Itouch Microphone Speaker
Itouch Microphone Speaker
|
|
Peterson 3.5mm - 1/4in iPhone/iTouch Adapter Cable White $12.99 The Peterson iPhone and iTouch Adapter Cable is specifically designed to function with your iPhone or iPod touch (2nd Gen.). This 3.5mm adapter cable connects instruments, microphones, or tuning pickups to its 1/4" plug. Plug the other end of the adapter cable directly into your device using the headphone jack, and you're ready to go. For guitar or bass, plug Peterson's cable directly into your instrument. For tuning or using a wind or brass instrument, plug in an external microphone. This Peterson Adapter Cable can be used with any application requiring an audio input and will not interfere with your charger connector. |
|
|
Peterson 3.5Mm - 1/4In Iphone/Itouch Adapter Cable White $12.99 The Peterson iPhone and iTouch Adapter Cable is specifically designed to function with your iPhone or iPod touch (2nd Gen.). This 3.5mm adapter cable connects instruments, microphones, or tuning pickups to its 1/4" plug. Plug the other end of the adapter cable directly into your device using the headphone jack, and you're ready to go. For guitar or bass, plug Peterson's cable directly into your instrument. For tuning or using a wind or brass instrument, plug in an external microphone. This Peterson Adapter Cable can be used with any application requiring an audio input and will not interfere with your charger connector.Specifically designed to function with your iPhone or iPod touch (2nd Gen.)Connect an instrument, microphone, or tuning pick-up with a 1/4" plug directly into your device using the headphone jackDirectly plug in your guitar or bass for tuning or use an external microphone (required for iPod touch) to tune brass or wind instrumentsCan be used with any application requiring an audio inputWill not interfere with charger connector |
|
|
Olympus Compact Shotgun Microphone $181.99 The Olympus ME-31 shot gun microphone's directional design limits interference from nearby sound sources. This is useful for recording a particular voice or signal that would otherwise be obscured or overpowered by other sources. For example, the ME-31 gun mic can help capture a keynote speaker at a conference without recording a lot of chatter from attendees. |
|
|
Randall Isolation 12 Speaker Cab $399.99 Essential whenever or wherever you're unable to crank full performance volume and tone. The concept is simple. A speaker is mounted in a completely closed, hinged cabinet with a microphone suspended inside. The cab has 1/4" in and outs, as well as a mic out to the mixing console. For recording, Isolation lets you record your amp full out, reflecting your true tone without waking the neighbors or inspiring visits from the cops. 12" Celestion Vintage 30 speaker. 18"W x 18"H x 31-1/2"D.Retractable handleCelestion Vintage 30 - 12" speaker10" gooseneck for mic supportMic not included, condenser mic recommended |
|
|
American Audio Xsp-15A Powered Speaker $399.99 The XSP-15A powered speaker boasts a 15", 2-way active loudspeaker and a 400W biamplifier system encased in a lightweight cabinet. It features a 1.75" compression driver, time-aligned crossover, XLR and RCA balanced inputs, a built-in mixer, and an ABS nylon fiber cabinet with handle and full grill.American Audio designed the XSP-15A speaker for use in both portable and permanently installed systems. The speaker includes a polemount slot and rubber feet on the bottom for portable applications. Rigging points on the top, bottom, and rear are provided and flight installations.15", 2-way powered speaker400W built-in, biamplifier systemNeodymium components1.75" compression driverTime-aligned electronic crossoverBuilt-in mixer with: 1 line input, 1 mic input, treble and bass Control, channel and master volumeBuilt-in RCA inputs1/4" XLR through outputXLR and RCA balanced inputsSeparate Microphone Volume ControlsABS nylon fiber cabinet with handleFlyable or stand-mountableFull grill |
|
|
American Audio Xsp-10A Powered Speaker $199.99 The XSP-10A powered speaker boasts a 10", 2-way active loudspeaker and a 200W biamplifier system encased in a lightweight cabinet. It features a 1" compression driver, time-aligned crossover, XLR and RCA balanced inputs, a built-in mixer, and an ABS nylon fiber cabinet with handle and full grille.American Audio designed the XSP-10A speaker for use in both portable and permanently installed systems. The speaker includes a polemount slot and rubber feet on the bottom for portable applications. Rigging points on the top, bottom, and rear are provided and flight installations.10-inch, 2-way powered speaker200W built-in, biamplifier system1" compression driverTime-aligned electronic crossoverBuilt-in mixer with: 1 line input, 1 mic input, treble and bass Control, channel and master volumeBuilt-in RCA inputs1/4" XLR through outputXLR and RCA balanced inputsSeparate Microphone Volume ControlsABS nylon fiber cabinet with handleFlyable or stand-mountableFull grille |
|
|
American Audio Xsp-12A Powered Speaker $299.99 The XSP-12A powered speaker boasts a 12", 2-way active loudspeaker and a 300W biamplifier system encased in a lightweight cabinet. It features a 1.75" compression driver, time-aligned crossover, XLR and RCA balanced inputs, a built-in mixer, and an ABS nylon fiber cabinet with handle and full grille.American Audio designed the XSP-12A speaker for use in both portable and permanently installed systems. The speaker includes a polemount slot and rubber feet on the bottom for portable applications. Rigging points on the top, bottom, and rear are provided and flight installations.12-inch, 2-way powered speaker300W built-in, biamplifier systemNeodymium components1.75" compression driverTime-aligned electronic crossoverBuilt-in mixer with: 1 line input, 1 mic input, treble and bass Control, channel and master volumeBuilt-in RCA inputs1/4" XLR through outputXLR and RCA balanced inputsSeparate Microphone Volume ControlsABS nylon fiber cabinet with handleFlyable or stand-mountableFull grill |
|
|
On-Stage Stands SSB-6500 Speaker Stand Bag $29.99 This padded speaker stand bag from On-Stage Stands provides ample room for either 2 speaker stands, 6 microphone stands or a load of drum hardware. The heavy duty speaker stand bag features an adjustable shoulder strap with metal clip for fast removal. Also includes hand straps for convenient handling. 2 heavy gauge metal pulls are attached to the zipper, so the stand bag can be zipped at the center or side. All seals are crafted with corded piping that gives the On-Stage Stands SSB-6500 Speaker Stand Bag its rigid shape. |
|
|
On-Stage Stands Ssb-6500 Speaker Stand Bag $24.95 This padded speaker stand bag from On-Stage Stands provides ample room for either 2 speaker stands, 6 microphone stands or a load of drum hardware. The heavy duty speaker stand bag features an adjustable shoulder strap with metal clip for fast removal. Also includes hand straps for convenient handling. 2 heavy gauge metal pulls are attached to the zipper, so the stand bag can be zipped at the center or side. All seals are crafted with corded piping that gives the On-Stage Stands SSB-6500 Speaker Stand Bag its rigid shape. |
|
|
Used Olympus Compact Shotgun Microphone $181.99 The Olympus ME-31 shot gun microphone's directional design limits interference from nearby sound sources. This is useful for recording a particular voice or signal that would otherwise be obscured or overpowered by other sources. For example, the ME-31 gun mic can help capture a keynote speaker at a conference without recording a lot of chatter from attendees.Limited interferenceDurable metal constructionDesktop microphone stand with a removable gripWindscreen is included to reduce wind noise |
|
|
Beyerdynamic Mm 1 Measurement Microphone $199 The Beyerdynamic MM 1 is a measurement microphone designed specifically for measuring sound reinforcement and PA systems. It is designed to work with spectrum analyzers for measuring frequency response and sound pressure levels of loud speaker systems. The MM 1 is the ideal microphone for the measurements of audio signals in the research, development, for reverberation testing and other applications.The MM 1 mic's narrow tubular construction ensures that the microphone has negligible influence on the sound field so that an increase in pressure level is avoided due to the linear frequency response.Requires phantom power.Linear frequency responseOmnidirectional polar patternCalibrated open circuit voltageNarrow tubular construction |
|
|
Audix F5 Instrument Microphone $79.99 The all-purpose Audix f5 Fusion Series dynamic instrument microphone is designed to mic a wide variety of musical instruments, including snare, toms, percussion, guitar and bass cabinets, brass, flute, and woodwinds, as well as vocals and speech. Assembled and tested by Audix in the USA, the f5 is an ideal mic for both stage and studio applications. With a wide frequency response of 55Hz-15kHz, the versatile Audix f5 mic provides clear, accurate, natural sound reproduction without having to rely on EQ. The f5 mic handles sound pressure levels in excess of 137dB without distortion, which lets you mic anything from guitar and bass cabinets to heavy brass with supreme confidence. Sturdy, compact, and easy to position, the f5's roadworthy construction includes a precision-cast zinc-alloy body, black finish, laser etched model number, steel mesh grill, gold XLR connector, and a tension-fit heavy-duty-nylon mic clip.Using in Audix f5:The f5 has a tight (hypercardioid) pick-up pattern in order to help eliminate sound from other instruments on stage from bleeding into the microphone. For this reason, it the f5 is exceptionally effective for drums and percussion in be able to capture the sound of each component of the kit. Snare:Start with the f5 about 2 inches above the head and aimed towards the center of the drum. For more "rim" effect, the f5 can be aimed less towards the center and more towards the rim. It is not uncommon for engineers to place the mic practically right on the drumhead to achieve a very tight, cracking sensation. Toms, congas:Similar to snare. For tighter sound and more attack place, the mic closer to the head. For more decay and overtones pull the mic further away from the head. Guitar cabs:The f5 can be placed within 1-2 inches of the grill cover at a 90 angle pointing directly into the speaker. If the mic is placed closer to the edge of the speaker, you will minimize the higher frequencies and get a warmer, fatter tone. To capture more highs, move the mic closer towards the center of the speaker, but avoid the middle of the speaker.Horns:Place the mic within 1 - 2 inches of the bell, especially when on a stage with drums, bass, guitar, etc. For jazz, classical, and music where the stage volume is lower, the mic can be placed further away for a richer, fuller, sound. Operation:The f5 is a low impedance microphone and should be plugged into a mic-level input on your console, mixer, or recording device. Please note that your microphone does not require phantom power and will not be effected in any way by phantom power should it be running simultaneously when the microphone is in operation. Avoid plugging or unplugging the microphone from the PA system unless the channel is muted or the volume of the system turned down. Failure to do so may result in a loud popping noise, which could seriously damage the speakers in the PA system. Hypercardioid pickup pattern for isolation and feedback controlLow-mass diaphragm for clear, natural, ac |
|
|
Peavey Msdi Microphone Simulated Direct Interface $149.99 The Peavey MSDI Microphone Simulated Direct Interface offers the ease and clarity of a direct signal to you console with the added bonus of sounding as though you miked the amp. The MSDI is a specially voiced direct interface used to connect guitar amplifiers to PA or recording mic inputs. A 1/4" jack is used to interface your amp's speaker output and speaker OR your amp's line out/send to the MSDI output. The MSDI features 100% passive circuitry, which means no clipping and no power supply required. Other features include speaker/load input, tone selector, output level control, and transformer-balanced XLR microphone simulated output with ground lift. DI with speaker simulationSpeaker/load input3-way tone selectorTransformer-balanced XLR output ground lift Output level controlPassive circuitry |
 |
 IK Multimedia iRig Guitar Bass Adapter | iRig Mic BUNDLE  US $109.99
|
 MINI Pocket Microphone Karaoke Player Home KTV Works with Iphone ipad MP3 MP4 PC US $20.98
|
 IK Multimedia iKLIP MINI Universal MIC Microphone STAND ADAPTER US $39.99
|
 Blue Microphones Mikey 20 iPod Recording Microphone MIKEY 20 US $59.99
|
 IK Multimedia iRig Guitar Bass Adapter | iKlip MINI Stand Mount BUNDLE US $89.99
|
 IK Multimedia iRig Guitar Bass Adapter | iRig Mic | iKlip Stand Mount BUNDLE US $149.99
|
 IK Multimedia iRig Guitar Bass Adapter | iKlip Stand Mount BUNDLE US $89.99
|
 DJ Tech iCube 50 Public Address System 50 W Amplifier 5 Woofer US $180.47
|
 IK Multimedia iRig Guitar Bass Adapter | iKlip STUDIO Stand BUNDLE US $89.99
|
 IK Multimedia iRig iMic Microphone US $59.99
|
 Colorful Microphone Karaoke Player Home KTV Works with I phone ipad MP3 MP4 PC US $22.95
|
 |
Black Mini Microphone for iPhone 3G 3GS iPod touch 1st 2nd 3rd Gen classic Video List Price: $7.99 Sale Price: $0.01 Used From: $0.01  |
|
Specifications: Simply attach the Mini Microphone to the earphone socket on iPod nano 4G or 120GB iPod classic, it'll unlock the voice recording software already installed on the device. * When using it on iPod touch 2G, iPhone 3G, you need to download and install recording software such as iTalk Recorder or Easy Recorder etc... |
 |
NEEWER® Mini Microphone Recorder For iPod Touch 3rd Generation Sale Price: $0.01 |
|
Mini Microphone Recorder For iPod Touch 3rd Generation |
 |
Mini Microphone for iPhone 3G/iPod/touch/classic List Price: $23.39 Sale Price: $0.01 Used From: $0.01 |
|
Price is for Piece. Whether conducting an interview, taking lecture notes, or capturing the sounds of life happening around you, simply attach Mini Microphone to your iPod or iPhone for immediate voice recording capabilities... |
 |
DigitalsOnDemand 15-Item Accessory Bundle for New Apple iPod Touch iTouch 4G 4th Gen Generation 8GB 32GB 64GB List Price: $79.99 Sale Price: $22.99 |
|
Includes: Black Tire Vein Design Silicone Skin, White Rubber TPU case with Elastic Armband, Transparent Clear Snap On Crystal Hard Cover Case, DigitalsOnDemand Black Leather Flip Premium Case, Clear Reusable LCD Screen Protector, In-Ear Sound Isolating Earbud Headphones Hands-free Headset with Mic (White), Earphone Splitter, Car Audio 3... |
 |
Apple iPhone iPhone 3G iPhone 3GS iPhone 3GS iPhone 3G iPhone Stereo Headset Extended Adapter 3.5mm - Black List Price: $9.99 Sale Price: $1.19 |
|
This Stereo Headset Extended Adapter 3.5mm - Black to 3.5mm Audio Jack Adapter / Speaker Adaptor is for you to use to convert an Apple jack opening into a standard 3.5mm jack opening to enable use of all headsets with standard 3... |
 |
GOgroove FlexSMART Sp Advanced Car Mount System with NEW Signal Intensifying FM Transmitter and USB Charging Port - Works For Apple iPhone 3 , 3GS , 4 , 4S / iPod Touch , Classic List Price: $59.99 Sale Price: $29.99 |
|
GOgroove FlexSMART SP Advanced FM TransmitterThe In-Car Solution to Play, Charge, and Mount your iPhone or iPodIntroducing the latest 2012 addition to the GOgroove FlexSMART line-up from Accessory Power, the FlexSMART SP is your complete in-car solution for mounting, charging and streaming your music to your car speakers... |
 |
Smile Case Hello Kitty Pink Leopard Cheetah Rhinestone Crystal Jeweled Snap on Full Cover Case for iPod Touch 4 4G iTouch (it4-Leopard) Sale Price: $12.95 |
 |
IK Multimedia AmpliTube iRig List Price: $39.99 Sale Price: Too low to display Used From: $8.99 |
|
AmpliTube iRig is a combination of an easy-to-use instrument interface adapter for iPhone, iPod Touch and iPad mobile devices, and the new AmpliTube for iPhone software for guitar & bass. Simply plug the iRig interface into your iPhone, iPod Touch or iPad, plug your instrument into the appropriate input jack, plug in your headphones, amp or powered speakers, download AmpliTube FREE for iPhone, and start rocking! You'll have at your fingertips the sound and control of three simultaneous stompbox effects + amplifier + cabinet + microphone just like a traditional guitar or bass stage rig! Add amps and effects as you need them you can expand your rig with up to 10 stomps, 5 amps, 5 cabinets and 2 microphones in the AmpliTube iRig app custom shop! |
 |
BlueRigger 3.5mm Male to Male Stereo Audio Cable (4 Feet) - Supports iPhone, iPod, iPad, Kindle Fire, Android and other Smartphones Sale Price: $4.49 |
|
The Bluerigger 3.5mm Stereo Audio Cable is ideal for connecting iPods, iPhones, Media Players to your car stereo or portable speakers via the aux input (3.5mm jack). 3.5mm Stereo Audio Cable and its uses - Provides a Direct Wired Connection - a perfect solution to connect high performance systems that deliver music with full fidelity free of static and FM interference - Specifically designed to take advantage of the convenient 3... |
different parts of itouch second gen?
hey, i have a second gen itouch. the one without speakers that's skinny.
i was wondering what the different parts are?
on the top of the itouch on the front, there's a little dot, darker than the rest, slightly darker. anyone have a clue? it looks a little like the new mac's microphone. also, on the top of the back, there's a black squareish thing on the left side. what's that?
thanks yall!
The 2nd gen touch is skinny and has a speaker.
The 1st gen touch is fatter and does not have a speaker.
The little dot is the light sensor which adjust the screen brightness when set on Auto.
The little black square is for the wifi antenna.
August 27th, 2008 in
Microphones | tags: cables, electronics, hardware, itouch microphone speaker, shopping, video