Microphone Amp
Microphone Amp
|
|
Sennheiser Evolution E906 Dynamic Guitar Amp Microphone $189.95 The Sennheiser e906 instrument microphone was primarily designed for guitar amplifiers, but it is also an excellent choice for percussion and brass applications. It has a supercardioid polar pattern, a flat body shape, very fast response, a hum-compensating coil that minimizes self noise, and 3 selectable characters (Bright, Normal, and Smooth).Lively, full soundVery fast attackFlat shape of microphone body perfect for guitar amps3 adjustable sound characteristics (Bright, Normal, Smooth)Hum-compensating coil for low self noiseRugged metal body |
|
|
Solid State Logic X-Rack Microphone Amp Module $845 The Solid State Logic X-Rack Microphone Amp Module is an angelically pure and versatile input section with a choice of three separate input amplifiers: Mic amp, front panel instrument input, or line input. Designed for transparency and versatility with a set of high and low-pass filters, phase reverse, and everything you need from a very classy workhorse.Please note: The X-Rack XR621 Mic Amp Module works in conjunction with the XR622 XR Master Module. |
|
|
Applied Microphone Technology Amt P800 Studio Clip On Trumpet Microphone System $742 The AMT P800 Studio microphone system combines the most natural sounding trumpet specific microphone system on the market with the AMT AP40 floor pre-amp. The AP40 converts the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary on certain models or instruments in order to maintain the most natural reproduction of sound in conjunction with achieving the most amount of gain before feedback in a live application. The output of the preamp is an XLR Low Impedance balanced output. The output sends signal at Mic Level.The AMT P800 Studio Trumpet microphone system features an element somewhere in size between a small and large diaphragm, which prevents even the loudest of trumpet players to not overload the microphone. AMT has developed their special "Off the bell" clamping system for this model which clamps to the mouthpipe of the trumpet or flugelhorn. The AMT P800 microphone allows the player to easily change to and from AMT different preamps and allows for direct connections to either Shure or Sennheiser beltpack transmitters. With a change in a cable, convert your P800 from a "Studio" style preamp, to a "Belt pack" series model, or to the AMT "W"ireless setups. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. Phantom power or 9Volt battery required. Comes with AP40 floor or "DI" style preamp, hardshell case, and AMT disconnecting cable technology to allow the microphone to be used as "Wireless" or "BP" models if needed. (Additional cables for a variety of setups sold separately. The AMT Interface is also sold separately to allow connections for many wireless systems.)Natural sounding trumpet specific microphone systemSpecial element prevents microphone overload"Off the bell" clamping systemPre-amp regulates voltage to each microphoneConverts microphones to low impedanceGround Lift switchOperates with Phantom power or 9-Volt batteryIncludes hardshell case and cablesConverts from a "Studio" style preamp, to a "Belt pack" series model, or to the AMT "W"ireless setup |
|
|
Applied Microphone Technology AMT S18C Cello Condenser Microphone $663 The S18C is an electret-condenser microphone that has been designed for cello. All of the mic'ing parameters that are problematic for string instruments have been addressed. To be able to get the most gain before feedback it uses a very tight pattern to give a high rejection to surrounding noise, at the same time reproducing accurately the subtleties of the cello. As placement is especially important with an instrument that has a fine finish and varying dimensions, this microphone's attachment mechanism is designed to secure the mic to the cello in different positions taking seconds to attach. This mechanism is fitted with natural soft suede so as not to mark or mar instrument.Made from aluminum to keep the mass low yet extremely strong, this microphone will remain durable through many years of use. The flex arm is easy to position yet retains it's placement throughout the most active of performances. The mic has an LED that can be easily seen while performing. This indicates status of a battery or phantom power. The pre-amp for the microphone is rugged anodized aviation aluminum, which houses the electronics that can be placed on the floor. This pre-amp utilizes a circuit that can change EQ, curve, and gain by exchanging EPROM-like chip. The preamp runs off of battery or phantom power. The output is terminated with a male XLR type connector for balanced use. The mic is connected to the preamp by a 4-pin locking connector. |
|
|
Applied Microphone Technology AMT P800 Studio Clip-On Trumpet Microphone System $742 The AMT P800 Studio microphone system combines the most natural sounding trumpet specific microphone system on the market with the AMT AP40 floor pre-amp. The AP40 converts the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary on certain models or instruments in order to maintain the most natural reproduction of sound in conjunction with achieving the most amount of gain before feedback in a live application. The output of the preamp is an XLR Low Impedance balanced output. The output sends signal at Mic Level.The AMT P800 Studio Trumpet microphone system features an element somewhere in size between a small and large diaphragm, which prevents even the loudest of trumpet players to not overload the microphone. AMT has developed their special "Off the bell" clamping system for this model which clamps to the mouthpipe of the trumpet or flugelhorn. The AMT P800 microphone allows the player to easily change to and from AMT different preamps and allows for direct connections to either Shure or Sennheiser beltpack transmitters. With a change in a cable, convert your P800 from a "Studio" style preamp, to a "Belt pack" series model, or to the AMT "W"ireless setups. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. Phantom power or 9Volt battery required. Comes with AP40 floor or "DI" style preamp, hardshell case, and AMT disconnecting cable technology to allow the microphone to be used as "Wireless" or "BP" models if needed. (Additional cables for a variety of setups sold separately. The AMT Interface is also sold separately to allow connections for many wireless systems.) |
|
|
Akg C516ml Miniature Instrument Microphone $189 The AKG C 516 ML is a lightweight cardioid mini microphone for use on accordions, guitar speakers, piano and keyboard/organ cabinets. The included screws and double-sided, solvent-free adhesive pads make it easy to install the microphone on your musical instrument or amp exactly where you need it. Using two C 516 MLs (one on the bass and one on the treble side) and an optional B 29 L battery power supply is an ideal way to mic up an accordion. The C 516 ML is the only version available and can be used with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters. Cardioid instrument microphone with miniature mounting bracket High mechanical-noise attenuation Including wireless direct adapter for easy use with AKG pocket transmitters Detachable microphone cable Ideal for miking up accordions and guitar, piano, keyboard, or organ amplifiers Includes 2 double-sided adhesive rubber plates, 3 countersunk bolts (3 x 30 MM), 3 self-tapping screws (2.9 x 13 mm), A 400 adapter, adhesive compound, H 516 Mount Plate, microphone bag, and W44 windscreen |
|
|
Applied Microphone Technology AMT VS Studio Clip-On Condenser Microphone System $663 The AMT VS Studio version combines the natural AMT VS Studio Clip-On microphone system with the AMT AP40 floor pre-amp. The AP40 converts the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary on certain models or instruments in order to maintain the most natural reproduction of sound in conjunction with achieving the most amount of gain before feedback in a live application. The output of the preamp is an XLR Low Impedance balanced output. The output sends signal at Mic Level. The AMT VS Studio version is meant to be used either in a studio setting where close miking of an instrument is desired OR in a professional level setting where the sound engineer needs control of the microphone.Requires phantom power. |
|
|
Shure Pg27-Usb Usb Condenser Microphone $199 The PG27USB side-address condenser microphone easily plugs into a computer USB port for the convenience of digital recording. Designed with a flat frequency response, the PG27USB naturally reproduces a wide variety of acoustic, amplified and vocal sound sourceswith professional clarity and guaranteed "Plug and Play" Shure quality. Includes a 9.8ft (3m) USB cable, stand adapter and a zippered pouch.USB Plug and Play connectivity allows the convenience of digital recording, anywhere your computer can go.Compatible with Windows Vista, XP, 2000 and Mac OS X (10.1 or later)Integrated pre-amp with Microphone Gain Control allows control of input signal strengthZero Latency Monitoring for real-time playback and multi-tracking without disorientation1/8" Headphone jack for monitoringMonitor Mix Control for blending microphone and playback audioIncludes a 9.8ft (3m) USB cable, stand adapter and a zippered pouch |
|
|
Astatic By Hohner Replacement Cable For Jt30 Harmonica Microphone $31 This is an Asiatic by Hohner 20' high-impedance 1/4" amp replacement cable with connector for use with the JT30 Roadhouse Harmonica Microphone. The JT30 Roadhouse Harmonica Mic is our exclusive version of this hand-held harp mic with volume control. The JT30 Roadhouse Microphone produces that classic, dirty Chicago blues harp tone. Plug it directly into your amp using this harmonica mic cable.20 ft. High impedance 1/4" amp cable Connects to JT30 roadhouse harmonica mic |
|
|
K&M Amp Stand Black $74.99 The K&M Amp Stand is a highly portable amp/monitor stand that holds up to 77 lbs. The angled front legs create extra strength and stability while the back leg can be adjusted to allow a tilt between 15 and 28 degrees. It also includes a handy 5/8" threaded connection for attaching a microphone boom for simplified recording or sound reinforcement of your amp. |
|
|
Applied Microphone Technology Amt Ws Studio Clip On Double Microphone System $670 The AMT WS Studio version combines the AMT WS Clip-On Double Microphone system with the AMT AP40 floor pre-amp. The AP40 converts the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary on certain models or musical instruments in order to maintain the most natural reproduction of sound in conjunction with achieving the most amount of gain before feedback in a live application. The output of the preamp is an XLR Low Impedance balanced output. The output sends signal at Mic Level. The AMT WS is a low profile double condenser microphone system that attaches to the clarinet, alto and bass flute, or oboe with a ultra-miniature low mass clamp. It is specifically designed for the timbre of the clarinet. The microphone provides pure tonal reproduction while being unobtrusive. It has an even reproduction of sound across the entire instrument. The AMT WS features a flexible gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive. The AMT WS Studio comes with two isolation rings. Both instrument microphones are suspended in AMT's iso-ring technology which allows more gain before feedback and less handling noise. The AMT WS Studio version is meant to be used either in a Studio setting where close miking of an musical instrument is desired or in a professional level setting where the sound engineer needs control of the microphone. Requires phantom power.2 AMT WS condenser Microphones Flexible Gooseneck AMT AP40 Floor Pre-amp Hard shell protective case |
|
|
Shaker WSB Harmonica Microphone $59.96 The Shaker WSB has been designed to be Shaker's most affordable crystal microphone, voiced specifically for harmonicas. It's a great blues tool, hard-wired with a 10-foot cable and a 1/4" plug, and it can even act as a great back up mic. It's a great beginner mic that's easy on the wallet, yet gives professional performance and awesome tone, along with great feedback rejection. The mic is extremely economical, has hot crystal element, is voiced to cut through other sounds, has a clear and aggressive tone, and is ergonomically designed to be very easy to hold. Shaker Harmonica Microphones are part of a sophisticated music making system, one that includes the harmonica, the player's hands, the microphone, the amp, and the player's personal techniques. Traditional methods of measuring response and behavior become pretty much irrelevant because Shaker's don't fit strictly into the established categories of polar patterns. By using a sampling of the harmonica's sound and directing it through acoustic ports into a volume-tuned chamber, Shaker mics become, in essence, miniature hand-held recording studios. This is known as Shaker GNS technology, or good noise sampling, resulting in great tone, extreme technique sensitivity, and tremendous feedback. Designed and engineered by Shakey Joe, these mics are totally handmade in the US and use as many American-made parts as possible, making Shaker microphones the real deal. Made in the Arizona desert by harp players, for harp players. |
|
|
Shaker Wsb Harmonica Microphone $59.96 The Shaker WSB has been designed to be Shaker's most affordable crystal microphone, voiced specifically for harmonicas. It's a great blues tool, hard-wired with a 10-foot cable and a 1/4" plug, and it can even act as a great back up mic. It's a great beginner mic that's easy on the wallet, yet gives professional performance and awesome tone, along with great feedback rejection. The mic is extremely economical, has hot crystal element, is voiced to cut through other sounds, has a clear and aggressive tone, and is ergonomically designed to be very easy to hold.Shaker Harmonica Microphones are part of a sophisticated music making system, one that includes the harmonica, the player's hands, the microphone, the amp, and the player's personal techniques. Traditional methods of measuring response and behavior become pretty much irrelevant because Shaker's don't fit strictly into the established categories of polar patterns. By using a sampling of the harmonica's sound and directing it through acoustic ports into a volume-tuned chamber, Shaker mics become, in essence, miniature hand-held recording studios. This is known as Shaker GNS technology, or good noise sampling, resulting in great tone, extreme technique sensitivity, and tremendous feedback. Designed and engineered by Shakey Joe, these mics are totally handmade in the US and use as many American-made parts as possible, making Shaker microphones the real deal. Made in the Arizona desert by harp players, for harp players.Crystal elementOutput: hardwired with a 10' cable and 1/4" plug |
|
|
Applied Microphone Technology AMT WS Studio Clip-On Double Microphone System $670 The AMT WS Studio version combines the AMT WS Clip-On Double Microphone system with the AMT AP40 floor pre-amp. The AP40 converts the microphones to low impedance, it regulates the voltage to each microphone, and with certain models creates a specific frequency curve. The curve is necessary on certain models or musical instruments in order to maintain the most natural reproduction of sound in conjunction with achieving the most amount of gain before feedback in a live application. The output of the preamp is an XLR Low Impedance balanced output. The output sends signal at Mic Level. The AMT WS is a low profile double condenser microphone system that attaches to the clarinet, alto and bass flute, or oboe with a ultra-miniature low mass clamp. It is specifically designed for the timbre of the clarinet. The microphone provides pure tonal reproduction while being unobtrusive. It has an even reproduction of sound across the entire instrument. The AMT WS features a flexible gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive. The AMT WS Studio comes with two isolation rings. Both instrument microphones are suspended in AMT's iso-ring technology which allows more gain before feedback and less handling noise. The AMT WS Studio version is meant to be used either in a Studio setting where close miking of an musical instrument is desired or in a professional level setting where the sound engineer needs control of the microphone. Requires phantom power. |
|
|
Astatic by Hohner Replacement Cable for JT30 Harmonica Microphone $31 This is an Asiatic by Hohner 20' high-impedance 1/4" amp replacement cable with connector for use with the JT30 Roadhouse Harmonica Microphone. The JT30 Roadhouse Harmonica Mic is our exclusive version of this hand-held harp mic with volume control. The JT30 Roadhouse Microphone produces that classic, dirty Chicago blues harp tone. Plug it directly into your amp using this harmonica mic cable. |
|
|
Applied Microphone Technology Sp25b-Tp Tailpiece Acoustic Bass Microphone $972 The AMT SP25B-TP is an electret-condenser microphone system that has been designed for acoustic bass. The mic system has exactly the same sound characteristic and functions as the famed SP25B, however the "TP" (tail piece) systems includes the ability to mount to the tail piece of an acoustic bass. The system also comes with the Super Preamp.All of the parameters that are problematic for the double bass have been addressed. The AMT SP25B-TP will acquire the most gain before feedback by using a very tight pattern to give a high rejection to surrounding noise. At the same time, the system reproduces with great definition capturing all of the subtleties of the bass.As placement is especially important with an instrument that has a fine finish and varying dimensions, this microphone's attachment mechanism is designed to attach to the tailpiece of the instrument. This allows the instrument and the microphone to be placed back into a carrying case without having to remove the microphone from the body of the instrument. This AMT microphone also features D.C.T. (Disconnect Cable Technology). D.C.T. allows you to remove and replace the cable from the microphone.Made from aluminum to keep the mass low yet extremely strong, the SP25B mic will remain durable through many years of use. The flex arm is easy to position yet retains it's placement throughout the most active of performances.Made from aluminum to keep the mass low yet extremely strong, this microphone will remain durable through many years of use. The Super preamp for this system is rugged and made of anodized aviation aluminum, which houses the electronics.The preamp can be placed on the floor and out of the way. This preamp uses a complex circuit that is tailored to the needs of an acoustic bass guitar player. The preamp runs off of 9-volt battery or phantom power. There are three outputs on a super preamp. One is terminated with a male XLR type connector for balanced use. The second output on a Super Preamp is a 1/4" "line driver" with a separate volume control for connecting to bass amps. Keep in mind that this system is a condenser microphone and intended to be used with equipment designed for microphones and not pickups. Depending on how your amp is manufactured you could have different results with a Super Preamp. Certain amps will work better than others with this system. All PA systems will work well. The third output is a ground lifted isolation split.The AMT mic is connected to the preamp by a four pin locking connector. The system comes with "SP" (Super Preamp) with 2 XLR Outputs, 1 1/4" inch line driver output, and a hardshell case.Mounts to tailpiece of acoustic bassesCaptures great definition and subtletiesRemovable cordMade from lightweight, durable aluminumIncludes microphone, cable, Super Preamp, and hardshell case |
|
|
Applied Microphone Technology Amt S18c Cello Condenser Microphone $663 The S18C is an electret-condenser microphone that has been designed for cello. All of the mic'ing parameters that are problematic for string instruments have been addressed. To be able to get the most gain before feedback it uses a very tight pattern to give a high rejection to surrounding noise, at the same time reproducing accurately the subtleties of the cello. As placement is especially important with an instrument that has a fine finish and varying dimensions, this microphone's attachment mechanism is designed to secure the mic to the cello in different positions taking seconds to attach. This mechanism is fitted with natural soft suede so as not to mark or mar instrument.Made from aluminum to keep the mass low yet extremely strong, this microphone will remain durable through many years of use. The flex arm is easy to position yet retains it's placement throughout the most active of performances. The mic has an LED that can be easily seen while performing. This indicates status of a battery or phantom power. The pre-amp for the microphone is rugged anodized aviation aluminum, which houses the electronics that can be placed on the floor. This pre-amp utilizes a circuit that can change EQ, curve, and gain by exchanging EPROM-like chip. The preamp runs off of battery or phantom power. The output is terminated with a male XLR type connector for balanced use. The mic is connected to the preamp by a 4-pin locking connector.A Condenser Microphone Specifically Designed For CelloFlexible Gooseneck ArmLED Indicates Status Of A Battery Or Phantom PowerFloor Preamp With XLR OutputTerminated With A Male XLR Type Connector For Balanced UseRugged Anodized Aviation Aluminum ConstructionHardshell Blo-Mold Protective Case |
 |
 MXL GENESIS Recording Studio Mic TUBE CONDENSER MICROPHONE GOLD  US $202.50
|
 M AUDIO AUDIO BUDDY DUAL MICROPHONE PREAMP DIRECT BOX US $24.50
|
 New Vtech VT 1030 Dynamic Cable Consumer Microphone US $24.99
|
 STAGELINE MIC MICROPHONE CLIP MOUNT CLAMP 4 STAND DRUM US $9.49
|
 Whirlwind MD 1 US $175.00
|
 PH1 PHANTOM CONDENSER MIC OMNI RECORDING MICROPHONE US $24.99
|
 Samson C01U USB Studio Condenser Microphone US $18.50
|
 Blue Baby Bottle Mic with shock mount pop filter cherry box NEW In Box US $200.00
|
 DOD VoTec Vocal Multi Effects Processor Microphone Pre Amp US $9.99
|
 MXL 990 Condenser Cable Professional Microphone US $54.99
|
 5pcs set YPA M601 Cardioid Dynamic Wired Instrument Mic US $129.99
|
 Beyerdynamic drums microphones 3x Opus 88 TG D58c 1x Opus 99 TG D70d US $310.00
|
 Samson Go Mic Portable USB Condenser Microphone SAGOMIC US $6.50
|
 Cascade FAT HEAD II Single Element Ribbon Microphone US $93.00
|
 MXL 990 Condenser Professional Microphone NEW US $75.00
|
 XLR Male to Female 3 pin Microphone Extension Extender Speaker AMP Cable 2m607 US $2.78
|
 Right Angle 1 4 Male Mono to XLR Male Guitar Recording Speaker AMP Cable 2m613 US $2.98
|
 New 1 4 Male Mono TS Gold Tip to XLR Female Jack Speaker Audio AMP Cable 2m609 US $2.88
|
 Samson MB1 Mini Boom Stand NEW US $21.95
|
 MXL MXL 990 Condenser Microphone with Shockmount US $59.99
|
 NEW AKG PERCEPTION 220 PROFESSIONAL CONDENSER MIC 4834 US $169.99
|
 Shure LX4 Wireless Mic Microphone Receiver and Path Cord 169505 MHz LX4 AD US $99.99
|
 Ultimate Support JS KD50 Jamstand Kick Drum Guitar Amp Mic Stand US $12.00
|
 SM Pro Audio PR8E Multichannel Microphone Preamplifier US $150.00
|
 Symetrix 528E Voice Processor Compressor Limiter Pre Amp US $215.00
|
 Vintage electrovoice hiz microphone type 630 US $25.00
|
 Condenser Instrument Mic YPA M602 Drum Microphone NEW US $59.99
|
 YPA M606 Condenser Vocal Instrument Microphone 2pcs NEW US $49.99
|
 Classic Audio Technica AT MB Midnight Blues Drum Mic Microphone 7 Piece Set US $150.00
|
 Universal Audio 2 610 mic pre amp US $1,300.00
|
 shure 588sd US $10.00
|
 True Audio 8 Channel Mic Pre Amp US $521.00
|
 Audio Technica DR GX1 Microphone US $15.00
|
 MXL Genesis Microphone US $410.00
|
 Universal Audio Solo 610 Pre Amp Near Mint Excellent with packaging US $699.00
|
 Focusrite ISA 220 Session Pack Mic Preamp US $1,200.00
|
 Groovetube GT55 Pro Studio Condensor Microphone US $350.00
|
 TC Helicon Voicetone Harmony G US $200.00
|
 SDSYSTEM LCM80EW SOPRANO MICROPHONE US $400.00
|
 API A2D Dual 312 Mic Preamps with Digital Output DEMO US $1,000.00
|
 Blue Baby Bottle Condenser Microphone US $.99
|
 MXL 990 Condenser Microphone US $40.00
|
 AP Audio AMP55 AMP 55 Classic Dynamic Microphone US $25.00
|
 Chandler limited germanium pre amp with PSU US $800.00
|
 Audio Technica MB1000H neodymium Dynamic Cable Professional Microphone US $25.00
|
 Oktava MKL2500 Condenser Professional Microphone Studio Excellent Condition US $100.00
|
 SAMSON C01U Cable USB Studio Condenser Recording Professional Mic Microphone US $14.95
|
 Avalon M5 MONO Pure Class A Mic Preamp US $1,099.99
|
 SAMSON C01U Professional Mic Cable USB Studio Condenser Recording MIC ONLY US $9.99
|
 On Stage Boom Mic Stand US $1.75
|
 |
VideoSecu High Sensitive Pre-amp Microphone for CCTV Security Camera Surveillance System Audio Sound Monitoring with Free Warning Decal A90 List Price: $39.99 Sale Price: $9.99  |
|
Collect audio evidence as important as capturing video evidence, this preamp microphone is a perfect addition to any video security camera system. This high sensitive mini preamp microphone is the best for CCTV professionals, with Preamplifier IC built on board, it increases a microphone's low output voltage to a stronger, more usable level, and it features low noise, high sensitive and auto level adjustment on-board preamp circuit. |
 |
On Stage MS7920B Amp and Bass Drum Short Microphone Stand List Price: $45.99 Sale Price: $23.04 Used From: $22.85 |
|
The On Stage MS7920B features a U shape base instead of the heavy tripod design. Great for kick drums or amplifiers. Height Adjustment: 8-14 Boom Length: 16 Base Spread: 4.5- 7.5 |
 |
NEW Low Profile BOOM MICROPHONE STAND w. CLIP - Mic Amp Sale Price: $13.99 |
|
Ideal for placing microphones in front of amplifier speakers. Adjusts up to 64" inches! The boom arm measures 22" inches. With adjustable ranges like this, The stand can be used for vocals, drums, guitars, cabinets, horns, and pretty much anything else! Many adjustable options... |
 |
Blue Microphones Icicle XLR to USB Mic Converter/Mic Preamp List Price: $59.00 Sale Price: Too low to display Used From: $47.89 |
|
The Icicle is Blue's new stylish USB converter and mic preamp combo that allows you to connect any XLR microphone directly into your computer via USB. The Icicle features a studio quality microphone preamp, 48V phantom power, fully balanced low noise front end, analog gain control, and driverless operation... |
 |
Blue Microphones Yeti Pro USB Condenser Microphone, Multipattern. List Price: $249.00 Sale Price: Too low to display Used From: $186.75 |
|
The Yeti Pro is the world’s first USB microphone combining 24 bit/192 kHz digital recording resolution with analog XLR output.Featuring three custom condenser capsules and four different pattern settings, the Yeti Pro can capture digital audio with up to fourtimes the clarity found on CDs... |
 |
Naxa NAM-984 Professional Dual Wireless Microphone Kit List Price: $24.99 Sale Price: $16.99 Used From: $20.29 |
|
Naxa NAM-984* Wireless Receiver for Enhanced Mobility * Two Professional Microphones* Ideal for Meetings, Events and Karaoke |
 |
Plantronics GameCom 367 Closed-Ear Gaming Headset List Price: $59.99 Sale Price: $37.71 |
|
The closed-ear GameCom 367 headset delivers an immersive audio experience with 50 mm stereo speakers and specially designed earpods that redistribute pressure for maximum comfort. When you're ready to fire off orders, unveil the hidden, noise-canceling mic boom to strategize clearly with team members... |
 |
Behringer AMP800 Four Channel Headphone Amp List Price: $129.99 Sale Price: $46.99 Used From: $39.99 |
|
If you're tracking more than one musician at a time, or if everyone in a group wants to listen to a playback, you need a monitor distribution system. The compact, flexible AMP800 can power up to eight pairs of headphones and up to two different stereo mixes... |
 |
ART Tube MP Studio Mic Preamp List Price: $86.00 Sale Price: $29.99 Used From: $29.00 |
|
The original Tube MP made pro-caliber tube preamping available to ordinary musicians and home studios. The MP Studio goes a step further by adding a VU meter for better level control and ART's OPL (Output Protection Limiter), which controls and maintains the output peak signal to protect hard-disk recording systems and soundcards... |
 |
VideoSecu High Sensitive Preamp Microphone Kit for Security Audio Sound Voice Monitoring Recording Free 50 Feet Cable, Power Supply and Warning Decal WE6 List Price: $79.00 Sale Price: $24.99 |
|
Collect audio evidence as important as capturing video evidence, this preamp microphone kit is a perfect addition to any video security camera system. This high gain mini preamp and microphone is the best for CCTV professionals, with Preamplifier IC built on board, it increase a microphone's low output voltage to a stronger, more usable level, it features low noise, high gain and auto level adjustment on-board preamp circuit... |
For Wonderful Effects Choose Line 6 Guitar Amps
Line 6 was founded in 1996 and was based in Agoura Hills, California. It is a producer of digital modeling electric guitars, acoustic guitars,amplifiers and for good effects processors.The company experienced a quick expansion in the early 2000s due to it’s achievement of their POD branded product that reproduced the sound of various classic and amazing modern guitar amplifiers, effects pedals,amplifier cabinets and other microphones, with a high-quality deal of accuracy. The PODxt Live product is a current development, and extends the characteristics of the unique POD with more reproductions and effects in a pedal board package. Line 6 now has numerous other product lines in production:Line 6 has an energetic user community, and that provides software, which allows users to simply download and share patches or machine settings. This software covers all of Line 6's obtainable flagship products.Their products are used and authorized by many expert artists.Line 6 guitar amps offers stirring various kinds of effects, consisting of chorus/flanger, phase, tremolo, digital delay, tape echo, and other sweep echo as well. By using Smart FX all effects could be jerked easily, Top Tempo permits change of delay times.Line 6 has come up with the Spider II guitar amp with the Smart Control FX.By using the delay knob you could select a standard delay, tape echo, and other sweep echo. You have an option to choose among chorus/flange, phase,and as well from tremolo using the modulation effect knob.Line 6 guitar amps Tap Button permits you to set the pace of your delay effects, as well as gives you entrée to a Tuner, Distortion Boost, and a built-in Noise Gate.The distortion improve of the Line 6 guitar amp permits you to hit the model harder and get a more indistinct sound, by boosting your guitar signal before it attaining the Amp Model.Line 6 amps built-in Noise Gate would help to cut down on hiss and noise. You would recognize the gate is on when the Channel D LED comes on. When you get the Line 6 guitar amp you will discover even more hidden functions.
About the Author
Rocky is a Copywriter of www.gigasonic.com
He has written many articles in various topics.For more information visit:
www.gigasonic.com
contact him at gigasonic1@gmail.com
March 14th, 2006 in
Microphones | tags: audio, diy, electronics, microphone, microphone amp, microphone amplifier, microphone amplifier circuit, microphone amplifier kit, microphone amplifier software, preamp