Car Microphone
Car Microphone
 |
 DAOTIANFU Multimedia Microphone MIC 35mm Stereo Plug  US $9.77
|
 New Adjustable Desk Microphone MIC Stand Holder Black High Quality US $23.97
|
 New Adjustable Desk Tripod Mic Microphone Clip Holder Stand High Quality US $14.97
|
 New Adjustable Desk Talbe Microphone Mic Clip Stand Holder High Quality US $17.97
|
 Microphone Windshield Cover Audio Mic Shield BLUE 2PC US $.99
|
 New Studio Microphone Mic Wind Screen Pop Shield Filter US $7.99
|
 6 Studio Mic microphone Wind Screen pop filter SHIELD US $6.99
|
 NEW 2PCS Blue Microphone Foam Cover Mic Wind Screen US $.98
|
 2 x windscreen foam Audio Mic Shield microphone Cover US $.99
|
 Black Plastic Stage Microphone MIC Clip Stand Holder US $.99
|
 Black Conference KTV Sound Microphone Clip Stand Holder US $.99
|
 NEW PYLE PRO Dynamic Karaoke Microphone Vocal DJ Mic NR US $28.95
|
 Sony cardioid microphone F 98 with case stand and instructions needs wire fix US $7.99
|
 2 Set Blue Microphone Grill Foam Cover Audio Mic Shield High Quality US $2.59
|
 New Wireless Tie clip Microphone Cordless Mic Receiver High Quality US $13.99
|
 2 Red Microphone Grill Foam Cover Audio Mic Shield Soft High Quality US $2.99
|
 New PylePro PWMA100 Rechargeable Portable PA System with Wireless MIC US $84.40
|
 Nady Pro DKW DUO Dual VHF Wireless Microphone System 300 Foot Range DKWDUO US $58.95
|
 Pyle Pro PDWM4400 VHF Rack Mount 4 Mic Wireless System US $141.95
|
 New Pyle Pro PDWM7300 Rack Mount 4 Mic UHF Wireless Microphone System US $238.95
|
 NEW Pyle PLM3 Wired 35mm to 1 4 Uni Directional Mic US $21.95
|
 NEW Pyle PMHM2 Head Worn Omni Directional Microphone US $23.95
|
 US SL M5 LABSIC Sound Microphone 20Meters White US $.99
|
 NEW Pyle PLMS30 Wired Lavalier Mini XLR Microphone US $21.95
|
 Pyle Pro PDWM8400 8 Mic Handheld VHF Wireless System US $225.95
|
 VOCOPRO UHF 5800 4 WIRELESS KARAOKE MICROPHONE SYSTEM US $309.95
|
 ACOS CRYSTAL LAPEL MICROPHONE STILL NEW IN BOX 1950s COSMOCORD LTD ENGLAND US $50.00
|
 ev cobalt co9 professional microphone new premium vocal microphone US $49.99
|
 NEW PYLE PRO AUDIO 2 MICROPHONE MIC VHF WIRELESS SYSTEM US $68.95
|
 New Studio Microphone Mic Wind Screen Pop Filter Shield free shipping US $15.99
|
 Wireless Microphone Lapel Mic System Belt Pack Clip TM free shipping US $13.99
|
 2 Red Microphone Grill Foam Cover Audio Mic Shield Soft free shipping US $2.99
|
 New Wireless Tie clip Microphone Cordless Mic Receiver free shipping US $13.99
|
 Wireless Karaoke Microphone For PS2 PS3 Wii XBOX360 US $25.99
|
 37 Ft New 3Pin male to female XLR Microphone Mic Cable Free Delivery US $5.99
|
 New Studio Microphone Mic Wind Screen Pop Filter Shield Free Delivery US $15.99
|
 Logicom TX 20 FM Transmitter Microphone 216MHz RX20 US $49.95
|
 PylePro PWMA100 Rechargeable Portable PA System with Wireless MIC US $82.94
|
 Micophone foam wind damping tie clipmini lapel mic hands free filter 4 PCS US $8.00
|
 Custom Metal Microphone Stand US $349.99
|
 Shure Dual UHF Wireless Microphone System PG288 PG58 US $499.88
|
 MXL MPAC 01 High End Professional Studio Mic Pre Amp Compressor US $300.00
|
 RECHARGEABLE PORTABLE PA SYSTEM WITH WIRELESS MIC US $67.94
|
 FEN TONE HAND DESK MICROPHONE STAND MODEL FHM 200 VINTAGE FEN TONE US $20.00
|
 NEW Pyle PDWM2100 Professional Dual VHF Wireless Handheld Microphone System US $37.59
|
 37 Ft New 3Pin male to female XLR Microphone Mic Cable Free Shipment US $5.99
|
 Wireless FM Transmit Receiver Clip On Mini Microphone US $12.99
|
 4 in 1 Wireless Karaoke Microphone For Wii PS3 XBOX 360 US $24.16
|
 Blue Microphones Yeti USB Condenser Plug Play KIT NEW US $139.95
|
 Shure Dual UHF Wireless Microphone System PG288 PG58 US $499.98
|
|
|
D.W. Fearn Vt-1 Single Channel Vacuum Tube Microphone Preamp $2400 Microphone preamplifiers from D.W. Fearn's VT-series will change the way you think of audio quality. The transparency is astounding. Vocals sound smoother, warmer, more intimate, with a compelling presence. Any microphone and any sound will benefit from the improved clarity, definition, and lack of solid-state artifacts. The VT-1 from tube guru D.W. Fearn recreates the sound of classic tube preamps of the 1960s. Modern components and computer-optimized circuitry, unavailable during the vacuum tube era, elevate this design to a new level of performance. The VT-1 preamplifier was designed for optimal sonic quality, reliability, and durability. Like the best tube equipment of the 1950s and '60s, the VT-1 is built on a heavy-gauge aluminum chassis, utilizing point-to-point wiring. Each vacuum tube is selected for minimum noise and microphonics, and maximum sound clarity. The front panel switches control sealed, gold-contact precision relays for all audio switching, eliminating the possibility of dirty contacts degrading the sound and minimizing the internal audio path. Four class-A triode amplifier sections (in two tubes) in each channel comprise the entire active circuit. This surprisingly simple circuit, along with top-quality components and careful design optimization, results in the sonic superiority that the VT-1 has become known for. All over the globe, VT-1 mic preamps are in daily use in the world's best studios, as well as in home project studios, helping many top recording artists achieve the best possible sound. Important Note: Due to heat given off by tubes, D.W. Fearn recommends that you provide at least one rack unit (RU) of space above and below their audio rack products. For proper cooling and a refined look for your rack, we highly recommend using D.W. Fearn Vented Rack Panels (#180296). Dual-channel version D.W. Fearn VT-2 also available (see #180272). History of the VT-1 and VT-2 Vacuum Tube Microphone Preamplifiers One day in 1991, I was going through some old masters in a closet at home and came across a reel from 1968. It was one of the first studio recordings I ever made. I pulled the tape box off the shelf and thought about those days. Although I suspected that the recording might be a bit crude, I remembered that the music was pretty good, so I made a cassette to listen to in the car. I kept forgetting to put the cassette in my pocket for a few days, but finally I remembered to take it. That old recording brought back memories of my first studio and how primitive a setup it was. But listening to that tape was a revelation; some of the sounds were really nice. The vocals were full and warm but still punched through. Acoustic guitars had a depth I don't often hear in current recordings. And the sax solo wow! It ripped through with a grossly distorted but beautifully powerful sound. That recording was done on a 4-track Scully 280 and mixed to a 2-track Scully. My prize microphone was a Neumann U-87 and that' |
|
|
D.W. Fearn Vt-2 Dual Channel Vacuum Tube Microphone Preamplifier $3900 The VT-series microphone preamplifiers from D.W. Fearn will change the way you think of audio quality. The transparency is astounding. Vocals sound smoother, warmer, more intimate, with a compelling presence. Any microphone and any sound will benefit from the improved clarity, definition, and lack of solid-state artifacts. The VT-2 preamplifier recreates the sound of classic tube preamps of the 1960s. Modern components and computer-optimized circuitry, unavailable during the vacuum tube era, elevate this design to a new level of performance. The VT-2 mic preamp was designed for optimal sonic quality, reliability, and durability. Like the best tube equipment of the 1950s and '60s, the VT-2 is built on a heavy-guage aluminum chassis, utilizing point-to-point wiring. Each vacuum tube is selected for minimum noise and microphonics, and maximum sonic clarity. The front panel switches control sealed, gold-contact precision relays for all audio switching, eliminating the possibility of dirty contacts degrading the sound and minimizing the internal audio path. Four class-A triode amplifier sections (in two tubes) in each channel comprise the entire active circuit. This surprisingly simple circuit, along with top-quality components and careful design optimization, results in the sonic superiority that the VT-2 has become known for. All over the globe, VT-2 preamps are in daily use in the world's best studios, as well as in home project studios, helping many top recording artists achieve the best possible sound. Important Note: Due to heat given off by tubes, D.W. Fearn recommends that you provide at least one rack unit (RU) of space above and below their audio rack products. For proper cooling and a refined look for your rack, we highly recommend using D.W. Fearn Vented Rack Panels (#180296). Single-channel version D.W. Fearn VT-1 also available (see #180271). History of the VT-1 and VT-2 Vacuum Tube Microphone Preamplifiers One day in 1991 I was going through some old masters in a closet at home and came across a reel from 1968. It was one of the first studio recordings I ever made. I pulled the tape box off the shelf and thought about those days. Although I suspected that the recording might be a bit crude, I remembered that the music was pretty good, so I made a cassette to listen to in the car. I kept forgetting to put the cassette in my pocket for a few days, but finally I remembered to take it. That old recording brought back memories of my first studio and how primitive a setup it was. But listening to that tape was a revelation; some of the sounds were really nice. The vocals were full and warm but still punched through. Acoustic guitars had a depth I don't often hear in current recordings. And the sax solo wow! It ripped through with a grossly distorted but beautifully powerful sound. That recording was done on a 4-track Scully 280 and mixed to a 2-track Scully. My prize microphone was a Neumann U-87 and that's what was probabl |
|
|
D.W. Fearn VT-1 Single Channel Vacuum Tube Microphone Preamp $2400 Microphone preamplifiers from D.W. Fearn's VT-series will change the way you think of audio quality. The transparency is astounding. Vocals sound smoother, warmer, more intimate, with a compelling presence. Any microphone and any sound will benefit from the improved clarity, definition, and lack of solid-state artifacts. The VT-1 from tube guru D.W. Fearn recreates the sound of classic tube preamps of the 1960s. Modern components and computer-optimized circuitry, unavailable during the vacuum tube era, elevate this design to a new level of performance. The VT-1 preamplifier was designed for optimal sonic quality, reliability, and durability. Like the best tube equipment of the 1950s and '60s, the VT-1 is built on a heavy-gauge aluminum chassis, utilizing point-to-point wiring. Each vacuum tube is selected for minimum noise and microphonics, and maximum sound clarity. The front panel switches control sealed, gold-contact precision relays for all audio switching, eliminating the possibility of dirty contacts degrading the sound and minimizing the internal audio path. Four class-A triode amplifier sections (in two tubes) in each channel comprise the entire active circuit. This surprisingly simple circuit, along with top-quality components and careful design optimization, results in the sonic superiority that the VT-1 has become known for. All over the globe, VT-1 mic preamps are in daily use in the world's best studios, as well as in home project studios, helping many top recording artists achieve the best possible sound. Important Note: Due to heat given off by tubes, D.W. Fearn recommends that you provide at least one rack unit (RU) of space above and below their audio rack products. For proper cooling and a refined look for your rack, we highly recommend using D.W. Fearn Vented Rack Panels (#180296). Dual-channel version D.W. Fearn VT-2 also available (see #180272). History of the VT-1 and VT-2 Vacuum Tube Microphone Preamplifiers One day in 1991, I was going through some old masters in a closet at home and came across a reel from 1968. It was one of the first studio recordings I ever made. I pulled the tape box off the shelf and thought about those days. Although I suspected that the recording might be a bit crude, I remembered that the music was pretty good, so I made a cassette to listen to in the car. I kept forgetting to put the cassette in my pocket for a few days, but finally I remembered to take it. That old recording brought back memories of my first studio and how primitive a setup it was. But listening to that tape was a revelation; some of the sounds were really nice. The vocals were full and warm but still punched through. Acoustic guitars had a depth I don't often hear in current recordings. And the sax solo wow! It ripped through with a grossly distorted but beautifully |
|
|
D.W. Fearn VT-2 Dual Channel Vacuum Tube Microphone Preamplifier $3900 The VT-series microphone preamplifiers from D.W. Fearn will change the way you think of audio quality. The transparency is astounding. Vocals sound smoother, warmer, more intimate, with a compelling presence. Any microphone and any sound will benefit from the improved clarity, definition, and lack of solid-state artifacts. The VT-2 preamplifier recreates the sound of classic tube preamps of the 1960s. Modern components and computer-optimized circuitry, unavailable during the vacuum tube era, elevate this design to a new level of performance. The VT-2 mic preamp was designed for optimal sonic quality, reliability, and durability. Like the best tube equipment of the 1950s and '60s, the VT-2 is built on a heavy-guage aluminum chassis, utilizing point-to-point wiring. Each vacuum tube is selected for minimum noise and microphonics, and maximum sonic clarity. The front panel switches control sealed, gold-contact precision relays for all audio switching, eliminating the possibility of dirty contacts degrading the sound and minimizing the internal audio path. Four class-A triode amplifier sections (in two tubes) in each channel comprise the entire active circuit. This surprisingly simple circuit, along with top-quality components and careful design optimization, results in the sonic superiority that the VT-2 has become known for. All over the globe, VT-2 preamps are in daily use in the world's best studios, as well as in home project studios, helping many top recording artists achieve the best possible sound. Important Note: Due to heat given off by tubes, D.W. Fearn recommends that you provide at least one rack unit (RU) of space above and below their audio rack products. For proper cooling and a refined look for your rack, we highly recommend using D.W. Fearn Vented Rack Panels (#180296). Single-channel version D.W. Fearn VT-1 also available (see #180271). History of the VT-1 and VT-2 Vacuum Tube Microphone Preamplifiers One day in 1991 I was going through some old masters in a closet at home and came across a reel from 1968. It was one of the first studio recordings I ever made. I pulled the tape box off the shelf and thought about those days. Although I suspected that the recording might be a bit crude, I remembered that the music was pretty good, so I made a cassette to listen to in the car. I kept forgetting to put the cassette in my pocket for a few days, but finally I remembered to take it. That old recording brought back memories of my first studio and how primitive a setup it was. But listening to that tape was a revelation; some of the sounds were really nice. The vocals were full and warm but still punched through. Acoustic guitars had a depth I don't often hear in current recordings. And the sax solo wow! It ripped through with a grossly distorted but beautifully powerful sound. |
|
|
Gibraltar Microphone Gooseneck 6 $5.99 This 6" black microphone gooseneck fits standard mic holders and boom arms. |
|
|
Yamaha Mc-7 Instrument Microphone $74.99 The Yamaha MC-7 Instrument Microphone is a condenser mic for the Yamaha Silent Brass system. |
|
|
ProLine Standard Microphone Clip $3.99 Standard Microphone Clip with plastic mic swivel retainer holds your microphone securely. 5/8" female threaded insert in base. Black. |
|
|
Proline Standard Microphone Clip $3.99 Standard Microphone Clip with plastic mic swivel retainer holds your microphone securely. 5/8" female threaded insert in base. Black. |
|
|
K&M Microphone Holder for Drums $24.99 The K&M Microphone Holder for drums is a unique, compact holder for attaching microphones to drum kits. Easy to mount and remove. The microphone holder has rubber inserts that absorb noise and shock. Tightens securely with 5/8" thread. |
|
|
ProLine Universal Microphone Clip $4.99 Powerful spring-loaded universal clamp holds your microphone securely. 5/8" female threaded insert in plastic base. Black. |
|
|
ProLine Rubber Microphone Clip $5.99 Rubber mic swivel retainer holds your microphone securely. 5/8" female threaded insert in base. Black. |
|
|
Proline Universal Microphone Clip $4.99 Powerful spring-loaded universal clamp holds your microphone securely. 5/8" female threaded insert in plastic base. Black. |
|
|
Proline Rubber Microphone Clip $5.99 Rubber mic swivel retainer holds your microphone securely. 5/8" female threaded insert in base. Black. |
|
|
Shure C100j Microphone Cable $39 Shure C100J Microphone Cable is a hi-Flex, 100' cable for low-impedance operation. |
|
|
Shure C50j Microphone Cable $19.99 The Shure C50J microphone cable is 50' (15m) of Hi-Flex cable for low-impedance operation. |
 |
Stereo Headset /w Microphone for Apple iPhone 3G (White) List Price: $9.80 Sale Price: $0.01  |
|
Lightweight and comfortable, this Apple iPhone 3G Hands-Free Stereo Headset enables you to carry on conversations while you continue to do other things including listening to your favorite music. Modeled after the acclaimed new Apple Earphones, the iPhone Stereo Headset provide superior comfort, fit, and sound quality... |
 |
Pioneer Car DVD Nvigtion Bluetooth Microphone Mic Assembly for Ref # CPM1084 CPM1064 New Sale Price: $29.99 |
|
The is an optional external microphone for select Pioneer in-dash headunits with built-in Bluetooth that feature a 2.5mm microphone input. The microphone can also be used with Pioneer's external Bluetooth interface module (BT100 or BT200, sold separately)... |
 |
Panasonic KX-TCA60 Hands-Free Headset with Comfort Fit Headband List Price: $14.95 Sale Price: Too low to display Used From: $100.00 |
|
Designed for use with any cordless phone possessing a standard 2.5 mm jack, Panasonic's KX-TCA60 is an excellent way for you to talk hands-free while you work. Its boom-style microphone adjusts to an optimum level for your mouth... |
 |
GTMax Mini USB Car Charger Vehicle Power Adapter - Black for Apple iPhone 4 4G 16GB / 32GB 4th Generation List Price: $9.99 Sale Price: $0.01 |
|
Universal Mini USB Car Charger Adapter (Black) for you to use with your device.Use your car to charge any devices (digital cameras, PDAs, mobile phones, USB accessories and more) that can rely on USB for power! This adapter plugs into your car's cigarette lighter jack to become a powered USB port... |
 |
GOgroove FlexSMART X2 ADVANCED Wireless In-Car Bluetooth FM Transmitter with Charging, Music Control and Hands-Free Calling for ANDROID, iPhone, Blackberry and Windows Smartphones List Price: $59.95 Sale Price: $49.95 |
|
The GOgroove FlexSMART X2. Play and Charge your Bluetooth Device ON THE GO! Play Music Through Your Car Speakers - Sound quality is SUPERIOR to most any FM Transmitter on the market and now features an enhanced FM Bluetooth Transmitting Chipset with DC Surge Protection... |
 |
JBuds J5 Earbuds-style Metal Headphones for iPod, iPad, Tablet, Kindle (Black Pearl) List Price: $59.95 Sale Price: $29.95 Used From: $24.33 |
|
JLab marks the 5th anniversary of the best-selling JBuds line with the striking new J5. Benefiting from five years of evolution in design, sound quality, durability, and comfort, the J5 earbuds-style headphones represent the most universally appealing JBuds ever... |
|
Kenwood External Bluetooth Microphone Mic Assembly Car DVD Nvigtion, Ref W01171805, W01176815 Sale Price: $29.99 |
|
Xtenzi External Bluetooth Microphone For Kenwood Stereo In dash: ..The is an optional external microphone for select Kenwood in-dash head units with built-in Bluetooth that feature a 3.5mm microphone input... |
 |
JBuds J4 Rugged Metal In-Ear Earbuds Style Headphones with Travel Case (Obsidian Black) List Price: $89.95 Sale Price: $33.25 Used From: $23.50 |
|
JLab seeks to up the game with every new generation of the best-selling JBuds line, and the J4 Rugged Metal Earbuds Style Headphones are no exception. Building on the sleek style, premium sound, and maximum comfort of the bestselling JBuds J3 earbuds, we gave the new JBuds J4's a flexible exoskeleton armor over all components for extreme durability and a hot new rugged look... |
 |
JBuds Hi-Fi Noise-Reducing Ear Buds (Black) List Price: $49.95 Sale Price: $9.95 |
|
JBuds are the perfect companion for your iPod, mp3 player, laptop, portable DVD, MD, radio, or other audio devices, combining sleek design, premium sound quality, noise reduction, and maximum comfort. The soft silicone earbuds fit perfectly inside your ears, allowing you to comfortably enjoy your music non-stop while blocking outside noise... |
 |
SainSpeed F198 Car Dash DVR With Night Vision, Microphone Built In, 2.5" Rotatable and Foldable TFT LCD Screen display List Price: $79.99 Sale Price: $26.99 |
|
Selectable Recording Resolution:WXGA:1280 * 720 PIXELS, 30FPS,WvGA: 848 *480 PIXELS, 30 FPS,VGA: 640 *480 PIXELS, 30 FPS Recording automatically after the power up High speed recording and quick light responding Support covered recording |
can you use a standard "Y" headphone splitter on an ipod touch to add a microphone?
Im wanting voice command function for my ipod while i drive. Is it possible to connect a mini microphone and an 1/8 to 1/8 cable to my car's input jack using a standard "Y" headphone splitter?
Search google for
DLO headphone splitter, it supports the mic/remote because it has a 3 ring output
September 4th, 2011 in
Microphones | tags: audio, bluetooth, car, car microphone, car microphone 3.5mm, car microphone amplifier, car microphone placement, car microphone powered, headset, microphone