Adaptors Interchange Mics
Adaptors Interchange Mics
 |
 20 PAK QUICK RELEASE MICROPHONE CLIPS ADAPTORS  US $119.97
|
 6 QUICK RELEASE MIC CLIPS ADAPTORS INTERCHANGE MICS US $38.97
|
 On Stage QK2 C Quick Release Microphone Adapter Chrome US $9.95
|
 3 QUICK RELEASE MIC CLIPS ADAPTORS US $25.97
|
 6 QUICK RELEASE MICROPHONE CLIPS ADAPTORS US $38.97
|
 On Stage QK2 B Quick Release Microphone Adapter US $9.95
|
 WIRELESS MICROPHONES PROFESSIONAL AUDIO UHF KARAOKE DJ US $329.98
|
 Shure Beta 181 C Instrument Mic US $499.00
|
 Shure Beta 181 O Instrument Mic US $499.00
|
 Shure Beta 181 Bi Instrument Mic US $499.00
|
 Shure Beta 181 S Instrument Mic US $499.00
|
 10 PAK QUICK RELEASE MIC CLIPS ADAPTORS CHANGE MICS US $105.25
|
 6 BLACK POWDER COATED QUICK RELEASE MIC CLIPS ADAPTORS US $55.96
|
 12 PAK QUICK RELEASE MIC CLIPS ADAPTORS CHANGE MICS US $84.47
|
 On Stage Stands QK2 C Quick Release Mic Adapter US $13.99
|
 On Stage Stands QK2 B Quick Release Mic Adapter US $13.99
|
 24 PAK QUICK RELEASE MICROPHONE CLIPS ADAPTORS US $149.47
|
 Shure Beta 181 O Omnidirectional Instrument Microphone US $499.00
|
 Shure Beta 181 C Cardioid Instrument Microphone US $499.00
|
 9 PAK QUICK RELEASE MICROPHNE CLIP ADAPTOR CLIPS US $65.97
|
|
|
Bach Mouthpiece Extensions And Adaptors Trumpet Mouthpiece Extension $17.99 Bach Mouthpiece Adapters and Mouthpiece Extensions allow the player to use their favorite mouthpiece on other instruments that may not be built for that particular mouthpiece. Bach Mouthpiece Adaptors allow mouthpieces with a smaller shank to be used on larger shank instruments. This allows the player to stay on the same mouthpiece when changing horns. Bach Mouthpiece Adaptors are available for a variety of instruments. Bach Mouthpiece Extensions allow the player to adjust the tuning of the instrument by allowing the mouthpiece to move further out of the receiver. Bach Mouthpiece Extensions are available for trumpet and small shank tenor trombone mouthpieces. |
|
|
Lp Cajon Microphone Mount For Audix Mics $12 This LP Cajon Microphone Mount is designed to fit an Audix ADX-60 mic. Accurately capturing the extensive sonic range of a cajon with a single microphone is a daunting task. But thanks to an imaginative new mounting system created by acoustic designer Hector Torres, that task has been accomplished. Accomplished so well, in fact, that LP artist Kevin Ricard is now using it on American Idol. The heart of the patent-pending system is a sculpted hardwood microphone holder. This holder allows the mic it contains to be placed anywhere on the rear surface of a cajon in order to achieve the optimum sound. Hook-and-loop fastener strips let you position the unit in different locations to enhance the desired effect. The microphone itself is held 3mm above the surface of the cajon in order to pick up the punch of the bass tones along with all of the more subtle sounds. The compact and flexible design of the LP Cajon Mic system eliminates the need for permanently mounted internal mics, or for external mics whose stands can often get in your way. The greatest cajon playing in the world is wasted if the intended audience can't hear it. Make sure your great playing reaches your audience with the help of the LP Cajon Mic Mount.Fits an Audix ADX-60 Designed by Hector Torres Used by Kevin Ricard on American Idol Sculpted hardwood microphone holder allows the mic it contains to be placed anywhere on the rear surface of a cajon in order to achieve the optimum sound Hook-and-loop fastener strips let the player position the unit in different locations to enhance the desired effect Compact and flexible design eliminates the need for permanently mounted internal mics, or for external mics whose stands can often get in the player's way |
|
|
Gator Gm-4 Microphone Bag For 4 Mics $29.99 The GM-4 Mic Bag has 4 padded microphone drops and a slot for a beltpack. The exterior has a large pocket for cables. It comes with a comfortable top carrying strap and shoulder strap. The microphone bag is made for heavy usage from 600-denier ballistic material.Perfect for transporting 4 mics and cablesDurable 600-denier nylon exteriorShoulder strap4 vertical microphone slots and a place for belt packs or accessoriesExternal dual pocket for cables and accessoriesAxis foam protection |
|
|
LP Cajon Microphone Mount For Audix Mics $12 This LP Cajon Microphone Mount is designed to fit an Audix ADX-60 mic. Accurately capturing the extensive sonic range of a cajon with a single microphone is a daunting task. But thanks to an imaginative new mounting system created by acoustic designer Hector Torres, that task has been accomplished. Accomplished so well, in fact, that LP artist Kevin Ricard is now using it on American Idol. The heart of the patent-pending system is a sculpted hardwood microphone holder. This holder allows the mic it contains to be placed anywhere on the rear surface of a cajon in order to achieve the optimum sound. Hook-and-loop fastener strips let you position the unit in different locations to enhance the desired effect. The microphone itself is held 3mm above the surface of the cajon in order to pick up the punch of the bass tones along with all of the more subtle sounds. The compact and flexible design of the LP Cajon Mic system eliminates the need for permanently mounted internal mics, or for external mics whose stands can often get in your way. The greatest cajon playing in the world is wasted if the intended audience can't hear it. Make sure your great playing reaches your audience with the help of the LP Cajon Mic Mount. |
|
|
Skb Injection Molded Case For 3 Mics $69.99 The SKB 3I-0907-MC3 holds three mics in a very compact case and is part of the 3I Waterproof Series of cases. 3I Series injection-molded, waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof and airtight, submersible design that is resistant to corrosion and impact damage.Its continuous molded-in hinge, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve all contribute to its military-grade design. The interior foam is cut on the new waterjet machine SKB is now using to cut custom foam and design new products. The case has convoluted foam in the lid for a compression fit. The SKB 3i-0907-MC3 is allows for 3 mics to stored horizontally, measures 9" x 7" x 4" deep, and is the most compact 3-mic case on the market.Rugged constructionPadded interiorWaterproofTrigger release latchesCovered by SKB's "Million Mile" Lifetime Guaranty. |
|
|
Skb Injection-Molded Microphone Case For 24 Mics $209.99 This Injection-Molded Microphone Case is SKB's largest mic case and vertically stores up to 24 mics. It's extra-deep to accommodate longer, condenser mics. The SKB mic case includes a large, padded accessory compartment for storage of cables, mic clips, or other mic essentials and it's part of SKB's 3I Waterproof Series. This waterproof mic case is constructed of ultra high-strength polypropylene, copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge; patented "trigger release" latch system; comfortable, snap-down rubber, over-molded cushion-grip handle; secure stacking; and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to the SKB mic case's military-grade design.The interior foam of the mic case is cut on the new water jet machine SKB now uses to cut custom foam and design new products. The case has convoluted foam in the lid for a compression fit. It also features an injection-molded pull handle along with in-line skate wheels. The 3I-2015-MC24 microphone case measures 20" x 15" x 10".Ultra high-strength polypropylene, copolymer resinUV, solvent, corrosion, and fungus-resistant (MIL-STD-810F)Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)Automatic ambient pressure equalization value (MIL-STD-648C & IP67)Resistant to corrosion and impact damageContinuous molded-in hingePatent pending "trigger release" latch systemRubber, over-molded cushion-grip handleCustom-cut foam to hold twenty-four microphonesIn-line skate wheelsManufacturer's model number: 3I-2015-MC24Covered by SKB's "Million Mile" lifetime guaranty |
|
|
Skb Injection-Molded Microphone Case For 6 Mics $69.99 This Injection-Molded SKB microphone case holds six mics in a very compact case and is part of SKB's 3I Waterproof Series of cases. 3I Series, injection-molded, waterproof cases are constructed of ultra high-strength polypropylene, copolymer resin and feature a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge; patented "trigger release" latch system; comfortable, snap-down rubber, over-molded cushion-grip handle; secure stacking; and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military-grade design.The interior foam of this microphone case is cut on the new water jet machine SKB now uses to cut custom foam and design new products. The mic case has convoluted foam in the lid for a compression fit. This case allows for three mics to be stored horizontally on two separate layers of foam. The 3I-0907-MC6 microphone case measures 9" x 7" x 6" and is one of the most compact, 6-mic cases on the market.Ultra high-strength polypropylene, copolymer resinUV, solvent, corrosion, and fungus-resistant (MIL-STD-810F)Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)Automatic ambient pressure equalization value (MIL-STD-648C & IP67)Resistant to corrosion and impact damageContinuous molded-in hingePatent pending "trigger release" latch systemRubber, over-molded cushion-grip handleCustom-cut foam to hold six microphonesManufacturer's model number: 3I-0907-MC6Covered by SKB's "Million Mile" lifetime guaranty |
|
|
Skb Injection-Molded Microphone Case For 16 Mics $139.99 This injection-molded SKB microphone case holds sixteen mics, stored vertically in a compact, waterproof case. The SKB mic case is constructed of ultra high-strength polypropylene, copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67) that is resistant to corrosion and impact damage. Its continuous molded-in hinge; patented "trigger release" latch system; comfortable, snap-down rubber, over-molded cushion-grip handle; secure stacking; and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to this SKB mic case's military-grade design.The interior foam is cut on the new water jet machine SKB now uses to cut custom foam and design new products. The SKB case has convoluted foam in the lid for a compression fit. This microphone case holds up to 16 mics securely with two-step mic holes designed to secure any type of microphone. In addition, the 3I-2011-MC16 case includes a generous, padded storage compartment for cables and mic clips. The SKB mic case measures 20" x 11" x 8".Ultra high-strength polypropylene, copolymer resinUV, solvent, corrosion, and fungus-resistant (MIL-STD-810F)Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)Automatic ambient pressure equalization value (MIL-STD-648C & IP67)Resistant to corrosion and impact damageContinuous molded-in hingePatent pending "trigger release" latch systemRubber, over-molded cushion-grip handleCustom-cut foam to hold 16 microphonesManufacturer's model number: 3I-2011-MC16Covered by SKB's "Million Mile" lifetime guaranty |
|
|
Gator Gm Padded Gig Bag For Microphones 2 Mics $54.99 The Gator GM-12B Padded Mic Gig Bag assures that your mics travel in safety. Holds up to 12 microphones, so you can keep sets organized for convenience. Interior dividers separate mics and prevent damage. Made of durable nylon with a handle and a comfortable padded shoulder strap for transport. Exterior pocket holds cables and other accessories.Durable 600-Denier nylon construction.Designed to hold up to 12 microphones.Exterior pocket for cables & accessories.#10 Zipper.Padded shoulder strap for comfort. |
|
|
Gator Gm Padded Gig Bag For Microphones 12 Mics $49.99 The Gator GM-12B Padded Mic Gig Bag assures that your mics travel in safety. Holds up to 12 microphones, so you can keep sets organized for convenience. Interior dividers separate mics and prevent damage. Made of durable nylon with a handle and a comfortable padded shoulder strap for transport. Exterior pocket holds cables and other accessories.Durable 600-Denier nylon construction.Designed to hold up to 12 microphones.Exterior pocket for cables & accessories.#10 Zipper.Padded shoulder strap for comfort. |
|
|
Behringer Pmp4000 / B212xl Mains Monitors & Mics Package $1099.99 The Behringer PMP4000 / B212XL Mains and Monitors PA package is a cost-effective collection of live sound gear to help you monitor, capture, mix, and project your live performances more powerfully for less. The package includes: 1 BEHRINGER EUROPOWER PMP4000 Powered Mixer 4 B212XL 12" 800W Passive Titanium PA Speakers 2 Nady StarPower 1 Microphones 2 1/4" to 1/4" Speaker Cables (25' each) 2 XLR Microphone Cables (20' each) 2 Speakon to 1/4" Speaker Cables (25' each) 2 Standard Speaker Stands BEHRINGER EUROPOWER PMP4000 Powered Mixer The BEHRINGER EUROPOWER PMP4000 Powered Mixer (2 x 800W stereo, 1600W bridged mode) produces even more power than its predecessors while maintaining famously low weight and high efficiency. The EUROPOWER PMP4000 mixer employs Class-D technology including a switch-mode power supply, significantly reducing weight and heat. The 16-channel BEHRINGER PMP4000 offers 8 built-in XENYX mic preamps, 24-bit FX processor with 100 presets, and FBQ Feedback Detection. What is Class-D Technology? Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off, which significantly reduces power losses from the output devices given off as heat. Less heat means the amps don't need massive heat sinks, and that makes them lighter. This no-compromise design means the EUROPOWER PMP4000 mixer will deliver full power with incredible fidelity all night long, without the need for lengthy rest cycles. When used in conjunction with switching-mode power supplies, which don't require huge and heavy transformers, BEHRINGER's Class-D amplifiers provide tremendous dynamic punch and superior fidelity. The resulting speaker systems are much lighter, making them easy to transport and set up. Massive Mono or Stunning Stereo EUROPOWER PMP4000 gives you the choice of 2 x 800-Watt stereo, 2 x 800-Watt dual mono mode (giving you a mono version of the main signal through one powered output plus a mono version of all monitor send signals through the second powered input) or 1,600-Watt bridged mono sound. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the EUROPOWER PMP4000 mixers can accommodate. This sonic versatility also makes it an excellent choice for churches, where vocals and stereo recordings often share face time. Classic Control, State-of-the-Art Sound Leave the mic preamps at home, because the quality of sound that was once only available in the studio is ready to go wherever you do. Built-in, boutique-caliber mic preamps with switchable +48 V phantom power make it possible to use either dynamic or condenser mics with the EUROPOWER PMP4000. It gives you 8 mic inputs. Built-in Digital Effects Processor The EUROPOWER PMP4000 comes equipped with a 24-bit FX processor, giving you 100 mind-blowing digita |
|
|
Behringer Pmp6000 / B212xl Mains Monitors & Mics Package $1149.99 The Behringer PMP6000 / B212XL Mains and Monitors PA Package is an inexpensive collection of Behringer technology to monitor, capture, mix, and project your live performances. The package includes all the accessories you need to complete your live sound setup.The package includes:1 BEHRINGER EUROPOWER PMP6000 Powered Mixer4 B212XL 12" 800W Passive Titanium PA Speakers2 Nady StarPower 1 Microphones2 1/4" to 1/4" Speaker Cables (25' each)2 XLR Microphone Cables (20' each)2 Speakon to 1/4" Speaker Cables (25' each)2 Standard Speaker StandsBERHRINGER EUROPOWER PMP6000 Powered MixerThe BEHRINGER EUROPOWER PMP6000 Powered Mixer (2 x 800W stereo, 1600W bridged mode) produces even more power than previous mixers while maintaining famously low weight and high efficiency. The BEHRINGER EUROPOWER PMP6000 mixer employs Class-D technology including a switch-mode power supply, significantly reducing weight and heat. The 20-channel BEHRINGER PMP6000 features 12 built-in XENYX mic preamps, 2 studio-grade 24-bit FX processors with 100 presets, and FBQ Feedback Detection.What is Class-D Technology?Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off, which significantly reduces power losses from the output devices given off as heat. Less heat means the amps don't need massive heat sinks, and that makes them lighter. This no-compromise design means the EUROPOWER PMP6000 mixer will deliver full power with incredible fidelity all night long, without the need for lengthy rest cycles.When used in conjunction with switching-mode power supplies, which don't require huge and heavy transformers, BEHRINGER's Class-D amplifiers provide tremendous dynamic punch and superior fidelity. The resulting speaker systems are much lighter, making them easy to transport and set up.Massive Mono or Stunning StereoEUROPOWER PMP6000 gives you the choice of 2 x 800-Watt stereo, 2 x 800-Watt dual mono mode (giving you a mono version of the main signal through one powered output plus a mono version of all monitor send signals through the second powered input) or 1,600-Watt bridged mono sound. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the EUROPOWER PMP6000 mixers can accommodate. This sonic versatility also makes it an excellent choice for churches, where vocals and stereo recordings often share face time.Classic Control, State-of-the-Art SoundLeave the mic preamps at home, because the quality of sound that was once only available in the studio is ready to go wherever you do. Built-in, boutique-caliber mic preamps with switchable +48 V phantom power make it possible to use either dynamic or condenser mics with the EUROPOWER PMP6000. It gives you 12 mic inputs.Built-in Digital Effects ProcessorThe EUROPOWER PMP6000 comes equipped with dual 2 |
|
|
Cloud Cloudlifter Cl-2 Phantom Powered Gain Booster For Dynamic And Ribbon Mics $249 The CL-2 is a dual mono Cloudlifter (see # H73309). The CL-2 offers two independent channels of up to +25db of ultra-clean gain, for passive microphones, inline using phantom power.There are certain mics revered for their sound quality. Among them are passive ribbon mics, such as the Royer R121 (#581141 or MXL R40 (#H69305), and low-sensitibity dynamic mics, such as the Shure SM7B (#270247) and the Electro-Voice RE20 (#270009). But if your preamp doesn't have enough gain or the right impedance requirements, these mics won't perform well. So what do you do if you can't afford a high-end preamp with tons of gain? The Cloud Microphones Cloudlifter CL-1 Mic Activator is the solution.The Cloudlifters address problems due to gain and impedance requirments by giving passive microphone signals a major inline boost, up to +25db of ultra-clean gain, while properly loading the microphones transformer for transparent operation. The Cloudlifter CL-1 is self contained, driven only by the phantom power from your mixer or preamp. Ideal for dynamics and ribbons alike, the CL-1 turns phantom power into the extra gain required for using passive microphones. The immediate dose of extra gain can make even a budget microphone/preamp combination sound clean and professional. For broadcasting and live sound, the active output signal of the CL-1 can prevent added noise over long cable runs. With endless uses, Cloudlifters are quickly becoming a standard addition to professional, project and home studios.In use with multi-mic recording:Top engineers have taken to using stereo ribbon mics, as well as pairs of SM7Bs as drum overheads to create a rich, powerful texture for drums. Another use for dual ribbons is on a guitar cab set up in stereo, fed by a two amp heads or a stereo amp. If you have a 2-channel preamp that doesn't have the gain/impedance requirements you need, a Cloudlifter CL-2 is just the ticket.Read what the pros are saying about the Cloudlifter:"It's simply about gain - the Cloudlifter is a clever and useful solution..." - Rob Tavaglione, Pro Audio Review February 2010"The Cloudlifter is a winner. It solves problems some ribbon-mic owners dont even know they have. It does exactly what it claims to do, and does so well." - Matthew Mcglynn, Recording Hacks February 2010Gives passive microphones up to +25dB of ultra clean gain; no need to reinvest in an expensive, high-gain premapDual-mono operation for multi-mic or stereo applicationsSelf-contained, driven only by the phantom power from your mixer or preampActive output signal prevents added noise over long cable runs |
|
|
Audio-Technica At8464-Th Dual Ear Mount For Microset Headworn Mics $29.99 The dual-ear Audio-Technica AT8464-TH microphone mount converts your single ear-worn Audio-Technica BP892 or AT892 MicroSet mics (sold separately) to dual-ear-worn headsets for maximum stability and comfort. The Audio-Technica BP892 mic fits on either side of the dual-ear microphone mount, so you can wear your mic on either side of your mouth. The AT8464 mic mount's headband easily adjusts to fit both children and adults.Compatible with all BP892 and AT892 MicroSet models Adjustable headband Allows mic to be on right or left side of mouth Beige colored |
June 26th, 2008 in
Microphones