Microphone Speaker Splitter
Microphone Speaker Splitter
|
|
Rolls MS20 Mic Splitter $49.99 The Rolls MS20 Mic Splitter is a must when you need to split a male microphone XLR input to 2 XLR outputs equal to the original. Rolls builds a ground lift into the MS20 Mic Splitter to aid in elimination of ground loops. |
|
|
Rolls Ms20 Mic Splitter $49.99 The Rolls MS20 Mic Splitter is a must when you need to split a male microphone XLR input to 2 XLR outputs equal to the original. Rolls builds a ground lift into the MS20 Mic Splitter to aid in elimination of ground loops. |
|
|
Radial Engineering 8ox Eight Channel 3-way Microphone Splitter $849.99 The Radial 8ox is a high performance, 8-channel mic splitter with 3 outputs on each channel: a direct output for 48V phantom return, and auxiliary output with ground lift switch and a transformer isolated output. Although primarily designed for mic signals, the 8ox is equipped with a 20dB pad for line level sources. This makes the rackmountable 8ox highly adaptable for all types of signal splitting and particularly well-suited to accommodate live recording by delivering a transformer isolated audio signal path for the recording engineer while providing a direct feed to the front of house and monitor consoles.For maximum flexibility, several connector options are available: Inputs may be accessed via the front panel using standard XLRs or on the rear panel with choice of 25-pin D-subs wired to the TASCAM standard or Euro screw-down terminal connectors. Outputs include D-Subs and Euro connectors, which are also located on the rear panel. These make it easy to connect to popular multitrack recording systems while providing easy termination for permanent installations. Because it is 100% passive, it does not require any power to make it work and maximum durability is ensured with heavy-duty 14 gauge steel construction throughout. Comes standard with a custom wound Radial transformer. The Radial 8ox is a great sounding splitter that's easy to use, compact and convenient. |
|
|
Radial Engineering Js2 Passive Microphone Splitter Direct Box $219 Features electrically isolated XLR I/O, a second auxiliary direct throughput with ground lift, and a transformer-isolated output. Has a 30dB pad, supplies 48V DC phantom power for microphones, has a ground lift, and has common mode noise rejection up to -100dB at 60Hz. Features a stand-alone housing with 14-gauge, I-beam steel frame with baked enamel finish and an innovative bookend cover.Passive splitter direct boxElectrically isolated XLR I/OSecond auxiliary direct throughput with ground liftTransformer-isolated output30dB pad48V DC phantom powerGround liftCommon mode noise rejection up to -100dB at 60Hz14-gauge, I-Beam steel frameBaked enamel finishInnovative bookend cover |
|
|
ART S8 8-Channel Balanced Mic Splitter $239 The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen (eight pairs). Each channel of the S8 Microphone Splitter provides one direct output and one transformer isolated output from a single microphone, making it the ideal signal splitting solution for dividing mic signals for separate Front-of-House monitor mixes, or for remote recording applications. The direct outputs pass phantom power from the main mixer to the microphones for use with condenser microphones. The S8 includes a ground-lift switch on each isolated output to reduce hum due to ground loops between connected AC-powered units. For versatility the S8 mic splitter also features an attenuator pad switch on each input that can be used to connect preamplified signals to the two microphone-level outputs on each channel. Typical preamplified signals would originate from instrument preamplifiers, mixers, keyboards, etc.With such an extensive history of making audio processors, ART has consistently set new industry standards and watched competitors follow their innovation and the ART S8 Microphone Splitter is no exception. ART continues to set the bar for high-quality audio products at a reasonable cost to audio enthusiasts of all types. |
|
|
Radial Engineering 8Ox Eight Channel 3-Way Microphone Splitter $849.99 The Radial 8ox is a high performance, 8-channel mic splitter with 3 outputs on each channel: a direct output for 48V phantom return, and auxiliary output with ground lift switch and a transformer isolated output. Although primarily designed for mic signals, the 8ox is equipped with a 20dB pad for line level sources. This makes the rackmountable 8ox highly adaptable for all types of signal splitting and particularly well-suited to accommodate live recording by delivering a transformer isolated audio signal path for the recording engineer while providing a direct feed to the front of house and monitor consoles.For maximum flexibility, several connector options are available: Inputs may be accessed via the front panel using standard XLRs or on the rear panel with choice of 25-pin D-subs wired to the TASCAM standard or Euro screw-down terminal connectors. Outputs include D-Subs and Euro connectors, which are also located on the rear panel. These make it easy to connect to popular multitrack recording systems while providing easy termination for permanent installations. Because it is 100% passive, it does not require any power to make it work and maximum durability is ensured with heavy-duty 14 gauge steel construction throughout. Comes standard with a custom wound Radial transformer. The Radial 8ox is a great sounding splitter that's easy to use, compact and convenient.Compact 8-channel multipurpose mic splitterRear panel D-sub and Phoenix screw terminalsIdeal for live recording and signal distributionProvide broadcast or podcast feedFacilitate in-ear monitoring system |
|
|
ART ProSplit High Performance Mic Splitter $49 The ART ProSplit mic splitter provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or front-of-house mixer, with the second isolated output being sent to a monitor or recording mixer. The direct output passes phantom power from the main mixer to the microphone for use with condenser microphones. The ART ProSplit includes a ground-lift switch on the isolated output to reduce noise due to ground loops between connected equipment. For versatility, the ProSplit also features an attenuator pad switch on the input that can be used to alternately connect a preamplified (line-level) signal to the two microphone-level ProSplit outputs. |
|
|
Art Prosplit High Performance Mic Splitter $50 The ART ProSplit mic splitter provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or front-of-house mixer, with the second isolated output being sent to a monitor or recording mixer. The direct output passes phantom power from the main mixer to the microphone for use with condenser microphones. The ART ProSplit includes a ground-lift switch on the isolated output to reduce noise due to ground loops between connected equipment. For versatility, the ProSplit also features an attenuator pad switch on the input that can be used to alternately connect a preamplified (line-level) signal to the two microphone-level ProSplit outputs. |
|
|
Radial Engineering Js3 Passive Microphone Splitter Direct Box $259 Features electrically isolated XLR I/O, a direct throughput with ground lift, and 2 transformer-isolated outputs. Has a 30dB pad, delivers 48V DC phantom power for microphones, has a ground lift, and has common mode noise rejection up to -100dB at 60Hz. Features a standalone housing with 14-gauge, I-beam steel frame with baked enamel finish and an innovative bookend cover. It also uses a Jensen JT-MBD mic bridging transformer. The JT-MBD features a 1:1:1 with dual secondary windings to allow dual isolated outputs. This allows the JS-3 to be equipped with a main direct-out for FOH and 2 isolated outs for monitor mix and broadcast feed.Passive splitter direct boxElectrically isolated XLR I/ODirect throughput with ground lift2 transformer-isolated outputs30dB pad48V DC phantom powerGround liftCommon mode noise rejection up to -100dB at 60Hz14-gauge, I-Beam steel frameBaked enamel finishInnovative bookend cover |
|
|
Used Art S8 8-Channel Balanced Mic Splitter $217.49 The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen (eight pairs). Each channel of the S8 Microphone Splitter provides one direct output and one transformer isolated output from a single microphone, making it the ideal signal splitting solution for dividing mic signals for separate Front-of-House monitor mixes, or for remote recording applications. The direct outputs pass phantom power from the main mixer to the microphones for use with condenser microphones. The S8 includes a ground-lift switch on each isolated output to reduce hum due to ground loops between connected AC-powered units. For versatility the S8 mic splitter also features an attenuator pad switch on each input that can be used to connect preamplified signals to the two microphone-level outputs on each channel. Typical preamplified signals would originate from instrument preamplifiers, mixers, keyboards, etc.With such an extensive history of making audio processors, ART has consistently set new industry standards and watched competitors follow their innovation and the ART S8 Microphone Splitter is no exception. ART continues to set the bar for high-quality audio products at a reasonable cost to audio enthusiasts of all types.Dimensions: 5.25"H x 19 "W x 8"D (133mm x 483mm x 203mm)Weight: 12 lbs. (5.4 kg) Frequency response: 20 Hz to 20K Hz,±0.25 dB @ -15 dBu 3 dB at approximately 165K Hz THD+Noise: < 0.26% from 20 Hz to 20K Hz at - 15 dBu input< 0.1% from 45 Hz to 20K Hz at - 15 dBu input Phase Response Input Impedance: 0.002% Typical at 1K Hz, - 15 dBu input Less than 10 degrees at 20K Hz (ref. 1K Hz)Greater than 1.1K Ohms at 1K HzOutput Impedance (Typical driving source impedance is 150 Ohms): =105 dB @ 60 Hz >=Greater than 80 dB @ 3K Hz Voltage Insertion Loss: Approximately 2 dB at 1K HzMaximum Input Level: -1.4 dBu at 20 Hz, |
|
|
Art S8 8-Channel Balanced Mic Splitter $239 The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen (eight pairs). Each channel of the S8 Microphone Splitter provides one direct output and one transformer isolated output from a single microphone, making it the ideal signal splitting solution for dividing mic signals for separate Front-of-House monitor mixes, or for remote recording applications. The direct outputs pass phantom power from the main mixer to the microphones for use with condenser microphones. The S8 includes a ground-lift switch on each isolated output to reduce hum due to ground loops between connected AC-powered units. For versatility the S8 mic splitter also features an attenuator pad switch on each input that can be used to connect preamplified signals to the two microphone-level outputs on each channel. Typical preamplified signals would originate from instrument preamplifiers, mixers, keyboards, etc.With such an extensive history of making audio processors, ART has consistently set new industry standards and watched competitors follow their innovation and the ART S8 Microphone Splitter is no exception. ART continues to set the bar for high-quality audio products at a reasonable cost to audio enthusiasts of all types.Dimensions: 5.25"H x 19 "W x 8"D (133mm x 483mm x 203mm)Weight: 12 lbs. (5.4 kg) Frequency response: 20 Hz to 20K Hz,±0.25 dB @ -15 dBu 3 dB at approximately 165K Hz THD+Noise: < 0.26% from 20 Hz to 20K Hz at - 15 dBu input< 0.1% from 45 Hz to 20K Hz at - 15 dBu input Phase Response Input Impedance: 0.002% Typical at 1K Hz, - 15 dBu input Less than 10 degrees at 20K Hz (ref. 1K Hz)Greater than 1.1K Ohms at 1K HzOutput Impedance (Typical driving source impedance is 150 Ohms): =105 dB @ 60 Hz >=Greater than 80 dB @ 3K Hz Voltage Insertion Loss: Approximately 2 dB at 1K HzMaximum Input Level: -1.4 dBu at 20 Hz, |
|
|
Radial Engineering JS2 Passive Microphone Splitter Direct Box $219 Features electrically isolated XLR I/O, a second auxiliary direct throughput with ground lift, and a transformer-isolated output. Has a 30dB pad, supplies 48V DC phantom power for microphones, has a ground lift, and has common mode noise rejection up to -100dB at 60Hz. Features a stand-alone housing with 14-gauge, I-beam steel frame with baked enamel finish and an innovative bookend cover. |
|
|
Radial Engineering JS3 Passive Microphone Splitter Direct Box $259 Features electrically isolated XLR I/O, a direct throughput with ground lift, and 2 transformer-isolated outputs. Has a 30dB pad, delivers 48V DC phantom power for microphones, has a ground lift, and has common mode noise rejection up to -100dB at 60Hz. Features a standalone housing with 14-gauge, I-beam steel frame with baked enamel finish and an innovative bookend cover. It also uses a Jensen JT-MBD mic bridging transformer. The JT-MBD features a 1:1:1 with dual secondary windings to allow dual isolated outputs. This allows the JS-3 to be equipped with a main direct-out for FOH and 2 isolated outs for monitor mix and broadcast feed. |
|
|
Olympus Compact Shotgun Microphone $181.99 The Olympus ME-31 shot gun microphone's directional design limits interference from nearby sound sources. This is useful for recording a particular voice or signal that would otherwise be obscured or overpowered by other sources. For example, the ME-31 gun mic can help capture a keynote speaker at a conference without recording a lot of chatter from attendees. |
|
|
ART S8-3Way Eight-Channel Three-Way Mic Splitter $279 The S8-3WAY is an eight-channel three-way microphone splitter that is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals have to go to multiple mix locations. Each channel provides one XLR input, one XLR direct output with two additional transformer isolated XLR outputs for a total of 3 balanced outputs from each single microphone input signal.Typical uses would include sending 8 direct signals through the S8-3WAY to a main Front-of-house mixer, with additional feeds going to a monitor mix station while transformer balanced isolated feeds are sent to remote recording desk or used for a broadcast feed.The ART S8-3WAY features the same high-quality musical sounding transformers used in the popular ART S8, and is housed in a standard 1U space rack-mountable steel chassis designed for years of reliable operation. |
 |
 3ft Dual XLR Female to 2 RCA Male Plug Y Splitter Cable CablesOnline XR A103  US $9.45
|
 3ft 2 RCA Male Stereo Plug to 2 XLR Male Y Splitter Cable CablesOnline XR A303 US $10.45
|
 EV HANDHELD WIRELESS MIC SYSTEM PL22 CAS R300HDA US $289.00
|
 EV Electro Voice R300 HD Handheld Wireless R300HD PL22 GET $25 OFF US $279.99
|
 ART SplitCom Pro 2 Way Mic Splitter Combiner US $35.00
|
 ART ProSplit High Performance Mic Splitter US $50.00
|
 SHURE UA221 Passive Antenna Splitter Combiner Kit US $126.29
|
 AKG WMS450 Wireless Guitar Set Band 1 US $399.00
|
 Electro Voice R300 Lavalier Wireless System in Case Ch B US $309.00
|
 ART S8 8 Channel Balanced Mic Splitter US $239.00
|
 Electro Voice R300 Handheld Wireless System in Case Ch B US $299.00
|
 Electro Voice R300 Headworn Wireless System in Case Ch B US $309.00
|
 Electro Voice R300 Handheld Wireless System in Case Ch A US $299.00
|
 ART SplitCom Pro 2 Way Mic Splitter Combiner US $35.00
|
 Electro Harmonix 12AY7 Tube Microphone Preamp US $194.70
|
 Sennheiser AC 3 Antenna Combiner US $649.95
|
 EV WIRELESS UNI LAPEL SYSTEM IN CASE R300LA US $299.00
|
 EV Electro Voice R300 Wireless Handheld Microphone System with PL22 Mic NEW US $299.00
|
 EV PROFESSIONAL WIRELESS MICROPHONE R300 UHF CORDLESS HIGH END DJ KARAOKE MIC US $299.99
|
 Microphone Cable lot Speaker Jack Plug Mic Metal Splitter US $9.99
|
 |
Belkin Audio Y Cable Splitter 1-Mini Plug/2-RCA Plugs (6 Feet) List Price: $9.99 Sale Price: $0.01 Used From: $4.99  |
|
Belkin's Y Audio Cable lets you connect your PC's sound card with your mini stereo quickly and easily. It's also a convenient way to connect portable CD players and other audio sources with 3.5mm jacks to a stereo receiver or multimedia speakers... |
 |
Belkin Speaker and Headphone Splitter List Price: $6.99 Sale Price: $0.31 |
|
The Belkin Y Splitter Adapter Mini connects two stereo speakers or headphones to the mini-stereo jack on your iPod and cassette, MP3, or CD player. It's great for iPods. The gold-plated contacts ensure accurate data transfers and crisp, clean sound... |
 |
StarTech.com MUYHSMFF 3.5mm 4-Pin to 2x 3-Pin 3.5mm Headset Splitter Adapter - M/F List Price: $10.99 Sale Price: $3.99 |
|
The MUYHSMFF 4-Pin 3.5mm to dual 3-pin 3.5mm Headset Splitter Adapter features one 3.5mm Male and two 3.5mm Female connectors, allowing you to add a microphone input as well as an audio output to your PC or Laptop, through a single 3... |
 |
Belkin F8V234-WHT-APL Headphone Splitter List Price: $9.98 Sale Price: $1.49 |
|
The Belkin Headphone Splitter lets you connect two stereo headphones into a single mini-stereo jack on your iPod, MP3 player, or any device with a 3.5-mm audio jack. With the splitter, you and your friend can listen to music at the same time... |
 |
Dual 3.5mm Jack Stereo Headphone Adapter for Apple iPad List Price: $14.00 Sale Price: $0.01 |
|
Connects two stereo speakers or headphones to the 3.5mm stereo jack on your Apple iPad, iPhone, iPod, MP3 or any device with 3.5mm input.(White) |
 |
Headset Buddy Adapter: Smartphone Headset to PC Adapter - Use a 3.5mm iPhone/Smartphone Headset With Your PC, Converts 3.5mm Plug to Dual Mic/Audio 3.5mm, for Skype/VOIP (01-PH35-PC35) Sale Price: $12.68 |
|
Why buy and carry around another headset for your PC? Use your existing 3.5mm smartphone/iPhone headset with your PC computer that has 3.5mm jacks! A big productivity enhancer for home businesses, sales people, road warriors, or anyone who is on the phone all the time, but doesn't want to carry two headsets, one for the computer, and one for the phone... |
 |
RiteAV - 3.5mm to RCA Stereo Female Cable - 6 inch List Price: $0.00 Sale Price: $0.01 Used From: $0.01 |
|
RiteAV - 3.5mm to RCA Stereo Female Cable - 6 inch |
 |
6-in Stereo 3.5mm (1/8") Y-Splitter, 1 Male to 2 Female List Price: $0.00 Sale Price: $0.01 Used From: $0.01 |
|
6-inches Stereo 3.5mm (1/8") Male to Two Stereo 3.5mm (1/8") Females Y-Splitter. |
 |
Cables To Go 40408 3.5 mm Male/Female Stereo Audio Extension Cable - Black (12 Feet/3.65 Meters) List Price: $5.99 Sale Price: $0.01 Used From: $0.01 |
|
Extend the distance between stereo audio devices using the 3.5mm connection, such as CD players, stereos, speakers, PC/TV tuners and other audio devices. You'll enjoy lasting quality and excellent performance no matter the connection... |
 |
3.5mm Stereo Male to Female Extension Cable 25 ft. List Price: $6.99 Sale Price: $0.01 Used From: $0.49 |
|
Portable DVD players, laptops, portable CD players, MP3 players, iPods, PCs, and projectors all have one thing in common—a 3.5 mm (1/8") stereo audio jack. This stereo audio extension cable features a 3... |
trying to fit a 5.1 speaker system onto my old soundcard?
Hey everyone, I have a lil dilemma here...
I had a nice 4.1 system (altec lansing) that came with my PC ive now had for about 5-6 years now. I ended up blowing out the subwoofer and so I bought a new set of speakers which are the Logitech x-540 5.1 system. Heres the pics of it to help show u what im talking about; http://techgage.com/article/logitech_x-540_51_speakers/.
Anyways im trying to find out if I can somehow convert the three inputs needed to go into my soundcard some how by maybe a cable splitter or something since my sound card only has 1 microphone and 1 speaker jack. I do have a 2 way splitter tho which makes 2 wires go into one from my old system but I dont know if it will help. Please give me some suggestions, im really stumped. Most help gets 10 pts. THANKS!!!!
I would highly recommend that you invest in a 5.1 sound card. Sound Blaster Live! cards are very inexpensive and I believe the lowest end card that supports 5.1. It should be insanely cheap at Newegg.com
This link should list their 5.1 cards
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010360057%201101108501&bop=And&Order=PRICE
April 3rd, 2008 in
Microphones | tags: audio, electronics, hardware, microphone speaker splitter, recording, video