Audio Speaker Pro

Audio Speaker Pro

Check out this page if you are looking for Audio Speaker Pro

Eminence Alpha-8Mra 8 Pro Audio Speaker $49.99 The Eminence Alpha-8MRA 8" Pro Audio Speaker incorporates the use of a closed-back chassis and does not require a tuned enclosure to enhance performance.Power Rating: 125WFrequency Response: 65Hz-5kHzClosed back chassisDoes not require a tuned enclosure to enhance performance

American Audio XSP8P Powered Speaker $169.99 The American Audio XSP8P Powered Speaker represents American Audio's continuing commitment to high-quality audio products at affordable prices. The XSP8P speaker has an 8", 2-way active loudspeaker and a 100W bi-amplifier system encased in a lightweight cabinet. Other features include time-aligned crossover, an XLR mic/line input with volume control, and an ABS nylon fiber cabinet with handle and full grill.This America Audio speaker is designed for use as either a portable or a permanently installed unit. The speaker includes a pole-mount slot and rubber feet on the bottom for portable applications. The XSP8P powered speaker has rigging points on the top, bottom, and rear for permanent and flight installations.

American Audio Xsp8p Powered Speaker $169.99 The American Audio XSP8P Powered Speaker represents American Audio's continuing commitment to high-quality audio products at affordable prices. The XSP8P speaker has an 8", 2-way active loudspeaker and a 100W bi-amplifier system encased in a lightweight cabinet. Other features include time-aligned crossover, an XLR mic/line input with volume control, and an ABS nylon fiber cabinet with handle and full grill.This America Audio speaker is designed for use as either a portable or a permanently installed unit. The speaker includes a pole-mount slot and rubber feet on the bottom for portable applications. The XSP8P powered speaker has rigging points on the top, bottom, and rear for permanent and flight installations.8-inch, 2-way powered speaker100W built-in, bi-amplifier systemTime-aligned crossoverABS nylon fiber cabinet with handleFlyable or stand-mountableFull grillXLR mic/line input with volume control

Eminence Kappa Pro 15A 500W Pa Replacement Speaker 15 Inches $159.99 This subwoofer/woofer is great for all PA and musical instrument applications, including bass. It features a Kapton coil former for increased rigidity and thermal protection; a polyamide-coated, 2-layer, 27ga., copper voice coil for lower mass and increased sensitivity; 120oz. ferrite magnet; vented and extended core for increased power handling; die-cast aluminum basket for rigidity; a paper cone; cloth cone edge; and solid composition paper dust cap. Eminence recommends the Kappa Pro 15A as an alternate replacement speaker in the JBL JRX1515, the Yamaha S115V and BR15, the American Audio DLS-15P, and the Mackie SMR450 and SR1530z speaker cabinets.Kapton coil former for increased rigidity and thermal protection 2-layer, 27ga., copper voice coil for lower mass and increased sensitivity Ferrite magnet Vented and extended core for increased power-handling Die-cast aluminum basket for rigidity Paper cone Cloth cone edge Solid composition paper dust cap

Jbl Control 1 Pro Compact Speaker - Pair Black $164 The Control 1 Pro incorporates JBL Professional loudspeaker systems design. Featuring proven JBL transducer technologies, the Control 1 Pro is perfect for a wide variety of critical near-field audio applications. You can't go wrong with monitors from the company whose name is synonymous with cinema sound and was voted number one in the recording industry in 1976 (the heyday of recording) by studio professionals. Today, JBL monitors are used by Grammy winners such as Frank Fillipetti (Ray Charles, Korn, Billy Joel, Kiss) and Nate Kunkel (B.B. King, Sting, Crystal Method, Maroon 5). With independent, monitor-grade high- and low-frequency drivers, the Control 1 Pro Loudspeaker's professional crossover network provides steep slopes for exceptional sonic performance and incorporates full-range SonicGuard overload protection into the design ensuring network and transducer protection from excessive power surges from the amplifier. The Control 1 Pro's rugged and durable molded enclosure houses magnetically shielded transducers, making it ideal for use with video and computer monitors or other magnetically sensitive equipment. The JBL Control 1 Pro Audio Speaker's compact design makes it ideal for audio-visual applications, computer workstations, recording and broadcast studios, mobile audio-video control rooms, and foreground and background music. The Control 1 Pro can easily be mounted against a wall or other flat surface with the enclosed brackets or simply used as a bookshelf speaker.150 watts Continuous Power HandlingProfessional drivers and crossover networkIncluded mounting bracketTransparent and faithful sonic performanceMagnetically shielded transducersSonicGuard Overload Protection

American Audio XSP-12A Powered Speaker $299.99 The XSP-12A powered speaker boasts a 12", 2-way active loudspeaker and a 300W biamplifier system encased in a lightweight cabinet. It features a 1.75" compression driver, time-aligned crossover, XLR and RCA balanced inputs, a built-in mixer, and an ABS nylon fiber cabinet with handle and full grille.American Audio designed the XSP-12A speaker for use in both portable and permanently installed systems. The speaker includes a polemount slot and rubber feet on the bottom for portable applications. Rigging points on the top, bottom, and rear are provided and flight installations.

American Audio XSP-10A Powered Speaker $199.99 The XSP-10A powered speaker boasts a 10", 2-way active loudspeaker and a 200W biamplifier system encased in a lightweight cabinet. It features a 1" compression driver, time-aligned crossover, XLR and RCA balanced inputs, a built-in mixer, and an ABS nylon fiber cabinet with handle and full grille.American Audio designed the XSP-10A speaker for use in both portable and permanently installed systems. The speaker includes a polemount slot and rubber feet on the bottom for portable applications. Rigging points on the top, bottom, and rear are provided and flight installations.

American Audio XSP-15A Powered Speaker $399.99 The XSP-15A powered speaker boasts a 15", 2-way active loudspeaker and a 400W biamplifier system encased in a lightweight cabinet. It features a 1.75" compression driver, time-aligned crossover, XLR and RCA balanced inputs, a built-in mixer, and an ABS nylon fiber cabinet with handle and full grill. American Audio designed the XSP-15A speaker for use in both portable and permanently installed systems. The speaker includes a polemount slot and rubber feet on the bottom for portable applications. Rigging points on the top, bottom, and rear are provided and flight installations.

Eminence Kappa-15A 15 American Standard Speaker $129.99 The Eminence Kappa 15A replacement speaker is recommended for professional audio in a vented mid-bass enclosure. Eminence recommends the Kappa-15A as a alternate replacement speaker to the Delta Pro 15A in the Yamaha A15 and the Peavey PV115 .Nominal Basket Diameter: 15", 381mm Nominal Impedance: 8 ohms Power Rating: Watts, 450W; Music Program, 900W Resonance: 33Hz Usable Frequency Range: 52Hz-2.3kHz Sensitivity: 100.5 Magnet Weight: 80 oz. Gap Height: 0.375", 9.53mm Voice Coil Diameter: 3", 76.2mm

American Audio Xsp-15A Powered Speaker $399.99 The XSP-15A powered speaker boasts a 15", 2-way active loudspeaker and a 400W biamplifier system encased in a lightweight cabinet. It features a 1.75" compression driver, time-aligned crossover, XLR and RCA balanced inputs, a built-in mixer, and an ABS nylon fiber cabinet with handle and full grill.American Audio designed the XSP-15A speaker for use in both portable and permanently installed systems. The speaker includes a polemount slot and rubber feet on the bottom for portable applications. Rigging points on the top, bottom, and rear are provided and flight installations.15", 2-way powered speaker400W built-in, biamplifier systemNeodymium components1.75" compression driverTime-aligned electronic crossoverBuilt-in mixer with: 1 line input, 1 mic input, treble and bass Control, channel and master volumeBuilt-in RCA inputs1/4" XLR through outputXLR and RCA balanced inputsSeparate Microphone Volume ControlsABS nylon fiber cabinet with handleFlyable or stand-mountableFull grill

American Audio Xsp-10A Powered Speaker $199.99 The XSP-10A powered speaker boasts a 10", 2-way active loudspeaker and a 200W biamplifier system encased in a lightweight cabinet. It features a 1" compression driver, time-aligned crossover, XLR and RCA balanced inputs, a built-in mixer, and an ABS nylon fiber cabinet with handle and full grille.American Audio designed the XSP-10A speaker for use in both portable and permanently installed systems. The speaker includes a polemount slot and rubber feet on the bottom for portable applications. Rigging points on the top, bottom, and rear are provided and flight installations.10-inch, 2-way powered speaker200W built-in, biamplifier system1" compression driverTime-aligned electronic crossoverBuilt-in mixer with: 1 line input, 1 mic input, treble and bass Control, channel and master volumeBuilt-in RCA inputs1/4" XLR through outputXLR and RCA balanced inputsSeparate Microphone Volume ControlsABS nylon fiber cabinet with handleFlyable or stand-mountableFull grille

American Audio Xsp-12A Powered Speaker $299.99 The XSP-12A powered speaker boasts a 12", 2-way active loudspeaker and a 300W biamplifier system encased in a lightweight cabinet. It features a 1.75" compression driver, time-aligned crossover, XLR and RCA balanced inputs, a built-in mixer, and an ABS nylon fiber cabinet with handle and full grille.American Audio designed the XSP-12A speaker for use in both portable and permanently installed systems. The speaker includes a polemount slot and rubber feet on the bottom for portable applications. Rigging points on the top, bottom, and rear are provided and flight installations.12-inch, 2-way powered speaker300W built-in, biamplifier systemNeodymium components1.75" compression driverTime-aligned electronic crossoverBuilt-in mixer with: 1 line input, 1 mic input, treble and bass Control, channel and master volumeBuilt-in RCA inputs1/4" XLR through outputXLR and RCA balanced inputsSeparate Microphone Volume ControlsABS nylon fiber cabinet with handleFlyable or stand-mountableFull grill

Used Eminence Kappa Pro 15A 500W Pa Replacement Speaker 15 Inches $145.59 This subwoofer/woofer is great for all PA and musical instrument applications, including bass. It features a Kapton coil former for increased rigidity and thermal protection; a polyamide-coated, 2-layer, 27ga., copper voice coil for lower mass and increased sensitivity; 120oz. ferrite magnet; vented and extended core for increased power handling; die-cast aluminum basket for rigidity; a paper cone; cloth cone edge; and solid composition paper dust cap. Eminence recommends the Kappa Pro 15A as an alternate replacement speaker in the JBL JRX1515, the Yamaha S115V and BR15, the American Audio DLS-15P, and the Mackie SMR450 and SR1530z speaker cabinets.Kapton coil former for increased rigidity and thermal protection 2-layer, 27ga., copper voice coil for lower mass and increased sensitivity Ferrite magnet Vented and extended core for increased power-handling Die-cast aluminum basket for rigidity Paper cone Cloth cone edge Solid composition paper dust cap

American Audio DLS-15P 15 2-Way Powered Speaker $279.99 The American Audio DLS-15P 15" 2-way Speaker has a die-cast 15" woofer with 3" voice coil and a high-frequency compression horn housed in a trapezoidal ABS cabinet with built-in 300W power amplifier. With 2 mic inputs (XLR and 1/4" stereo) with mic volume control, XLR and RCA line inputs, and controls for bass, treble, and volume, you can use the American Audio PA speaker as a self-contained sound system. The DLS-15P speakers can be flown, stand-mounted, or used on the floor as a monitor with included brackets.

Galaxy Audio Multi Mixer $79.99 The Multi Mixer is a great tool for live sound, home recording, field recording, audio/video, and many others. This unit features 4 inputs; channels 1 & 2: XLR / 1/4" combo with -20dB pad, channel 3: Stereo RCA and Stereo 1/8" mini (3.5mm), channel 4: Stereo RCA. Each channel has its own volume control. It also features numerous outputs including XLR, 14", stereo RCA, and a stereo headphone output with a volume control.It will run off of 2 AA batteries for about 15 hours, or an optional DC power supply. It will supply +24V phantom power to microphones. It is great for: 1) Adding inputs to an existing mixer by creating a sub-mix of two or more sources before sending the signals to the main mixer or powered speaker. 2) Serving as a sophisticated cable adapter that not only adapts the connector type but also provides the correct impedance with adjustable level control. 3) Serving as the main mixer for solo or duo acts as well as AV presentations. 4) As a mixer for rehearsals when its impractical to set up the entire PA. 5) Interfacing pro audio gear with consumer audio gear. 6) Battery operation allows remote location use where AC power is unavailable. 7) As an emergency back-up mixer to have along just in case.

Vocopro Krs-3 Karaoke Mixer And Speaker Package $559 The VocoPro KRS-3 Karaoke Mixing Amplifier with Speaker Package includes the KR-3808 PRO 300W Digital Karaoke Mixing Amplifier, 2 SV-500 10" 3-Way Vocal Speakers, and 2 BNB-30 Speaker Cables.KR-3808 PRO Digital Karaoke Receiver with Key Control The KR-3808 PRO is a Digital Karaoke Receiver with a built in AM/FM tuner that allows you to connect up to three audio/video devices (DVD, CD players, etc.) as well as three microphones at once for a complete vocal experience. There is also a handy 1/8" audio input right on the front panel to connect your MP3 player or laptop.Digital Key Control, echo effects and mixing controls provide the ability to enhance music and vocals to improve your vocal performance.The KR-3808 PRO combines home entertainment capabilities with professional features providing a powerful, yet easy to use system for any vocal setup.SV-500 10" 3-way vocal speaker: VocoPro asked customers for feedback on the shortcomings of the Karaoke hardware industry and were told that a major issue was the absence of quality Karaoke speakers designed "specifically" for vocals. Most all Hi-Fi and P.A. speakers out there were either too "bottom heavy" lacking in midrange, or too "hyperactive" with excessive treble response leading to annoying feedback. To resolve this problem, VocoPro has introduced the SV Series Vocal Speakers.SV-500 speakers feature a 10" Coated woofer with high temperature voice coil, dual 3" cone midrange drivers for enhanced fidelity, and a center mounted 1" cone tweeter with Kapton voice coil. PTC Protection Circuitry prevents against blown tweeters. Power rating is 250W max/120W RMS. SV-500 speakesr can be mounted on stands or permanenetly mounted on walls or from ceilings. (Mounting adapter not included)KR-3808 PRO: 9-step Digital Key Controller for transposing natural key of source music Built-in AM/FM Tuner with 60 Programmable Station Presets (30 AM, 30 FM) Digital Echo with Repeat and Delay controls to add depth and space to vocals Three Microphone Inputs with individual Volume controls Full-function remote control for ease of operation Master Music and Microphone Volume controlsSV-500 10" 3-way vocal speaker: 10" Coated woofer with high temperature voice coilDual 3" cone midrange drivers for enhanced fidelityCenter mounted 1" cone tweeter with Kapton voice coilPTC Protection Circuitry prevents against blown tweetersMetal speaker grillsMatte Finish

*************************************************************
If you didn"t find what you wanted look below for Audio Speaker Pro in the Amazon Marketplace.
*************************************************************

*************************************************************

Macbook Pro User Guide

1) First steps (a) Unpacking

Remove your Mac Book Pro from the box and place it on a firm surface near an electric socket. In the box, you should also have

• an 85W MagSafe Power Adaptor
• a power cord
• a DVI to VGA adaptor

(b) Charging

Strip the plastic film from the 85W MagSafe Power Adaptor. Ensure the plug sits properly in the Power Adaptor and place it in the electric socket. Take the other end of the Power Adaptor lead and connect it to the magnetic MagSafe power port on the left-hand side of your MacBook Pro.

If the Power Adaptor lead won’t stretch to your nearest electric socket, remove the plug from the adaptor by pulling it up. Beneath the plug is a socket. Insert one end of the power cord into the adaptor socket and the other into the electric socket.

Please note: always disconnect your MacBook Pro from the electricity by pulling the plugs and not the leads.

An amber light on the MagSafe connector at the power port tells you the MacBook Pro battery is charging. When a green light appears, the battery is fully charged. If no light appears, check the connections and make sure you’ve switched on the electric socket.

(c) Basic features

When you open your MacBook Pro, you’ll find

• an iSight camera and camera indicator light at the top of the screen
• stereo speakers either side of the keyboard
• a power button on the right of the keyboard
• a microphone to the left of the keyboard
• a trackpad and a trackpad button

From left to right along the front edge of the MacBook Pro are

• an infrared (IR) receiver
• a sleep mode indicator light
• a display release button
• a slot-loading SuperDrive

From left to right on the left-hand side of your MacBook Pro are

• a MagSafe power port
• one USB 2.0 port (15 inch model); two USB 2.0 ports (17 inch model)
• an audio line in/optical digital audio in port
• a headphone out/optical digital audio out port
• an ExpressCard/34 slot

From left to right on the right-hand side of your MacBook Pro are

• a security slot for a cable and lock
• a USB 2.0 port
• a FireWire 400 port
• a FireWire 800 port
• a Gigabit Ethernet port (10/100/1000Base-T)
• a DVI port

Underneath your MacBook Pro is the battery. The battery has a row of indicator lights and a button.

2) Initial set-up (a) Setup Assistant

Switch on your MacBook Pro by pressing the power button. Setup Assistant will come up on the screen.

Setup Assistant takes you through the process of establishing your user account and your email and Internet details. If you have another Mac and want to carry files and applications from it to your MacBook Pro, Setup Assistant will show you how. If you want to transfer such information at a later date, use Migration Assistant instead.

• Select the Applications folder
• Open Utilities
• Double-click Migration Assistant

If you have another Mac you don’t intend to use in the future, and you’ve bought music, audiobooks, films or TV shows with iTunes, de-authorise the computer. For more details, go to the iTunes Help menu and select iTunes Help.

(b) Internet connection

You can connect wirelessly to the Internet using your MacBook Pro’s built-in AirPort Extreme facility. For more information

• go to the Menu Bar
• select Help>Mac Help
• search for “AirPort”

Alternatively, connect an Ethernet cable to the port on the right-hand side of your MacBook Pro. Place the other end in a cable modem, DSL modem or network.

For a dial-up Internet connection

• buy an external Apple USB Modem
• place it in one of your MacBook Pro’s USB ports
• connect a phone lead from a phone jack to the modem

(c) Sleep mode

Use the sleep mode on your MacBook Pro if you stop work for a short period. To start the sleep mode, you have the following choices:

• select Apple>Sleep on the Menu Bar
• close the screen
• press the power button and select sleep in the dialogue box
• select Apple>System Preferences; choose Energy Saver; set the timer

Please note: don’t move your MacBook Pro until the sleep indicator light on the front edge comes on. This tells you the hard disc has stopped. If you move the MacBook Pro with the disc still spinning, you can damage the disc and lose data.

To wake your MacBook Pro from sleep mode:

• open the screen if you closed it, or
• if the screen is open, press any key or the power button

(d) Shut down

If you’ve finished work on your MacBook Pro for the day, shut it down by either

• selecting Apple>Shut Down on the Menu Bar, or
• pressing the power button and selecting Shut Down in the dialogue box

3) Using the trackpad

With the trackpad, you can:

• scroll
• Click
• double-click
• drag
• move the pointer

To control the distance you send the pointer across the screen, adjust the speed of your finger on the trackpad:

• Move your finger slowly to send the pointer a short distance
• Move your finger fast to send the pointer further

Other features of the trackpad include the following:

• Two finger scrolling. Scroll in any direction by making the same movements with two fingers on the trackpad.
• Secondary or right clicking. Use shortcut menu commands by placing two fingers on the trackpad and clicking the trackpad button.

Some trackpad features apply to certain applications:

• Two finger rotating. By rotating two fingers on the trackpad, you can turn images and text.
• Two finger pinching. By pinching together and pushing apart two fingers on the trackpad, you can zoom in or out.
• Three finger swiping. Flick through a series of images or the pages of a document by swiping three fingers on the trackpad.

If you want to fine-tune and set trackpad options

• select Apple>System Preferences
• click Keyboard & Mouse
• click Trackpad

For more information

• select Help>Mac Help
• click Trackpad

4) Quick Mac OS X guide (a) Introduction

Your MacBook Pro has the Mac OS X v10.5 Leopard operating system. This controls your applications, files and peripheral devices, and works in a similar fashion to Windows.

(b) The basics

Your basic controls are the keyboard and trackpad. Windows users find they have to use the keyboard and trackpad fewer times on the MacBook Pro to achieve comparable results.

(c) Main features

To help you manage and navigate everything successfully on your MacBook Pro, there are four main features:

• Desktop
• Dock
• Finder
• Menu bar

Desktop

Desktop is your starting point each time you use your MacBook Pro. It stores items such as files and images.

The first icon you’ll come across on Desktop is the Macintosh HD (hard drive). Other icons appear when you use the various functions of your MacBook Pro. To view an icon’s files and applications, double-click it.

Also note that

• if you connect a device to your MacBook Pro, an icon appears on the Desktop

if you allow other users on your MacBook Pro, each one can have a Desktop

• when you run applications, Desktop always lies behind them

Dock

The Dock is a row of icons lying at the bottom of your MacBook Pro screen. Click on an icon to reach the files and applications it contains.

When a window appears on the screen, it has three buttons in the top left corner.

• The red button closes the window
• The yellow button minimises the window to the Dock
• The green button maximises and minimises the window’s size

Finder

The icon on the far left of the Dock is the Finder. Use the Finder to navigate and manage your MacBook Pro’s files and applications.

Menu Bar

The Menu Bar is a line at the top of the MacBook Pro’s screen.

With the Menu Bar, you can

• see recent work
• view and adjust settings and applications
• end applications
• interact with a programme
• log in and out
• put the MacBook Pro into sleep mode
• begin restart
• switch off your MacBook Pro

Customising desktop

To customise Desktop, select the System Preferences icon in the Dock or Apple>System Preferences on the Menu Bar. For more details of what you can do, select Mac Help and search for System Preferences or for the item you want to change.

5) Connectivity

Your MacBook Pro has a comprehensive range of ports for printers, phones, iPods, cameras, joysticks, hard drives and so on. As well as USB 2.0 ports, you have a FireWire 400 and a FireWire 800. These are ideal for connecting high speed devices such as video cameras.

The DVI port allows you to connect a monitor, TV or projector. If you have a VGA device, then simply use the supplied DVI/VGA adaptor.

Use the audio line in/optical digital audio in port to connect digital audio equipment or a microphone. Use the headphone out/optical digital audio out port for audio equipment, headphones or speakers.

The ExpressCard/34 slot accepts all standard 34mm ExpressCards. Please note that when you want to remove a card, push it gently first.

6) Battery

When you use the MacBook Pro without the MagSafe Power Adaptor, the time you can run the computer depends on your applications and the peripheral devices that are draining the battery’s power. You can save battery energy by removing unnecessary devices and by switching off your AirPort Extreme and Bluetooth® features when you’re not using them.

Press the button on the battery to check the energy level. The lights at the side of the button tell you how much charge you have left, if any. You can also inspect the battery level by simply checking the battery status icon in the Menu Bar.

The battery can be charged at any time. You’ll find you can charge it more quickly, however, when your MacBook Pro is in sleep mode or switched off.

If you want to replace a failing battery with a full charged one, always shut down your MacBook Pro first.

Mac computers

About the Author

Ben T Wilson writes about Mac computers, such as  the imac computers.