highest volume possible while still achieving your desired tone is really recommended.
But, how can you really blast your amp without annoying the neighbours? Well that’s where something called an isolation box comes in useful. Take a look at my article on Isolation Boxes.
About the Author
Richard Marples has over 10 years experience of playing and recording guitar, and also hosts a website exaplaining how you can record at home. If you enjoyed this article on Home Recording then you can get more free tips at =>
www.uncleslinky.co.uk
November 26th, 2009 in
Microphones | tags: audio, microphone, microphone speaker, microphone speaker circuit, microphone speaker feedback, microphone speaker software, microphone speaker system, music, recording, speaker