Clip Large Diaphram
Clip Large Diaphram
 |
 Microphone SHOCKMOUNT Holder for Large Diaphram Condenser Mic Clip Shock Mount  US $15.95
|
 Microphone SHOCKMOUNT Holder for 150 19 Mic Clip Shock Mount US $18.88
|
 Marshall MXL V12 large diaphram condenser Siicon Valve mic w Tube sound US $449.99
|
 CAD Pro 4 Drum Mic Pack US $99.99
|
 1xMicrophone SHOCKMOUNT Holder for Large Diaphram Condenser Mic Clip Shock Mount US $25.00
|
 SHURE SM81 Small Diaphram Pencil Condenser Microphone US $275.00
|
 Sennheiser EW500 965 G3 Wireless Microphone System with e965 B 626 668 MHZ US $1,429.95
|
 Sennheiser EW500 965 G3 Wireless Microphone System with e965 A 516 558 MHZ NEW US $1,429.95
|
 CAD GXL2200BPSP Studio Pack US $181.99
|
 Sennheiser ew 500 965 G3 Handheld Wireless System CH B US $1,301.25
|
 CAD GXL3000 Studio Pack US $249.99
|
 CAD GXL2200 Studio Pack US $199.99
|
 Sennheiser SKM 500 965 G3 Wireless Transmitter CH A US $979.95
|
 Sennheiser SKM 500 965 G3 Wireless Transmitter CH G US $979.95
|
 Post Audio C41 Large Diaphragm Compact Body Studio Condenser Mic XLNT Vocal Mic US $69.00
|
 CAD GXL3000BPSP Studio Pack US $249.99
|
 Sennheiser SKM 500 965 G3 Wireless Transmitter CH B US $979.95
|
 Sennheiser ew 500 965 G3 Handheld Wireless System CH A US $1,429.95
|
 GREAT NEW CAD MODEL GXL2200BPSP BLACK PEARL STUDIO MICROPHONE PACK SHIPS FREE US $199.99
|
|
|
Heil Sound PR 35S Large-Diaphram Dynamic Hand-Held Microphone with 3-Position Roll-Off Switch $274 The Heil Sound PR 35S has been designed for recording, live sound reinforcement, and commercial broadcast applications that require a smooth, flat response over a wide frequency range. The PR 35 was designed around the acclaimed PR 30 element and incorporates a sorbothane shock mount to give the best possible results.The PR 35 achieves its exceptional performance by using a special magnet structure and a large aluminum 1-1/2" low-mass voice coil assembly. A carefully wound and placed hum bucking coil allows the PR 35 to be used close to video monitors without unwanted hum or buzz. Special attention has been paid to the phasing plug assembly with equally placed ports that sense audio from behind the source. It then enters them out of phase thus producing a very linear cardioid pattern. This reduces the proximity effect while achieving the extreme articulation across its smooth 40Hz-18 kHz frequency response. The new Heil element can be used in extreme high sound pressure levels and is immune to overload conditions. It produces a beautifully smooth audio response without the inconvenience of phantom or outside DC powering.The PR 35 is equipped with a three-position roll-off switch. The first position is flat, the second position rolls off at approximately -3dB and the last position rolls off at approximately -6dB. The cardioid pattern offers the greatest rejection of unwanted audio at 180 degrees off axis, which is directly behind the microphone; there is virtually no off-axis coloration.Supplied with a microphone clip that mounts to any 5/8"- 27 mic thread. It also comes with a leatherette carrying case. |
|
|
Heil Sound Pr 35S Large-Diaphram Dynamic Hand-Held Microphone With 3-Position Roll-Off Switch $274 The Heil Sound PR 35S has been designed for recording, live sound reinforcement, and commercial broadcast applications that require a smooth, flat response over a wide frequency range. The PR 35 was designed around the acclaimed PR 30 element and incorporates a sorbothane shock mount to give the best possible results.The PR 35 achieves its exceptional performance by using a special magnet structure and a large aluminum 1-1/2" low-mass voice coil assembly. A carefully wound and placed hum bucking coil allows the PR 35 to be used close to video monitors without unwanted hum or buzz. Special attention has been paid to the phasing plug assembly with equally placed ports that sense audio from behind the source. It then enters them out of phase thus producing a very linear cardioid pattern. This reduces the proximity effect while achieving the extreme articulation across its smooth 40Hz-18 kHz frequency response. The new Heil element can be used in extreme high sound pressure levels and is immune to overload conditions. It produces a beautifully smooth audio response without the inconvenience of phantom or outside DC powering.The PR 35 is equipped with a three-position roll-off switch. The first position is flat, the second position rolls off at approximately -3dB and the last position rolls off at approximately -6dB. The cardioid pattern offers the greatest rejection of unwanted audio at 180 degrees off axis, which is directly behind the microphone; there is virtually no off-axis coloration.Supplied with a microphone clip that mounts to any 5/8"- 27 mic thread. It also comes with a leatherette carrying case.Largest dynamic element in a handheld microphoneWide frequency responseArticulate, natural midrangeHeil's most versatile hand-held microphoneThree-position roll off switchRubberized coating |
|
|
CAD Equitek E100S Large Diaphram Condenser Mic $536.99 Engineered and built in the USA, the CAD Equitek E100S large diaphragm supercardioid condenser microphone has an extremely low noise floor for its class (3.7 dBA) and the smooth, vintage tone and robust low end CAD is known for. The bootstrapped, full-differential Quadra-FET front end delivers high sensitivity and low distortion, plus CAD's proprietary circuitry ensures the highest performance. The CAD microphone's nickel-plated 1" capsule delivers accurate phasing on instruments, and a full rich vocal tone, accentuated by the extended low-frequency response. Features include an 80Hz high-pass filter and a 10dB pad. From vocals to percussion, acoustic instruments and everything in between, the CAD Equitek E100S condenser mic will prove to be one of the most versatile tools in your microphone locker, in the studio, or onstage. The CAD Equitek E100S condenser microphone comes in a vintage woodgrain cherry case and has a stealth shockmount included. 48V Phantom power is required. |
|
|
Cad Equitek E100s Large Diaphram Condenser Microphone $499.99 Engineered and built in the USA, the CAD Equitek E100S large diaphragm supercardioid condenser microphone has an extremely low noise floor for its class (3.7 dBA) and the smooth, vintage tone and robust low end CAD is known for. The bootstrapped, full-differential Quadra-FET front end delivers high sensitivity and low distortion, plus CAD's proprietary circuitry ensures the highest performance. The CAD microphone's nickel-plated 1" capsule delivers accurate phasing on instruments, and a full rich vocal tone, accentuated by the extended low-frequency response. Features include an 80Hz high-pass filter and a 10dB pad. From vocals to percussion, acoustic instruments and everything in between, the CAD Equitek E100S condenser mic will prove to be one of the most versatile tools in your microphone locker, in the studio, or onstage. The CAD Equitek E100S condenser microphone comes in a vintage woodgrain cherry case and has a stealth shockmount included. 48V Phantom power is required.Large diaphragm supercardioid condenser micLow noise floorFull-differential Quadra-FET front-endNickel-plated 1" capsuleExtended low frequency response80Hz high-pass filter10dB padComes in a vintage woodgrain cherry case with shockmountMade in the USAApplications:Studio vocals, Choir, Acoustic instrument, Guitar cabinets, Bass cabinets, Strings, Piano, Cymbals/Overheads |
|
|
Used Cad Equitek E100s Large Diaphram Condenser Microphone $454.99 Engineered and built in the USA, the CAD Equitek E100S large diaphragm supercardioid condenser microphone has an extremely low noise floor for its class (3.7 dBA) and the smooth, vintage tone and robust low end CAD is known for. The bootstrapped, full-differential Quadra-FET front end delivers high sensitivity and low distortion, plus CAD's proprietary circuitry ensures the highest performance. The CAD microphone's nickel-plated 1" capsule delivers accurate phasing on instruments, and a full rich vocal tone, accentuated by the extended low-frequency response. Features include an 80Hz high-pass filter and a 10dB pad. From vocals to percussion, acoustic instruments and everything in between, the CAD Equitek E100S condenser mic will prove to be one of the most versatile tools in your microphone locker, in the studio, or onstage. The CAD Equitek E100S condenser microphone comes in a vintage woodgrain cherry case and has a stealth shockmount included. 48V Phantom power is required.Large diaphragm supercardioid condenser micLow noise floorFull-differential Quadra-FET front-endNickel-plated 1" capsuleExtended low frequency response80Hz high-pass filter10dB padComes in a vintage woodgrain cherry case with shockmountMade in the USAApplications:Studio vocals, Choir, Acoustic instrument, Guitar cabinets, Bass cabinets, Strings, Piano, Cymbals/Overheads |
|
|
Monarch Pencil Clip Manhasset $1.09 The Monarch Music Stand Pencil Clips are a must have accessory for any musician and rehearsal hall. The Monarch Music Stand Pencil Clips are molded from durable plastic and attach to the shaft of the music stand so you will always have a pencil at hand. These clips are available in two versions Clip 1 fits all Manhasset music stands plus the Hamilton KB95E Encore Series and KB50 Traveler Stand Clip 2 fits the Hamilton KB1D Gripper, KB1E Automatic and KB1F Trigger Stands plus the Wenger Classic 50 Small, Bravo Large or the Roughneck Large music stands. Each clip holds 2 pencils. The Monarch Music Stand Pencil Clips are available in black only. |
|
|
Intellitouch PT20 Clip On Tuner Black $29.95 The Intellitouch PT20 Clip On Tuner is the latest in vibration-based tuning.It's automatic, chromatic, and displays the measured pitch on a large, backlit display for easy tuning. The PT20 tuner ignores background noise - it feels the instrument's vibration instead of using sound. Works on electric and acoustic guitars, basses, violins, banjos, mandolins and more. |
|
|
On-Stage Stands Grip Clip Black $3.99 Winner of a "Best in Show" at Summer NAMM 2009, the Grip Clip prevents the inadvertent unplugging of guitars, basses, and other strap-worn instruments. By clipping high upon any size strap behind the player's back, the On-Stage Stands Grip Clip allows you to create a wide, gentle loop (make it as small or large as you want which reduces stress on both the strap and input jack while simultaneously reducing and protecting against the likelihood of a stepped on or snagged cable, and even kinking. The cable itself is attached to the cable clip via a snap-in channel sized to accommodate all popular instrument cables. It also acts as a breakaway cable so you don't have to worry about yanking your cable out of your instrument during intense performances.The On-Stage Stands Grip Clip is an exciting product designed for guitar players by guitar players, and fits seamlessly into any player's routine. |
|
|
Monarch Pencil Clip Hamilton/Wenger $1.09 The Monarch Music Stand Pencil Clips are a must have accessory for any musician and rehearsal hall. The Monarch Music Stand Pencil Clips are molded from durable plastic and attach to the shaft of the music stand so you will always have a pencil at hand. These clips are available in two versions Clip 1 fits all Manhasset music stands plus the Hamilton KB95E Encore Series and KB50 Traveler Stand Clip 2 fits the Hamilton KB1D Gripper, KB1E Automatic and KB1F Trigger Stands plus the Wenger Classic 50 Small, Bravo Large or the Roughneck Large music stands. Each clip holds 2 pencils. The Monarch Music Stand Pencil Clips are available in black only. |
|
|
Intellitouch PT10 Mini Clip-On Tuner $27.99 The Intellitouch PT10 Mini tuner pushes the boundaries forward for small, compact-sized instrument tuners, while still having a large, easy-to-read backlit display. Ideal for everyone, its ease of use and reliability is what beginners need and what professionals want. The PT10 instrument tuner is quick, accurate, and easy as A-B-C#.It's designed to clip-on and tune electric and acoustic guitars, basses, violins, banjos, mandolins and more without interference from ambient room noise. Best of all, the Intellitouch PT10 clip on tuner actually feels string vibrations instead of relying on sound for more acute tuning. |
|
|
Fishman Ft-1 Digital Clip-On Tuner $24.95 The Fishman FT-1 Digital Tuner is an ideal companion for any acoustic instrument. The clip-on fully chromatic Fishman tuner quickly and accurately finds the note being played and indicates if you're in tune, sharp, or flat. The FT-1 tuner's adjustable clip sensor is easily secured to the instrument and ensures great results, even in noisy environments.The Fishman FT-1 tuner's bright, backlit LCD display is equipped with a meter-style pitch indicator with a large readout that turns from red to green when the note is in tune. Powered by a single coin battery, Fishman FT-1 clip-on digital tuner is lightweight and packed with value.Fully chromatic: automatically displays the noteAdjustable clip attaches to flat surfacesSwivel mount rotates for easy viewingExtra-bright LCD display lights green when in tune and lights red for sharp or flatMeter-style sharp and flat displayBuilt-in microphoneClip-on sensor for tuning in noisy environmentsInstrument modes display the string number for correctly tuning guitar, bass, or ukuleleAdjustable reference pitch from 435Hz to 445Hz'Flat' mode for easily transposed tuningAutomatic power save and shut-off features save battery powerIncludes one 2032 coin batteryDimensions: 1.87" H x 1.85" W x 1.61" DWeight: 1.9 oz. |
|
|
Intellitouch Pt20 Clip On Tuner Black $29.95 The Intellitouch PT20 Clip On Tuner is the latest in vibration-based tuning.It's automatic, chromatic, and displays the measured pitch on a large, backlit display for easy tuning. The PT20 tuner ignores background noise - it feels the instrument's vibration instead of using sound. Works on electric and acoustic guitars, basses, violins, banjos, mandolins and more.Clips onArrow displayMulticolor backlightStrong clampA-Ref adjustment 430Hz-450HzLifetime Warranty |
|
|
Intellitouch Pt10 Mini Clip-On Tuner $29.95 The Intellitouch PT10 Mini tuner pushes the boundaries forward for small, compact-sized instrument tuners, while still having a large, easy-to-read backlit display. Ideal for everyone, its ease of use and reliability is what beginners need and what professionals want. The PT10 instrument tuner is quick, accurate, and easy as A-B-C#.It's designed to clip-on and tune electric and acoustic guitars, basses, violins, banjos, mandolins and more without interference from ambient room noise. Best of all, the Intellitouch PT10 clip on tuner actually feels string vibrations instead of relying on sound for more acute tuning.Small, compact sizeOne-handed swivel clampTunes in noisy environmentsLarge, easy-to-read needle displayLightweightLCD screenColor-changing backlight (red means out of tune and green means in tune)Calibration from 430Hz to 450HzElegantly simple controlsLimited Lifetime Manufacturer WarrantyDimensions: 2"W x 3.4"H x 1"D (without clip)Weight: 2 oz. |
 |
AXL SC-120 Large Diaphragm Clip List Price: $19.99 Sale Price: $11.78  |
|
Microphone Shockmount, Large Diaphragm |
 |
Behringer C-3 Dual-Diaphragm Studio Condenser Microphone List Price: $109.99 Sale Price: $53.99 Used From: $49.49 |
|
The C-3 is a home recording enthusiast's dream come true. This professional-quality condenser microphone is designed to capture your sounds with incredible realism, sensitivity and accuracy. This professional-quality condenser microphone is designed to capture your sounds with incredible realism, sensitivity and accuracy... |
 |
MXL 67i Dual Diaphragm Condenser Microphone List Price: $379.95 Sale Price: $169.00 Used From: $140.00 |
|
A large, dual diaphragm version of the renowned V67G microphone. Unique in design with 2 selectable diaphragms the V67i is like having two mics in one - with the front side having a warm, lush sound, and the microphone’s back side simulating some of the brighter more airy sounding vintage capsule characteristics of early tube mics of the 60s... |